Abstract:Laser peen forming (LPF) is a purely mechanical forming method achieved through the use of laser energy to form complex shapes or to modify curvatures. It is flexible and independent of tool inaccuracies that result from wear and deflection. Its nonthermal process makes it possible to form without material degradation or even improve them by inducing compressive stress over the target surface. In the present study, a fully three-dimensional numerical model is developed to simulate the forming process of laser peen forming. The simulation procedure is composed of several steps mainly including the shock pressure prediction, the modal analysis, and the forming process calculation. System critical damping is introduced to prevent unnecessary long post-shock residual oscillations and to greatly decrease the solution time for simulation. The bending profiles and angles with different thicknesses are experimentally measured at different scanning lines and scanning velocities to understand the process and validate the numerical model. The calculated bending profiles and angles agree well with the trend of the measured results. But it is found that simulations with the Johnson-Cook model are more consistent, matching the experimental results for the thick sheet metal with a convex bending, while the elastic-perfectly-plastic model produces a better agreement even though with underestimated values for the thinner sheet metal with a concave bending. The reason for this phenomenon is discussed, combining the effects of strain rate and feature size. Both the simulation and the experiments show that a continuous decrease in bending angle from concave to convex is observed with increasing specimen thickness in general. Large bending distortion is easier to induce by generating a concave curvature with LPF, and the angle of bending distortion depends on the number of laser shocks. [DOI: 10.1115/1.4002585]

On the Laser Forming Process of 6061 Aluminium Alloy Sheets with Angular Segment Irradiating Scheme: A Numerical and Statistical Investigation

Experimental and numerical investigation on laser beam forming of steel sheets

Numerical And Experimental Investigation Of Deformation Field During Laser Forming Of Metal Sheet

On the Bending Angle of Aluminum-Copper Two-Layer Sheets in Laser Forming Process

Real-time monitoring of temperature gradients and bending mechanism in multi-scan laser forming process

Influence of laser beam process parameters on the bending ability of Ti-6Al-4V titanium alloy sheets

Experimental Investigation of Laser Induced Thermoforming of 5A06 Aluminum Alloy Sheet

Finite element analysis of AM30 magnesium alloy sheet in the laser bending process

Recent Advances in the Laser Forming Process: A Review

Studies on Laser Forming of Ti–6Al–4V Alloy Sheet

Bending Forming Characteristics of CoCrFeMnNi High-Entropy Alloy Sheets Induced by Nanosecond Pulse Laser Irradiation

Three-Dimensional Numerical Study on Temperature Field of Laser Bending of Sheet Metal

Experimental Research on Pulse Laser Forming of Metal Sheet

Exploring the machining characteristics of aluminum 6061 using nanosecond pulse fiber laser machine

Experimental Study on Circular Overhang Circularity and Surface Quality in AlSi10Mg Manufactured by Laser Powder Bed Fusion

Experimental Investigation on the Bending Deformation of thin 1060 Pure Aluminum Sheet by Laser Peen Forming

STUDY ON LASER BENDING OF TITANIUM ALLOYS SHEETS

Three-dimensional numerical simulation and experimental study of sheet metal bending by laser peen forming

Dynamic Analysis on Laser Forming of Square Metal Sheet to Spherical Dome

Bending Angle Estimated Based On Inherent Strain Theory During Laser Forming

Design and Optimization of the Local Laser Treatment to Improve the Formability of Age Hardenable Aluminium Alloys