Abstract:Continuous fiber laser with ultra-high power and narrow linewidth is one of the key devices in the field of high-precision industrial processing, beam combining, and nonlinear frequency conversion. Under the premise of ensuring the signal quality, continuously increasing the output power is the focus of high-power narrow-linewidth fiber lasers. Driven by the white noise or pseudo-random binary sequence (PRBS), using cascaded phase modulations to broaden the spectrum of the seed source to suppress the stimulated Brillouin scattering (SBS) effect in the master oscillator power amplifier (MOPA) structure is an effective solution to increase the output power. However, this type of optical spectrum needs to be optimized, and the randomness of the driving signal causes a self-pulsing effect, which limits the further increase of the output power. In this paper, the influence of the frequency interval and randomness of the driving signal on the SBS effect in the laser system is analyzed. The modulated spectral type can be simply adjusted through changing the bit rate and inversion probability. Combining with high-order phase modulation, an approximate rectangular spectral broadening of the seed source with a tunable bandwidth up to 30 GHz is achieved. Compared with the cascaded white noise case, the output power of this scheme is increased by 600 W under the extended bandwidth of 27 GHz. It is fully verified that the seed source spectrum with high in-band flatness and low randomness can effectively suppress the SBS effect in the fiber laser and increase the output power.

Genetic algorithm optimization of broadband operation in a noise-like pulse fiber laser

Broadband Noise-Like Pulse Generation at 1 Μm Via Dispersion and Nonlinearity Management.

Nonlinearity Optimization of Dissipative-Soliton Fiber Laser for Generation of Pulses with 350 Kw Peak Power

Gain dynamics driven broadband Q-switched noise-like pulse in ultrafast fiber laser

Genetic Algorithm-Based Fast Real-Time Automatic Mode-Locked Fiber Laser

High-energy mode-locked fiber lasers using multiple transmission filters and a genetic algorithm.

Gain Characteristics and Optimization of Dual-Pump Fiber Optical Parametric Amplifier Using Two-Section Highly Nonlinear Fibers

Design of Fiber-Optical Parametric Amplifiers by Genetic Algorithm

Polarization control parameters evolution of genetic algorithm‐based 2 μm Tm‐doped fiber laser

High-power Narrow-Linewidth Fiber Lasers Using Optical Spectrum Broadening Based on High-Order Phase Modulation of Inversion Probability-Tuning Sequence.

Self-optimizing additive pulse mode-locked fiber laser: wavelength tuning and selective operation in continuous-wave or mode-locked regime

Optimization Of Single Attosecond X-Ray Pulses By Genetic Algorithm Control Of The Chirp And Initial Phase Of 5 Fs Laser Pulses

Nonlinear ultrafast fiber amplifiers beyond the gain-narrowing limit

Machine-learning Iterative Optimization for All Polarization-Maintaining Linear Cavity Er:fiber Laser.

Using Reverse Saturable Absorption to Boost Broadband Noise-Like Pulses

Investigation of noise-like pulse evolution in normal dispersion fiber lasers mode-locked by nonlinear polarization rotation

Pulsating dynamics of noise-like pulses in a fiber laser with nonlinear optical loop mirror

Tailored supercontinuum generation using genetic algorithmoptimized Fourier domain pulse shaping

Optimization of a sealed-off CO2 laser resonator by utilizing a genetic algorithm

Compact Broadband Light Source Based on Noise-Like Pulses

Sub-kHz high-order mode Brillouin random fiber laser based on long-period fiber grating and distributed Rayleigh scattering in a half-open linear cavity