Abstract:With the development of 5G technology, the accurate measurement of the complex permittivity of a printed circuit board (PCB) in the wide frequency range is crucial for the design of high-frequency circuits. In this paper, a microwave measurement device and method based on the double-sided parallel-strip line (DSPSL) resonator have been developed to measure the complex permittivity of typical PCBs in the vertical direction. The device includes the DSPSL resonator, the DSPSL coupling probe, a pressure monitor, a Farran C4209 vector network analyzer (100 K to 9 GHz), and a FEV-10-PR-0006 frequency multiplier (75–110 GHz). Based on transmission line theory, the physical model of the DSPSL resonator was established, and the relative permittivity and loss angle tangent value of the dielectric substrate were calculated using conformal transformation. To excite the resonator, the DSPSL coupling probe with a good transmission effect was designed, which consists of DSPSL microstrip line (MSL) transition structure and an MSL-WR10 rectangular waveguide converter. To reduce the air gap between the sample and the metal guide band and dielectric support block, and to improve test accuracy, a mechanical pressure device is added to the top of the DSPSL resonator. Based on the DSPSL resonator, we have used the device to test four typical PCBs, namely, polytetrafluoroethylene, Rogers RT/duroid®5880, Rogers RO3006®, and Rogers RO3010®. The results show that the maximum error of the relative permittivity is less than 3.05%, and the maximum error of the loss angle tangent is less than 1.27 × 10−4.

Estimation of the FR4 Microwave Dielectric Properties at Cryogenic Temperature for Quantum-Chip-Interface PCBs Design

Estimation of the FR4 Microwave Dielectric Properties at Cryogenic Temperature for Quantum-Chip-Interface PCBs Design

Characterizing the attenuation of coaxial and rectangular microwave-frequency waveguides at cryogenic temperatures

Microwave characterisation of CaF2 at cryogenic temperatures using a dielectric resonator technique

Dielectric waveguide setup tested with a superconducting millimeter-wave Fabry-Pérot interferometer at milli-Kelvin temperatures

Advancements in FR4 dielectric analysis: Free space approach and measurement validation

Efficient system for bulk characterization of cryogenic CMOS components

A 3.5K 4-6 GHz RF-DAC for Cryogenic Quantum Applications in 28-Nm Bulk CMOS

Permittivity measurement of high-frequency substrate based on the double-sided parallel-strip line resonator method

Method for Efficient Large-Scale Cryogenic Characterization of CMOS Technologies

Measuring Dielectric Properties and Surface Resistance of Microwave PCBs in the K-band

Fabry-Pérot open resonant cavities for measuring the dielectric parameters of mm-wave optical materials

Complex Permittivity Characterization of Low-Loss Dielectric Slabs at Sub-THz

Cryogenic Characterization of Commercial Devices for Application of Quantum Computing Electronics.

Influence of the PCB Manufacturing Process on the Measurement Error of Planar Relative Permittivity Sensors Up To 100 GHz

Characterizing dielectric properties of ultra-thin films using superconducting coplanar microwave resonators

Non-volatile Tuning of Cryogenic Optical Resonators

Cryogenic electro-optic interconnect for superconducting devices

Cryogenic Photonic Readout Based on Thin-Film Lithium Niobate Mach–Zehnder Modulators

Cryogenic Optical-to-Microwave Conversion Using Si Photonic Integrated Circuit Ge Photodiodes