Abstract:Experimental parameters have direct influences on materials properties and therefore their applications. The effect of plasma power on the properties of cobalt oxide thin films, prepared using plasma-enhanced chemical vapor deposition technique, on stainless steel substrates have been addressed in this paper. The structural, morphological, and compositional properties of these films were investigated by means of X-ray diffraction (XRD), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS) technique. The XRD patterns demonstrated the growth of polycrystalline Co3O4 thin film with a cubic spinel structure such that the intensity of (511) and (311) peaks increase as the plasma power increases to 100 W. It is observed that crystallite size increases by increasing the plasma power and the maximum crystallite size is found to be 64.8 nm for 100 W. The AFM results illustrate that the surface roughness and grain size increase by increasing the plasma power, and the film deposited at lower plasma power has more uniform and smoother surface, mainly owing to the increase in surface diffusion that in turn causes the coalescence of the grains. The results of XPS spectra indicated the formation of Co3O4 thin films on stainless steel substrates and there were no other elements other than Co, O in the XPS spectra. Additionally, stereometric analysis and fractal dimension of the 3-D surface microtexture of the AFM micrographs were analyzed and the Kolmogorov–Smirnov test was used to assess the normal distribution of quantitative variables. The results of statistical analysis corroborated the experimental results and proved that the surface roughness increased upon an increase in plasma power. Moreover, the corrosion behavior and the surface morphology of the cobalt oxide thin films were investigated using the potentiodynamic method and scanning electron microscopy. The results of these analysis proved that as the plasma power increases the corrosion resistance improves against the H2SO4. The sample which deposited at 100 W plasma power has the minimum corrosion current and the corrosion resistance of steel substrate was improved by controlling the anodic reactions resulted from a protective Co3O4 thin film. These results are useful for building and designing stainless steel devices in corrosive environments.

Demonstration of the etching cobalt oxide grown on the stainless steel as a base metal surface using F2/He dielectric barrier discharge plasma in atmospheric pressure

Comparing Medium Pressure Dielectric Barrier Discharge (DBD) Plasmas and Classic Methods of Surface Cleaning/activation of Pure Mg for Biomedical Applications

An Energy Efficient Process for Degrading Perfluorooctanoic Acid (PFOA) Using Strip Fountain Dielectric Barrier Discharge Plasma

Degradation of Stains from Metal Surfaces Using a DBD Plasma Microreactor

Effect of Atmospheric Pressure Dielectric Barrier Discharge Air Plasma on Electrode Surface

Surface Diversifying and Deuterium Retention Characteristics of Doped Graphite with SiC Coating Exposed to Plasma Discharges in EAST Tokamak

Statistical, morphological, and corrosion behavior of PECVD derived cobalt oxide thin films

Investigation of electrode-driven hydrogen plasma method for in situ cleaning of tin-based contamination

Cytological Localization of Dengue-2 Antigens: an Immunological Study with Ultrastructural Correlation

One-Stage Method for Removing Dyes under the Action of Underwater Plasma and Ferrites of Cobalt, Nickel, and Titanium

Surface Chemistry of Thermal Dry Etching of Cobalt Thin Films Using Hexafluoroacetylacetone (hfacH)

Removal Characteristics of Ni-Ferrite Oxide Film Formed on the Stainless Steel Surface in Fiber Laser Decontamination

Effect of Pre-treatment on Roughness and Hydrophobicity of Electro-Etched Steel with Improved Corrosion Resistance

The capability of diffuse coplanar surface barrier plasma to effectively remove contaminants from surfaces of various materialsEffektive Entfernung von Verunreinigungen von Oberflächen verschiedener Materialien durch ein diffuses koplanares Oberflächenbarriereplasma

Discharge System with a Self-Heated Hollow Cathode and an Evaporating Anode in a Cusp Magnetic Field for Oxide Coatings Deposition

Volatile Organic Compounds (vocs) Removal in Non-Thermal Plasma Double Dielectric Barrier Discharge Reactor

Corrosion protection performance of silicon-based coatings on carbon steel in NaCl solution: a theoretical and experimental assessment of the effect of plasma-enhanced chemical vapor deposition pretreatment

Effect of High Voltage Electrode Material on Methanol Synthesis in a Pulsed Dielectric Barrier Discharge Plasma Reactor

Self-limiting Nitrogen/Hydrogen Plasma Radical Chemistry in Plasma-Enhanced Atomic Layer Deposition of Cobalt

Visualization of In Situ Oxidation Process Between Plasma and Liquid Phase in Two Dielectric Barrier Discharge Plasma Reactors Using Planar Laser Induced Fluorescence Technique

Damage-Free Removal of Residual Carbon in a Dielectric Barrier Discharge (DBD) Plasma for Carbothermal-Synthesized Materials