Abstract:In the fields of wind power generation, ship shaft power generation, pipeline residual pressure power generation and flywheel energy storage, generators are needed to realize the conversion of mechanical energy to electrical energy. The difference between the dual stator-winding induction generator (DWIG) in this paper and the traditional induction generator studied is that the stator side is composed of two sets of windings, the power winding and the control winding, and the magnetic field of the motor rotor can be adjusted by the control winding, so as to keep the voltage and frequency of the output terminal of the power winding unchanged when the motor speed or load is changed by external influences. In this paper, the mathematical model of DWIG is established, the coupling relationship between the power winding, the control winding and the rotor winding is analyzed, and the mathematical model equation under the two-phase rotation dq coordinate system is derived. Secondly, a double closed-loop vector control strategy of power winding voltage outer loop and control winding current inner loop is proposed to maintain the stability of power winding terminal voltage and frequency by controlling the change of three-phase voltage of control winding. Finally, a simulation analysis model is built by using Simulink, and the closed-loop control performance under the condition of speed and load change is compared and analyzed, and the feasibility of the double closed-loop vector control strategy is verified.

Closed-Loop Dynamic Control for Dual-Stator Winding Induction Generator at Low Carrier Ratio With Selective Harmonic Elimination Pulsewidth Modulation

Optimized design of resonant controller for stator current harmonic compensation in DFIG wind turbine systems

Decoupled Vector Control Scheme for Dual-Armature Flux-Switching Permanent Magnet Machines

Dual Closed-Loop Control Strategy on Harmonic Plane for Multiphase Induction Motor with Harmonic Injection Based on Air-Gap Flux Orientation Control

Stator Current Harmonic Control with Resonant Controller for Doubly Fed Induction Generator

A Double Closed-loop Vector Control Strategy for Dual Stator-Winding Induction Generator

Dynamic-Decoupled Current Control Based on Reduced-Order Observer for Dual Stator-Winding Induction Generator

Stator Voltage Oriented Variable-parameter Control Strategy for Wind Turbine Driven Doubly Fed Induction Generator

Linear Active Disturbance Rejection Control for Dual-Stator Winding Induction Generator AC Power System

Low-Complexity Model Predictive Stator Current Control of DFIG under Harmonic Grid Voltages

Stator Harmonic Current Suppression Strategy for Doubly-fed Wind Power Generation System Influenced by Low-order Harmonic Voltage of Grid

Control of Five-Phase Dual Stator-Winding Induction Generator with an Open Phase

A Control Strategy for Doubly-fed Induction Generator Wind Turbines under Asymmetrical Grid Voltage Conditions Caused by Faults

Direct Power Control for Dfig under Unbalanced and Harmonically Distorted Grid Voltage in Stationary Frame

Sinusoidal Current Operation of a DFIG-DC System Without Stator Voltage Sensors

Dual Stator Windings PMSG Fed by Half-Controlled Converters for Wind Power Application

Direct Power Control of DFIG System Without Phase-Locked Loop under Unbalanced and Harmonically Distorted Voltage

Improved control strategy of DFIG-based wind power generation systems connected to a harmonically polluted network

Coordinated control strategy of DFIG for balanced currents and constant torque during grid voltage unbalance

Repetitive Control of the Stator-Side Four-Leg Converter in Stand-Alone Dfig-Based Wind Energy Conversion System

Improved Vector Control of Brushless Doubly Fed Induction Generator under Unbalanced Grid Conditions for Offshore Wind Power Generation