Abstract:To enhance the conductivity of a silver nanowire (Ag NW) network, a facile solvent welding method was developed. Soaking a Ag NW network in ethylene glycol (EG) or alcohol for less than 15 min decreased the resistance about 70%. Further combined solvent processing via a plasmonic welding approach decreased the resistance about 85%. This was achieved by simply exposing the EG-soaked Ag NW network to a low-power blue light (60 mW/cm2). Research results suggest that poly(vinylpyrrolidone) (PVP) dissolution by solvent brings nanowires into closer contact, and this reduced gap distance between nanowires enhances the plasmonic welding effect, hence further decreasing resistance. Aside from this dual combination of methods, a triple combination with Joule heating welding induced by applying a current to the Ag NW network decreased the resistance about 96%. Although conductivity was significantly enhanced, our results showed that the melting at Ag NW junctions was relatively negligible, which indicates that the enhancement in conductivity could be attributed to the removal of PVP layers. Moreover, the approaches were quite gentle so any potential damage to Ag NWs or polymer substrates by overheating (e.g., excessive Joule heating) was avoided entirely, making the approaches suitable for application in devices using heat-sensitive materials.

What problem does this paper attempt to address?

The main focus of this paper is to improve the conductivity of silver nanowire (Ag NW) networks. Researchers have developed a simple solvent welding method that can reduce the resistance of Ag NW networks by approximately 70% within 15 minutes by immersing them in ethylene glycol (EG) or alcohol. By combining plasma welding technology, the resistance can be further reduced by approximately 85%. This effect is achieved by irradiating the Ag NW network soaked in EG with low-power blue light. It was found that solvent dissolution of PVP (polyvinylpyrrolidone) tightens the contact between nanowires, reduces the gap between them, enhances the plasma welding effect, and thus reduces the resistance. In addition, a triple combination method is proposed, which involves the application of current-induced Joule heating welding to achieve a reduction in resistance of approximately 96%. The paper points out that although Ag NW networks have excellent flexibility, conductivity, and optical transmittance, their resistance mainly depends on the resistance at the junctions of Ag NW, which is much greater than the resistance of Ag NW itself. Various post-processing methods have been developed to remove residual PVP and ensure metal-to-metal contact in order to improve conductivity. However, existing thermal welding methods may damage heat-sensitive polymer substrates. The paper proposes several welding methods to avoid overheating, including brief high-intensity ion beam irradiation and high-power laser welding. However, these methods require expensive equipment and have limited welding efficiency. Light-induced plasma welding utilizes localized high temperature generated by local surface plasmon resonance, but it requires high-intensity light sources of specific wavelengths. Current-assisted localized joule heating welding uses current to weld Ag NW, but precise control of the current is required to prevent overheating and damage to the Ag NW network. The new methods introduced in the paper include simple immersion treatment, which involves adding EG or alcohol to the Ag NW network and effectively improving the overall conductivity of the network. The combination of solvent and plasma welding further enhances the conductivity. In addition, a current strategy is utilized for Joule heating welding. These methods have been thoroughly studied in terms of reducing material resistance and affecting the structure of nanowire junctions, providing mild and effective welding strategies for practical applications, especially for devices that use heat-sensitive materials.

Solvent Welding-Based Methods Gently and Effectively Enhance the Conductivity of a Silver Nanowire Network

Conductivity Enhancement of Silver Nanowire Networks Via Simple Electrolyte Solution Treatment and Solvent Washing

Substrateless Welding of Self-Assembled Silver Nanowires at Air/Water Interface

Electrochemical Redox In-Situ Welding of Silver Nanowire Films with High Transparency and Conductivity

Unraveling the Solvent Induced Welding of Silver Nanowires for High Performance Flexible Transparent Electrodes.

Direct Room Temperature Welding and Chemical Protection of Silver Nanowire Thin Films for High Performance Transparent Conductors

Halide Welding for Silver Nanowire Network Electrode

Photothermal‐Induced Nanowelding of Metal–Semiconductor Heterojunction in Integrated Nanowire Units

Plasmon-enhanced Nanosoldering of Silver Nanoparticles for High-Conductive Nanowires Electrodes

Fast Welding of Silver Nanowires for Flexible Transparent Conductive Film by Spatial Light Modulated Femtosecond Laser

Study of Microwave-Induced Ag Nanowire Welding for Soft Electrode Conductivity Enhancement

Preparation and Cold Welding of Silver Nanowire Based Transparent Electrodes with Optical Transmittances >90% and Sheet Resistances <10 Ohm/sq.

Cohesively Enhanced Electrical Conductivity and Thermal Stability of Silver Nanowire Networks by Nickel Ion Bridge Joining

Spontaneous and Selective Nanowelding of Silver Nanowires by Electrochemical Ostwald Ripening and High Electrostatic Potential at the Junctions for High-Performance Stretchable Transparent Electrodes

Welded silver nanowire networks as high-performance transparent conductive electrodes: Welding techniques and device applications

Femtosecond laser nanowelding of silver nanowires for transparent conductive electrodes

Laser-induced Single Point Nanowelding of Silver Nanowires

Enhancement Of The Conductivity And Uniformity Of Silver Nanowire Flexible Transparent Conductive Films By Femtosecond Laser-Induced Nanowelding

Improvement of the Conductivity of Silver Nanowire Film by Adding Silver Nano-Particles

Efficient Welding of Silver Nanowires embedded in a Poly(vinylidene fluoride) Film for Robust Wearable Electronics

Synthesis of ultra-long silver nanowires and the joining of silver networks