Abstract:Because of its extreme hardness, wear resistance, good thermal conductivity and low thermal expansion coefficients, a diamond tool exhibits a range of properties which makes it a key and unique component in many fields of mechanical engineering. In comparison with the other types of diamond tools, the thin film diamond-coated cutting inserts have great potentialities in the commercial application because of its low costs for fabrication equipment and high performance. Thus, they are on the verge of becoming the next generation of tools used for high speed machining non-ferrous metals and alloys, metal-compound materials, and hard brittle non-metals. However, the poor adhesion of the diamond film on the substrate becomes the main technical barriers for the successful development and commercialization of diamond-coated tools. In this paper, diamond thin films were deposited on WC-Co cemented carbide substrates by the electron aided hot filament chemical vapor deposition (EACVD), using a mixture of hydrogen and acetone as source gases. A new multiple chemical pre-treatment including microwave oxidation, reaction in alkaline solution and cleaning by ultrasonic treatment in acid solution has been performed for free shape cemented WC-Co drills in order to increase the diamond nucleation and to enhance the coating adhesion. And also, another new pretreatment method using Ar-HZ gas etching decarburization by microwave plasma is performed for the WC-Co substrate surface. The influences of this pretreatment technique on the adhesion strength, diamond nucleation and surface morphology of the diamond thin film are investigated. Scanning electron microscope (SEM) was used to view the substrate morphology, and to examine the cobalt removal. After pre-treatment, the surface of the WC-Co substrate becomes slightly rough, but its composition and structure shows no changes identified by X-ray diffraction (XRD). Scanning electron microscope (SEM) indicates a distribution of uniform micro-roughness WC grains on substrate surface. And also the research results show that the pretreatment using Ar-H etching decarburization by microwave plasma is an effective method to enhance adhesive strength. The appropriate CVD processes were studied for the fabrication of tools with complex geometries. An adequate amount of additive can effectively prevent the overflow of Co from inner to surface of the substrate and avoid the catalytic effect of Co during CVD. The smooth diamond film with low surface roughness can be deposited by increasing the carbon source concentration and reducing the reactive pressure at the later stage of CVD process. The diamond morphology quality and homogeneity of coatings were characterized by SEM and Raman spectroscopy. The cutting performances of diamond-coated tools were studied by the cutting tests of difficult-to-machine materials. The research results show that the high quality diamond coating has been deposited on complex shape substrates for WC-Co cemented carbide twist drills. The cutting performances of diamond-coated drills are improved further by the new pretreatment and CVD process. It is of great significance for the fabrication and application of the diamond-coated tools with complex geometries.

Molecular simulation and curing-forming of ultraviolet/thermal-sensitive resin diamond composites for microstructured polishing tool

Preparation Technology and Properties of Microtexture Diamond-Coated Tools

An Experimental Study on the Precision Abrasive Machining Process of Hard and Brittle Materials with Ultraviolet-Resin Bond Diamond Abrasive Tools

Fabrication of polycrystalline diamond micro-milling cutter with different grain sizes by picosecond laser

Effect of Mechanical Pretreatment on Nucleation and Growth of HFCVD Diamond Films on Cemented Carbide Tools with a Complex Shape

Study on Preparation and Processing Properties of Mechano-Chemical Micro-Grinding Tools

Micro-grooving of brittle materials using textured diamond grinding wheels shaped by an integrated nanosecond laser system

High-strength and wear-resistant Co-Cr-Mo/diamond composites fabricated by selective laser melting

Preparation of the rod-shaped SiO2@C abrasive and effects of its microstructure on the polishing of zirconia ceramics

Vitrified Metal Composite Bond for Diamond Grinding Tools Used for Silicon Carbide Wafer Thinning

Polymer coated γ-aminopropyltriethoxysilane-modified α-alumina non-spherical nanocomposite abrasives and their chemical mechanical polishing behavior on glass-ceramic substrate

Additive manufacturing of Al2O3 coated diamond-resin composites via digital light processing

Precision Grinding of a Microstructured Surface on Hard and Brittle Materials by a Microstructured Coarse-Grained Diamond Grinding Wheel

Optical Quality Laser Polishing of CVD Diamond by UV Pulsed Laser Irradiation

Study on the Optimization of Deposition Processing Technology of Diamond Coated Tools

Preparation and Application of Photocuring Resin

A New Multiple Chemical Pretreatment For Fabrication Of High Quality Cvd Diamond-Coated Drills

Ultrasonic-Assisted Innovative Polyurethane Tool to Polish Mold Steel

Preparation and Cutting Performance of Ultra-Smooth CVD Composite Diamond Coated Ladder-Shape Drilling Tools

Laser Micro Machining Of Micro-Structures On Cvd Diamond

The fabrication of polycrystalline diamond micro drill based on ultrashort pulsed laser