Abstract:High speed permanent magnet synchronous machines (HSPMSMs) are evolving rapidly due to their high-power density, high efficiency and wide speed range. However, the rated frequency often exceeds 1kHz while the switching frequency of conventional Insulated Gate Bipolar Transistor (IGBT) is generally around 10kHz, resulting in a low carrier ratio (carrier frequency/operating frequency), even < 10 with significant control delay. This leads to severe inverter output voltage phase error, reducing the dynamic performance of the system. It also exacerbates dq-axis cross coupling, making standard current regulators ineffective. In general, low carrier ratio can degrade the performance and stability of the motor drive system. This paper investigates these issues with different design methods and current regulator configurations. The discrete-time domain HSPMSM model is developed that includes the delay effects associated with digital implementation and pulse width modulation (PWM). This model is then used to design a discrete-time domain deadbeat controller that demonstrates improved response compared with other regulators studied. Simulation and experimental results using a 380V, 14krpm HSPMSM and 9kHz switching frequency are provided to compare performance, stability, and robustness of the current regulators analyzed. It is demonstrated that the steady-state angle error is nearly zero and the error under high-speed transient dynamics is within 1°, showing good parameters robustness under ±30% stator inductance and ±50% stator resistance variations.

Closed-Loop Ramp-Comparison Current Regulator for an Induction Machine with a PWM Voltage-Source Inverter

Open-Loop Validation of a decoupled model of an Induction Motor Supplied by a PWM Inverter

Model Predictive Control of an Embedded Enhanced-Boost Z-Source Inverter

Optimized Current Regulator Design for Induction Motor Dynamic Performance Improvement in Over-Modulation Region

Comparison Analysis of Low‐switching‐frequency‐based IPMSM Sensorless Drives Considering Regulators, Observer and Inverter Non‐linearity

An I/f Control Method With Closed-loop Regulation of Current Vector for Surface Permanent Magnet Synchronous Motor Drives

SVPWM-based predictive current controller for four-quadrant induction motor drive system

A Comparison of Discrete-Time Complex Vector Current Regulators at Low Frequency Ratio

Direct Torque Control System For Induction Motors With Fuzzy Speed Pi Regulator

Design Oriented Analysis of Discrete-Time Current Regulator Design for Low Carrier Ratio Sensorless High-Speed Permanent Magnet Synchronous Machine Drives

Effective generalized predictive control of induction motor

Indirect Self Control Algorithm for Induction Motors Without PI/P Regulators

Variable Structure Approaches for Current Control in Vector Controlled Inverter-Induction Motor System.

Speed Control of SEPIC Converter-Based Induction Motor Drive System

A novel induction machine design suitable for inverter-driven variable speed systems

Comparison of Various Modulation Techniques for a Symmetrical Nine-Level Cascaded H-Bridge Multilevel Inverter Fed Induction Motor Drive

Closed-Loop Dynamic Control for Dual-Stator Winding Induction Generator at Low Carrier Ratio With Selective Harmonic Elimination Pulsewidth Modulation

Strategy and Implementation for Design and Analysis of Induction Machines Supplied by Power Electronic Inverters.

Induction Motor Improved Vector Control Using Predictive and Model-Free Algorithms Together with Homotopy-Based Feedback Linearization

Speed Adaptive Voltage Closed-Loop Field-Weakening Control for Induction Motor Drives

Double Closed-loop PWM Rectifier Based on Internal Model Control