Abstract:This paper presents a bias modulation method for the force-to-rebalanced (FTR) micro hemispherical resonator gyroscope ($mu $ HRG) based on the mode-rotation, which is achieved by regulating the gyroscope’s drive and sense modes revolving at an assigned rate. The $mu $ HRG output under the mode-rotation includes the sinusoidally modulated bias and a rotation-induced DC bias. Accordingly, the alternating mode-rotation is proposed to chop the DC rate bias into square waves. By this approach, errors in the DC component from the scale factor drift are also modulated. The open-loop and closed-loop relationships between the rotation actuating force and the mode-rotation rate are investigated by theoretical analyses and numerical simulations. The lower and upper bounds of the rotation rate and the alternating frequency are discussed under the considerations of the error changing rate, the forcer capacity, the maximum voltage, the resonator momentum, and the measurement range. In addition, the controllers in the amplitude, quadrature, and inclination loops utilize the proportional-integral-resonance (PIR) regulating law to suppress the sinusoidal-varying errors introduced by the assigned rotation. The proposed bias modulation method was experimentally verified by a $mu $ HRG with an FPGA platform. The results suggest the alternating mode-rotation improved the bias temperature coefficient by 12 times over the rotation-free FTR architecture. For a three-hour measurement at room temperature, the rate-integration of the mode alternately rotated FTR was within 50 degrees. In comparison, the rate-integration of the rotation-free FTR diverged over 600 degrees due to the bias drift. The presented bias modulation method can be utilized in axisymmetric gyroscopes, such as hemispherical, ring/disk, quad-mass gyroscopes, etc.

A general approach to improve the bias stability of NMR gyroscope

A Sub-0.1°/H Bias-Instability MEMS Gyroscope Using Resonant Constant-Frequency Driving Technique

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

Identification and Suppression of Driving Force Misalignment Angle for a MEMS Gyroscope Using Parametric Excitation

Improving Long-Term Stability of a Resonant Micro-Optic Gyro by Reducing Polarization Fluctuation

Stability improvement of nuclear magnetic resonance gyroscope with self-calibrating parametric magnetometer

Mems Gyroscope Bias Drift Self-Calibration Based On Noise-Suppressed Mode Reversal

Attitude and Gyro Bias Estimation by the Rotation of an Inertial Measurement Unit

Bias Modulation of Force-to-Rebalanced Micro Hemispherical Resonator Gyroscope Based on Mode-Rotation

Gyroscope bias estimation and compensation by rotation of the inertial measurement unit

Improving the Performance of Broadband Source-Driven Resonant Fiber-Optic Gyroscopes

A Gyro-Aided Strapdown Triaxial Magnetometer Calibration Method Robust to Gyro Bias

Online Gyro Bias Estimation from Single Vector Measurements Using Regression Models

Estimation of Gyroscope Biases in MEMS IMU Based on Differential AR Modeling Testing on Synthetic and Real Data

Analysis and Compensation of Bias Drift for a Micromachined Spinning-rotor Gyroscope with Electrostatic Suspension.

Improving thermal stability of a closed-loop resonant fiber-optic gyroscope using a double demodulation technique

Consideration of Thermo-Vacuum Stability of a MEMS Gyroscope for Space Applications

Polarization Non-Reciprocity Error Suppression in Dual-Polarization Fiber Optic Gyroscopes

A New Type of Rotating Modulation SINS

Effective Bias Warm-Up Time Reduction for MEMS Gyroscopes Based on Active Suppression of the Coupling Stiffness