Abstract:The asymmetry of heat conduction in thermal diodes is attributed to the thermal regulation in thermal logic circuits, thermal control devices, etc. Currently, thermal rectification devices, however, are constrained by either specific on/off switching thresholds, or low sensitivity to manufacturing errors, as well as the restrictions for specific roughness and material characteristics. Here, a thermal diode based on fractal structures (inverted tapered branch channel, 5.7 mm branch length, and 4 branches) with liquid metal/insulator interface is proposed to avoid these existing constraints. The thermal rectification coefficient reaches 0.4704 (16.43 times larger than that of the basic structures) when the filling fraction only increases 1.33 times. The maximum temperature difference for the optimized thermal diodes is 18.31 °C when the heating temperature is 80 °C. By different arrangements of two thermal diodes mounted on chambers’ surfaces, the interior temperatures range from 16.06 to 52.34 °C in the same ambient conditions (23.49 °C), indicating the excellent thermal regulation effect of the thermal diodes. These controlled temperature chambers can be applied in greenhouses or cold chain storage devices, more combinations with higher degree of thermal‐threshold tunability offer possibilities in solving complicated thermal management problems and promote the energy utilization efficiency. The thermal diode based on fractal structures with liquid metal/insulator interface is proposed to realize asymmetric heat conduction (rectification coefficient is 0.4704). By different arrangements of two thermal diodes mounted on chambers’ surfaces, the interior temperatures range from 16.06 to 52.34 °C in same ambient conditions. These controlled temperature chambers applied in greenhouses or cold‐chain storage can promote the energy utilization efficiency.

Thermal diode assisted by geometry under cycling temperature

Nonlinear Transformation Thermotics: from Switchable Thermal Cloaks to Macro Thermal Diodes

FEA for Steady-State Thermal Performance of PCR Thermal-Cycler Based on Thermoelectric Cooler

Self-adaptive Passive Temperature Management for Silicon Chips Based on Near-Field Thermal Radiation

Design of thermal diodes using asymmetric thermal deformation of a Kirigami structure

An efficient thermal diode with ballistic spacer

Thermo-Mechanical Simulation of Self-Heating of a High-Power Diode Made of Ti3SiC2 (MAX) Phase-on-4H-SiC Substrate

Unidirectional heat and fluid transfer performances of thermal diode with fishbone-microstructure wicks

Thermal Rectification in CVD Diamond Membranes Driven by Gradient Grain Structure

Supercooling-enabled giant and tunable thermal rectification ratio of a phase change thermal diode

Thermal Diodes Based on Fractal Structures with Tunable Thermal Threshold

Thermal Management of Micro-Scale Inorganic Light-Emittng Diodes on an Orthotropic Substrate for Biointegrated Applications

Thermal rectification mechanism of composite cylinders with temperature and stress-dependent interface thermal resistance

Asymmetric Heat Transfer with Linear Conductive Metamaterials

Temperature-Gated Thermal Rectifier for Active Heat Flow Control

Thin-Film Radiative Thermal Diode with Large Rectification

Dual Phase Change Thermal Diodes with High Rectification for Thermal Management near Room Temperature

Thermal Analysis of a Novel Compact Packaged Passively Cooled Laser Diode Array

Electromagnetically controlled multiferroic thermal diode

Thermal cycling characterization of an integrated low-inductance GaN eHEMT power module

Experimental Measurement of Thermal Conductivities in a Thin Heterogeneous Structure of Thermal Diodes