Abstract:The European Spallation Source (ESS) accelerator is composed of superconducting elliptical cavities. When the facility is running, the cavities are fed with electrical field from klystrons. Parameters of this field are monitored and controlled by the Low-Level Radio Frequency (LLRF) system. Its main goal is to keep the amplitude and phase at a given set-point. The LLRF system is also responsible for the reference clock distribution. During machine operation the cavities are periodically experiencing strain caused by the Lorentz force, appearing when the beam is passing through the accelerating structures. Even small changes of the physical dimensions of the cavity cause a shift of its resonance frequency. This phenomenon, called detuning, causes significant power losses. It is actively compensated by the LLRF control system, which can physically tune lengths of the accelerating cavities with stepper motors (slow, coarse grained control) and piezoelements (active compensation during operation state). The paper describes implementation and tests of the software supporting various aspects of the LLRF system and cavities management. The Piezo Driver management and monitoring tool is dedicated for piezo controller device. The LO Distribution application is responsible for configuration of the local oscillator. The Cavity Simulator tool was designed to provide access to properties of the hardware device, emulating behaviour of elliptical cavities. IPMI Manager software was implemented to monitor state of MicroTCA.4 crates, which are major part of the LLRF system architecture. All applications have been created using the Experimental Physics and Industrial Control System (EPICS) framework and built in ESS EPICS Environment (E3).

Performance Analysis of Spoke Resonators, Statistics from Cavity Fabrication to Cryomodule Testing

Cold Test Results of Pre-Production PIP-II SSR2 Cavities with High-Power Couplers in the Fermilab Spoke Test Cryostat

Impact of Solenoid Induced Residual Magnetic Fields on The Prototype SSR1 CM Performance

SRF programs towards High-Q/High-G cavities in IJCLab

Completion of Testing Series Double-spoke Cavity Cryomodules for ESS

Tests at 2K of the beta 0.35 spoke cryomodule prototype with the MTCA.4-based Low Level RF system prototype for the MYRRHA R&D

Final Design of the Production SSR1 Cryomodule for PIP-II Project at Fermilab

Superconducting RF cavity R&D for future accelerators

Industrial Fabrication of Medium-Beta SCRF Cavities for a High-Intensity Proton Linac

PIP-II SSR2 Cavities Fabrication and Processing Experience

High-Level Software Tools for LLRF System Dedicated to Elliptical Cavities Management of European Spallation Source Facility

Fabrication experience of the pre-production PIP-II SSR2 cavities at Fermilab

DESIGN OF A NEW HORIZONTAL TEST CRYOSTAT FOR SCRF CAVITIES AT THE UPPSALA UNIVERSITY

Improving Interface Physics Understanding in High-Frequency Cryogenic Normal Conducting Cavities

Cavity Simulator for European Spallation Source

First high gradient test results of a dressed 325 MHz superconducting single spoke resonator at Fermilab

Characterizing materials for superconducting radiofrequency applications-A comprehensive overview of the quadrupole resonator design and measurement capabilities

STATUS OF THE SUPERCONDUCTING PROTON LINAC (SPL) CRYO- MODULE

Coaxial multi-mode cavities for fundamental SRF research in an unprecedented parameter space

THE ESS SUPERCONDUCTING LINEAR ACCELERATOR

Performance of PIP-II High-beta 650 Cryomodule After Transatlantic Shipping