Abstract:The process of melt electrospinning has received noteworthy attention due to its ability to fabricate micro scaled polymer fibers. Recently, a melt electrospinning process has been attracting attention for biomedical applications, in particular with scaffold fabrication for tissue engineering. In order to enhance cell attachment and proliferation on scaffolds, it is important to control fiber diameters to create an environment to which cells can attach, grow, and proliferate with ease. However, because electrospinning is a process with many parameters, it is particularly difficult to precisely control the diameter of the resulting fibers. Also, polymer powders or pellets melted in nozzles are typically used for melt electrospinning. However, a filament feeding melt electrospinning process has not been yet been implemented. In this study, we developed a melt electrospinning device which can feed PCL (Polycaprolactone, Mw: 80 000 g mol−1) filaments for advanced electrospun fiber diameter control. The PCL filaments were first fabricated by a small scale micro-compounder and then fed into the melting chamber of the electrospinning device. The system was then heated to a desired temperature, and the melt was extruded through a nozzle. The potential difference between the nozzle and counter electrode then drew down the PCL extrudate, creating fine microfibers. Temperature was controlled and monitored via a customized temperature control system. In order to control the dispensing of the PCL filaments, a customized control algorithm using NI (National Instruments) LabVIEW was used. In order to actively cool PCL filaments, a miniature computer fan was attached on the side of the melting chamber so that the filaments would not buckle. This paper reveals the investigation of significant process parameters that influence fiber diameters and their optimization. For instance, applied voltages, distances between the nozzle and a counter electrode, processing temperatures, and polymer resin flowrates were varied. We also studied and summarized the effect of duty cycle—a ratio of forward and backward motions of the filament within a cycle time—for advanced fiber diameter control. Moreover, the relationship between a flow rate and a duty cycle and their influences on a fiber diameter were studied.

Direct writing by way of melt electrospinning

Continuous Micron-Scaled Rope Engineering Using a Rotating Multi-Nozzle Electrospinning Emitter

Laser Direct Writing Using Submicron-Diameter Fibers.

Direct-Write, Self-Aligned Electrospinning on Paper for Controllable Fabrication of Three-Dimensional Structures.

Direct Writing of Submicron Lines Using the Micro-and Nanofiber Pens

The Next Frontier in Melt Electrospinning: Taming the Jet

Melt Electrospinning Writing of Three-dimensional Poly(ε-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications

Fabrication of Heterogeneous Scaffolds Using Melt Electrospinning Writing: Design and Optimization

Design and fabrication of tubular scaffolds via direct writing in a melt electrospinning mode

Investigation of the effects of melt electrospinning parameters on the direct-writing fiber size using orthogonal design

Near-Field Electrospinning and Melt Electrowriting of Biomedical Polymers—Progress and Limitations

Experimental Research on Thermo-Direct Fiber Drawing Technique

Dimension-Based Design of Melt Electrowritten Scaffolds

Electrospinning: a fascinating method for the preparation of ultrathin fibers.

Processing variables of direct-write, near-field electrospinning impact size and morphology of gelatin fibers

Design and manufacture of an additive manufacturing printer based on 3D melt electrospinning writing of polymer

Dual-Electrode Melt Differential Electrospinning

Fabricating and controlling PCL electrospun microfibers using filament feeding melt electrospinning technique

Electrospinning for Depositing Orderly Nanofiber Patterns

Dual rotation centrifugal electrospinning: a novel approach to engineer multi-directional and layered fiber composite matrices

Melt Electrospinning Writing of Highly Ordered Large Volume Scaffold Architectures