Abstract:The decreasing feature sizes in complementary metal-oxide semiconductor (CMOS) transistor technology will require the replacement of SiO2 with gate dielectrics that have a high dielectric constant (high-k) because as the SiO2 gate thickness is reduced below 1.4 nm, electron tunnelling effects and high leakage currents occur in SiO2, which present serious obstacles to future device reliability. In recent years significant progress has been made on the screening and selection of high-k gate dielectrics, understanding their physical properties, and their integration into CMOS technology. Now the family of hafnium oxide-based materials has emerged as the leading candidate for high-k gate dielectrics due to their excellent physical properties. It is also realized that the high-k oxides must be implemented in conjunction with metal gate electrodes to get sufficient potential for CMOS continue scaling. In the advanced nanoscale Si-based CMOS devices, the composition and thickness of interfacial layers in the gate stacks determine the critical performance of devices. Therefore, detailed atomicscale understandings of the microstructures and interfacial structures built in the advanced CMOS gate stacks, are highly required. In this paper, several high-resolution electron, ion, and photon-based techniques currently used to characterize the high-k gate dielectrics and interfaces at atomic-scale, are reviewed. Particularly, we critically review the research progress on the characterization of interface behavior and structural evolution in the high-k gate dielectrics by high-resolution transmission electron microscopy (HRTEM) and the related techniques based on scanning transmission electron microscopy (STEM), including high-angle annular darkfield (HAADF) imaging (also known as Z-contrast imaging), electron energy-loss spectroscopy (EELS), and energy dispersive X-ray spectroscopy (EDS), due to that HRTEM and STEM have become essential metrology tools for characterizing the dielectric gate stacks in the present and future generations of CMOS devices. In Section 1 of this review, the working principles of each technique are briefly introduced and their key features are outlined. In Section 2, microstructural characterizations of high-k gate dielectrics at atomic-scale by electron microscopy are critically reviewed by citing some recent results reported on high-k gate dielectrics. In Section 3, metal gate electrodes and the interfacial structures between high-k dielectrics and metal gates are discussed. The electron beam damage effects in high-k gate stacks are also evaluated, and their origins and prevention are described in Section 4. Finally, we end this review with personal perspectives towards the future challenges of atomic-scale material characterization in advanced CMOS gate stacks.

Contact holes in vertical electrode structures analyzed by voltage contrast-SEM and conducting AFM

Nano-mapping of vertical contact electrodes using synchrotron scanning photoelectron microscopy

Electro-Thermo-Mechanical Investigation On Multi-Level Interconnects In The Presence Of An Esd Pulse

Understanding the Impact of Surface Engineering, Structure, and Design on Electromigration Through Monte Carlo Simulation and In‐Situ SEM Studies

MOEMS 3D microstructure preparation method based on novel localized electrochemical deposition

Investigating metal oxide resists for patterning 28-nm pitch structures using single exposure extreme ultraviolet: defectivity, electrical test, and voltage contrast study

Contact Engineering for Two-Dimensional Semiconductors

Reducing the Aspect Ratio of Contact Holes by In-Situ Low-Angle Cross Sectioning

Establishing Ohmic Contact of a Radial Compressed CNT Bundle with High Work Function Metal

In situ via Contact to hBN-Encapsulated Air-Sensitive Atomically Thin Semiconductors

Low Contact Resistance on Monolayer MoS2 Field-Effect Transistors Achieved by CMOS-Compatible Metal Contacts

On the Limits of Scalpel AFM for the 3D Electrical Characterization of Nanomaterials

Direct Opto-Electronic Imaging of 2D Semiconductor - 3D Metal Buried Interfaces

A universal resist-assisted metal transfer method for 2D semiconductor contacts

Simultaneous Nanomechanical and Electrochemical Mapping: Combining Peak Force Tapping Atomic Force Microscopy with Scanning Electrochemical Microscopy

Characterization of high-k gate dielectrics by atomic-resolution electron microscopy: current progress and future prospects

Design and Application of a Metal Wet-Etching Post-Process for the Improvement of CMOS-MEMS Capacitive Sensors

Contact Optimisation Strategy for Wafer-Scale Field-Effect Transistors Based on Two-Dimensional Semiconductors

Challenges in Atomic-Scale Characterization of High-k Dielectrics and Metal Gate Electrodes for Advanced CMOS Gate Stacks

Alternative Voltage-Contrast Inspection for Pmos Leakage Due to Adjacent Nmos Contact-to-poly Misalignment

Enhanced Interlayer Charge Injection Efficiency in 2D Multilayer ReS2 via Vertical Double-Side Contacts