Abstract:We develop a hybrid optofluidic microcavity by placing a microsphere with a diameter ranging from 1 to 4 μm in liquid-filled plano-plano Fabry–Perot (FP) cavities, which can provide an extremely low effective mode volume down to 0.3–5.1 μm3 while maintaining a high Q-factor up to 1×104–5×104 and a finesse of ∼2000. Compared to the pure plano-plano FP cavities that are known to suffer from the lack of mode confinement, diffraction, and geometrical walk-off losses as well as being highly susceptible to mirror misalignment, our microsphere-integrated FP (MIFP) cavities show strong optical confinement in the lateral direction with a tight mode radius of only 0.4–0.9 μm and high tolerance to mirror misalignment as large as 2°. With the microsphere serving as a waveguide, the MIFP is advantageous over a fiber-sandwiched FP cavity due to the open-cavity design for analytes/liquids to interact strongly with the resonant mode, the ease of assembly, and the possibility to replace the microsphere. In this work, the main characteristics of the MIFP, including Q-factor, finesse, effective mode radius and volume, and their dependence on the surrounding medium’s refractive index, mirror spacing, microsphere position inside the FP cavity, and mirror misalignment, are systematically investigated using a finite-element method. Then, by inserting dye-doped polystyrene microspheres of various sizes into the FP cavity filled with water, we experimentally realize single-mode MIFP optofluidic lasers that have a lasing threshold as low as a few microjoules per square millimeter and a lasing spot radius of only ∼0.5 μm. Our results suggest that the MIFP cavities provide a promising technology platform for novel photonic devices and biological/chemical detection with ultra-small detection volumes.

Optofluidic jet waveguide for laser-induced fluorescence spectroscopy

High sensitivity UV fluorescence spectroscopy based on an optofluidic jet waveguide

High-Q, Low-Mode-volume Microsphere-Integrated Fabry–Perot Cavity for Optofluidic Lasing Applications

Coiled Optical Nanofiber for Optofluidic Absorbance Detection.

Ultra-Sensitive Nanofiber Fluorescence Detection In A Microfluidic Chip

Laser-induced Fluorescence Detection System for Microfluidic Chips Based on an Orthogonal Optical Arrangement.

Creating Attoliter Detection Volume by Microsphere Photonic Nanojet and Fluorescence Depletion

Combined fluorescence with absorbance detection optical system used for microfluidic chips

Microfluidic Chip Detection Instrument With High Signal-To-Noise Ratio

Laser-induced fluorescence detection platform for point-of-care testing

A microfluidic chip for absorbance measurements with long optical path-length based on a liquid-core waveguide technique

Optimization of Laser Induced Fluorescence Detection System for Integrated Capillary Electrophoresis Chip

Low-cost fluorescence microscope with microfluidic device fabrication for optofluidic applications

A multi-sample analysis method with spatial resolution based on a single-longitudinal-mode fiber optofluidic microring laser

Simultaneous bright-field and fluorescence lensless imaging with high excitation light extinction for microfluidics applications

A Compactly Integrated Laser‐induced Fluorescence Detector for Microchip Electrophoresis

Development Of Laser-Induced Fluorescence Detector For Deoxyribonucleic Acid Fragments Seperation By Microfluidic Chip

High-speed, Whole-Column Fluorescence Imaging Detection for Isoelectric Focusing on a Microchip Using an Organic Light Emitting Diode As Light Source.

A handheld laser-induced fluorescence detector for multiple applications

Liquid-core waveguide TCSPC sensor for high-accuracy fluorescence lifetime analysis

Handheld Laser-Induced Fluorescence Detection Systems with Different Optical Configurations.