Abstract:Decades ago, the losses of glasses in the near infrared (near-IR) were investigated in views of developments for optical telecommunications. Today, properties in the mid-infrared (mid-IR) are of interest for molecular spectroscopy applications. In particular, high-sensitivity spectroscopic techniques based on high-finesse mid-IR cavities hold high promise for medical applications. Due to exceptional purity and low losses, whispering gallery mode microresonators based on polished alkaline earth metal fluoride crystals (i.e the $\mathrm{XF_2}$ family, where X $=$ Ca, Mg, Ba, Sr,...) have attained ultra-high quality (Q) factor resonances (Q$>$10$^{8}$) in the near-IR and visible spectral ranges. Here we report for the first time ultra-high Q factors in the mid-IR using crystalline microresonators. Using an uncoated chalcogenide (ChG) tapered fiber, light from a continuous wave quantum cascade laser (QCL) is efficiently coupled to several crystalline microresonators at 4.4 $\mu$m wavelength. We measure the optical Q factor of fluoride crystals in the mid-IR using cavity ringdown technique. We observe that $\mathrm{MgF_2}$ microresonators feature quality factors that are very close to the fundamental absorption limit, as caused by the crystal's multiphonon absorption (Q$\sim$10$^{7}$), in contrast to near-IR measurements far away from these fundamental limits. Due to lower multiphonon absorption in $\mathrm{BaF_2}$ and $\mathrm{SrF_2}$, we show that ultra-high quality factors of Q $\geqslant$ 1.4 $\times 10^{8}$ can be reached at 4.4 $\mu$m. This corresponds to an optical finesse of $\mathcal{F}>$4$\cdot$ 10$^{4}$, the highest value achieved for any type of mid-IR resonator to date, and a more than 10-fold improvement over the state-of-the-art. Such compact ultra-high Q crystalline microresonators provide a route for narrow linewidth frequency-stabilized QCL or mid-IR Kerr comb generation.

Ultra-high Q alumina optical microresonators in the UV and blue bands

Ultra-high-Q UV microring resonators based on single-crystalline AlN platform

Broadband Highly Efficient Nonlinear Optical Processes in On-Chip Integrated Lithium Niobate Microdisk Resonators of Q-factor above 108

Low-loss integrated photonics for the blue and ultraviolet regime

Ultra-high-Q Microcavities Fabricated on Fused Silica Chips by Three-Dimensional Femtosecond Laser Microfabrication

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

Ultrahigh quality-factor microresonators fabricated in pristine lithium niobate thin film for efficient nonlinear optics applications

Femtosecond Laser Direct Writing of High-Q Microresonators in Glass and Crystals

Ultrahigh-Q AlGaAs-on-insulator Microresonators for Integrated Nonlinear Photonics.

High Q micro-ring resonators fabricated from polycrystalline aluminum nitride films for near infrared and visible photonics

Integrated Ultra-High-Q Optical Resonator

Demonstration of Green and UV Wavelength High Q Aluminum Nitride on Sapphire Microring Resonators Integrated with Microheaters

CMOS-fabricated ultraviolet light modulators using low-loss alumina piezo-optomechanical photonic circuits

Alumina coating for dispersion management in ultra-high Q microresonators

OH absorption in on-chip high-Q resonators

Ultrahigh-Q crystalline microresonator fabrication with only precision machining

Mid-Infrared ultra-high-Q resonators based on fluoride crystalline materials

Demonstration of Ultra-High-Q Silicon Microring Resonators for Nonlinear Integrated Photonics

HfO$_2$-based platform for high-index-contrast visible/UV integrated photonics

Greater Than One Billion Q Factor for On-Chip Microresonators

Dry-etched Ultrahigh-Q Silica Microdisk Resonators on a Silicon Chip