Abstract:A 499.8 MHz single-cell superconducting cavity has been proposed as the active third-harmonic cavity for the High Energy Photon Source (HEPS), a 6 GeV diffraction-limited synchrotron light source currently under construction in Beijing. Two 499.8 MHz cryomodules are required to provide a total of 3.5 MV of rf voltage and 400 kW of beam power. A mechanically enhanced cavity design, based on the original KEKB-type cavity, was developed to meet the specifications of HEPS. Three cryomodules have been assembled and subjected to horizontal tests. A comprehensive clean-assembly procedure was developed, resulting in excellent rf performance maintained from vertical tests to horizontal tests at cryogenic temperatures. The unloaded quality factors of all three modules exceeded 2.45×10 9 at 1.75 MV, significantly surpassing the design goal. No field emissions were observed throughout the tests. These are the highest-performing 500 MHz modules treated by buffered chemical polishing, also outperforming the average performance of their electropolished counterparts. Following dedicated analyses and multiple road tests, one cryomodule was successfully transported in its entirety from the test platform to the HEPS tunnel, with well-controlled accelerations on delicate components. Vacuum integrity and performance were well maintained. The module has been accelerating electron beams since August 2024 for the HEPS commissioning. This paper presents the design, fabrication, assembly, cryogenic tests, and transportation of the mechanically improved 499.8 MHz single-cell srf cryomodule.

Completion of Testing Series Double-spoke Cavity Cryomodules for ESS

Performance Analysis of Spoke Resonators, Statistics from Cavity Fabrication to Cryomodule Testing

The Control System of the Elliptical Cavity and Cryomodule Test Stand Demonstrator for ESS

DESIGN OF A NEW HORIZONTAL TEST CRYOSTAT FOR SCRF CAVITIES AT THE UPPSALA UNIVERSITY

Cold Test Results of Pre-Production PIP-II SSR2 Cavities with High-Power Couplers in the Fermilab Spoke Test Cryostat

Tests at 2K of the beta 0.35 spoke cryomodule prototype with the MTCA.4-based Low Level RF system prototype for the MYRRHA R&D

Final Design of the Production SSR1 Cryomodule for PIP-II Project at Fermilab

Performance of PIP-II High-beta 650 Cryomodule After Transatlantic Shipping

Fabrication and cold test result of frib beta=0.53 pre-production cryomodule*

Cavity Simulator for European Spallation Source

First cold test of a crab cavity at the GERSEMI cryostat for the HL-LHC project

Quench Performance of the First Pre-series AUP Cryo-assembly

First neutron data recorded at the V20 Test Instrument utilizing prototype chopper systems and beam monitors planned for ESS

Low Energy, High Flux, Uniform and Large Field Size Electron Beam Facility

Development and tests of the 499.8 MHz srf cryomodules for HEPS

PIP-II SSR2 Cavities Fabrication and Processing Experience

Operational Experience from LCLS-II Cryomodule Testing

High Q and high gradient performance of the first medium-temperature baking 1.3 GHz cryomodule

Development of the double spoke cavity prototype for CSNS-II

Design Parameters and Commissioning of Vertical Inserts Used for Testing the XFEL Superconducting Cavities