Abstract:Decreasing the number of cables that bring heat into the cryostat is a critical issue for all cryoelectronic devices. Especially, arrays of superconducting nanowire single-photon detectors (SNSPDs) could require more than $10^6$ readout lines. Performing signal processing operations at low temperatures could be a solution. Nanocryotrons, superconducting nanowire three-terminal devices, are good candidates for integrating sensing and electronics on the same technological platform as SNSPDs in photon-counting applications. In this work, we demonstrated that it is possible to read out, process, encode, and store the output of SNSPDs using exclusively superconducting nanowires. In particular, we present the design and development of a nanocryotron ripple counter that detects input voltage spikes and converts the number of pulses to an $N$-digit value. The counting base can be tuned from 2 to higher values, enabling higher maximum counts without enlarging the circuit. As a proof-of-principle, we first experimentally demonstrated the building block of the counter, an integer-$N$ frequency divider with $N$ ranging from 2 to 5. Then, we demonstrated photon-counting operations at 405 nm and 1550 nm by coupling an SNSPD with a 2-digit nanocryotron counter partially integrated on-chip. The 2-digit counter could operate in either base 2 or base 3 with a bit error rate lower than $2 \times 10^{-4}$ and a count rate of $10^7\,$s$^{-1}$. We simulated circuit architectures for integrated readout of the counter state, and we evaluated the capabilities of reading out an SNSPD megapixel array that would collect up to $10^{12}$ counts per second. The results of this work, combined with our recent publications on a nanocryotron shift register and logic gates, pave the way for the development of nanocryotron processors, from which multiple superconducting platforms may benefit.

Design and Performance of Parallel-channel Nanocryotrons in Magnetic Fields

Multilayered Heater Nanocryotron: A Superconducting-Nanowire-Based Thermal Switch

Characterizing and modeling the influence of geometry on the performance of superconducting nanowire cryotrons

Characterize the Switching Performance of a Superconducting Nanowire Cryotron for Reading Superconducting Nanowire Single Photon Detectors

A Superconducting Binary Encoder with Multigate Nanowire Cryotrons

Ginzburg–Landau simulations of three-terminal operation of a superconducting nanowire cryotron

Ginzburg-Landau simulations of three-terminal operation of a superconducting nanowire cryotron

Nanocryotron-driven Charge Configuration Memory

Monolithic integrated superconducting nanowire digital encoder

A nanoCryotron comparator can connect single-flux quantum circuits to conventional electronics

An On-Chip Vacuum Triode Based on Thermionic Electron Emission from Super-Aligned Carbon Nanotube Films

Electrostatic Engineering of Nanotube Transistors for Improved Performance

Nanocryotron ripple counter integrated with a superconducting nanowire single-photon detector for megapixel arrays

A Compact Superconducting Nanowire Memory Element Operated by Nanowire Cryotrons

Long nanomechanical resonators with circular cross-section

Dual-pace Transient Heat Conduction in Vertically Aligned Carbon Nanotube Arrays Induced by Structure Separation

High-frequency performance in nanoscale vacuum channel transistors with gate-cathode height difference

Cryogenic Reconfigurable Logic with Superconducting Heater Cryotron: Enhancing Area Efficiency and Enabling Camouflaged Processors

From Nuclotron Synchrotron to NICA Collider– Common Cryogenic Concept for Various Superconducting Magnets, their Design Specifics and Test Results

Band-pass superlattice magnetic tunnel junctions

Extracting the current-phase-relation of a monolithic three-dimensional nano-constriction using a DC-current-tunable superconducting microwave cavity