Abstract:The process of melt electrospinning has received noteworthy attention due to its ability to fabricate micro scaled polymer fibers. Recently, a melt electrospinning process has been attracting attention for biomedical applications, in particular with scaffold fabrication for tissue engineering. In order to enhance cell attachment and proliferation on scaffolds, it is important to control fiber diameters to create an environment to which cells can attach, grow, and proliferate with ease. However, because electrospinning is a process with many parameters, it is particularly difficult to precisely control the diameter of the resulting fibers. Also, polymer powders or pellets melted in nozzles are typically used for melt electrospinning. However, a filament feeding melt electrospinning process has not been yet been implemented. In this study, we developed a melt electrospinning device which can feed PCL (Polycaprolactone, Mw: 80 000 g mol−1) filaments for advanced electrospun fiber diameter control. The PCL filaments were first fabricated by a small scale micro-compounder and then fed into the melting chamber of the electrospinning device. The system was then heated to a desired temperature, and the melt was extruded through a nozzle. The potential difference between the nozzle and counter electrode then drew down the PCL extrudate, creating fine microfibers. Temperature was controlled and monitored via a customized temperature control system. In order to control the dispensing of the PCL filaments, a customized control algorithm using NI (National Instruments) LabVIEW was used. In order to actively cool PCL filaments, a miniature computer fan was attached on the side of the melting chamber so that the filaments would not buckle. This paper reveals the investigation of significant process parameters that influence fiber diameters and their optimization. For instance, applied voltages, distances between the nozzle and a counter electrode, processing temperatures, and polymer resin flowrates were varied. We also studied and summarized the effect of duty cycle—a ratio of forward and backward motions of the filament within a cycle time—for advanced fiber diameter control. Moreover, the relationship between a flow rate and a duty cycle and their influences on a fiber diameter were studied.

Melt Electrospinning Writing of Three-dimensional Poly(ε-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications

Precise Printing of Microfiber Scaffold with Gelatin Methacryloyl (gelma)/polyethylene Oxide (PEO) Bioink

Fabrication of Heterogeneous Scaffolds Using Melt Electrospinning Writing: Design and Optimization

Design and fabrication of tubular scaffolds via direct writing in a melt electrospinning mode

Recent advances in melt electro writing for tissue engineering for 3D printing of microporous scaffolds for tissue engineering

Melt Electrospinning Writing of Highly Ordered Large Volume Scaffold Architectures

Fabrication of poly (ϵ-caprolactone) microfiber scaffolds with varying topography and mechanical properties for stem cell-based tissue engineering applications

Numerical Model of Jet Formation During Melt Electrowriting for Fabrication of Precise Structures

Melt Electrowriting of Complex 3D Anatomically Relevant Scaffolds

Near-Field Electrospinning and Melt Electrowriting of Biomedical Polymers—Progress and Limitations

Unraveling hierarchically ordered melt electro-written tissue engineering scaffolds: Morphological and mechanical insights

Controlling Mechanical Properties of Medical-Grade Scaffolds through Electrospinning Parameter Selection

Dimension-Based Design of Melt Electrowritten Scaffolds

Design, fabrication, and analysis of spatially heterogeneous scaffold by melt electrospinning writing of poly(ε‐Caprolactone)

Melt electrospinning of biodegradable polyurethane scaffolds

Highly architectural MEW scaffolds with superior performance

Progress in the Field of Electrospinning for Tissue Engineering Applications

Patterned melt electrospun substrates for tissue engineering

The Challenge of E-Spinning Sub-Millimeter Tubular Scaffolds—A Design-of-Experiments Study for Fiber Yield Improvement

Fabricating and controlling PCL electrospun microfibers using filament feeding melt electrospinning technique