Abstract:For many applications of pulsed radiation, the time-history of the radiation intensity must be optimized to induce a desired time-history of conditions. This optimization is normally performed using multi-physics simulations of the system. The pulse shape is parametrized, and multiple simulations are performed in which the parameters are adjusted until the desired response is induced. These simulations are often computationally intensive, and the optimization by iteration of parameters in forward simulations is then expensive and slow. In many cases, the desired response can be expressed such that an instantaneous difference between the actual and desired response can be calculated. In principle, a computer program used to perform the forward simulation could be modified to adjust the instantaneous radiation drive automaticaly until the desired instantaneous response is achieved. Unfortunately, such modifications may be impracticable in a complicated multi-physics program. However, the computational time increment in such simulations is generally much shorter than the time scale of changes in the desired response. It is much more practicable to adjust the radiation source so that the response tends toward the desired value at later times. This relaxed in-situ optimization method can give an adequate design for a pulse shape in a single forward simulation, giving a typical gain in computational efficiency of tens to thousands. This approach was demonstrated for the design of laser pulse shapes to induce ramp loading to high pressure in target assemblies incorporating ablators of significantly different mechanical impedance than the sample, requiring complicated pulse shaping.

Laser Pulse Duration Optimization With Numerical Methods

Numerical Simulations on a Nanosecond-Pulse Exciplex Pumped Cesium Vapor Laser

Nonlinearity Optimization of Dissipative-Soliton Fiber Laser for Generation of Pulses with 350 Kw Peak Power

Online optimization and measurement of femtosecond laser pulse in multi-petawatt laser facility

Optimization of the ionization time of an atom with tailored laser pulses: a theoretical study

Optimized computation of tight focusing of short pulses using mapping to periodic space

Pareto Optimization of a Laser Wakefield Accelerator

Optimization Of Single Attosecond X-Ray Pulses By Genetic Algorithm Control Of The Chirp And Initial Phase Of 5 Fs Laser Pulses

Genetic algorithm optimization of broadband operation in a noise-like pulse fiber laser

Numerical optimization of quantum vacuum signals

Computationally efficient optimization of radiation drives

Design, Optimization, and Blackbox Optimization of Laser Systems

Ultra-Short Pulse Lasers for Microfabrication: A Review

Optimization of low-power femtosecond laser trepan drilling by machine learning and a high-throughput multi-objective genetic algorithm

Pareto Optimization and Tuning of a Laser Wakefield Accelerator

Optimization of Passively Q-switched Nd:YAG/Cr:YAG Microchip Lasers and Experiments

Field Stabilization of Pulse Duration in a Hundredfemtosecond Level

Toward machine-learning-assisted PW-class high-repetition-rate experiments with solid targets

Design, Tuning, and Blackbox Optimization of Laser Systems

Optimization of laser pumping for the generation of multi-pulse structures in fiber lasers

GENETIC ALGORITHM-BASED OPTIMIZATION OF THE LASER-BEAM PATH IN ADDITIVE MANUFACTURING