Thariq Shanavas,Michael Grayson,Bo Xu,Mo Zohrabi,Wounjhang Park,Juliet T. Gopinath
Abstract:We report the first observation of cascaded forward stimulated Brillouin scattering in a microresonator platform. We have demonstrated 25 orders of intramodal Stokes beams separated by a Brillouin shift of 34.5 MHz at a sub-milliwatt threshold at 1550 nm. An As$_2$S$_3$ microsphere of diameter 125 $\mu m$ with quality factor $1\times 10^6$ was used for this demonstration. Theoretical modeling is used to support our experimental observations of Brillouin shift and threshold power. We expect our work will advance the field of forward stimulated Brillouin scattering in integrated photonics with applications in gas sensing and photonic radio frequency sources.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to realize Cascaded Forward Stimulated Brillouin Scattering (CFSBS) on a micro - cavity platform. Specifically, by using a chalcogenide glass micro - sphere resonator, the researchers observed for the first time the cascaded forward - stimulated Brillouin scattering phenomenon of the 25 - order Stokes beam occurring within the same optical mode. The Brillouin frequency shift between these Stokes beams is 34.5 MHz, and the threshold power is only in the sub - milliwatt level (0.91 mW).
### Key technical points:
1. **Material selection**: An As₂S₃ micro - sphere resonator with a diameter of 125 μm and a quality factor of \(1\times10^6\) was used.
2. **Experimental setup**: A 1550 - nm narrow - linewidth tunable laser was connected to the micro - sphere resonator through a coupling fiber, and an RF spectrometer was used to detect the beat - frequency signal between the pump light and the Stokes light.
3. **Theoretical model**: The experimental results were verified by finite - element simulation, especially the theoretical prediction of the Brillouin frequency shift and the threshold power.
### Problems solved:
- **Low threshold**: Cascaded forward - stimulated Brillouin scattering was generated at a sub - milliwatt threshold, which has a lower threshold than traditional backward - stimulated Brillouin scattering (BSBS).
- **Cascading effect**: As many as 25 - order Stokes beams were demonstrated, with a frequency shift of 34.5 MHz between each beam, which provides new possibilities for high - sensitivity gas sensing and photonic frequency synthesis.
- **Phase matching**: By selecting an appropriate micro - sphere geometry, the phase - matching conditions of the optical pump, Stokes light, and phonon wave were satisfied, enabling forward - stimulated Brillouin scattering to occur.
### Application prospects:
- **Gas sensing**: By using the cumulative effect of cascaded Stokes beams, the sensitivity of Brillouin - scattering - based gas sensors can be improved.
- **Photonic frequency synthesis**: Realizing cascaded forward - stimulated Brillouin scattering on a chip can be used to generate low - noise radio - frequency signals, thus promoting the development of photonic frequency synthesizers.
### Formula explanation:
- **Brillouin gain**:
\[
\Gamma=\frac{2\omega Q_m}{\Omega^2}\frac{\nu_{gp}\nu_{gs}|\langle f, u_m\rangle|^2}{\langle E_p,\epsilon E_p\rangle\langle E_s,\epsilon E_s\rangle\langle u_m,\rho u_m\rangle}
\]
where \(\omega\) is the frequency of the light wave, \(\Omega\) is the frequency of the sound wave or the Brillouin frequency shift, \(\nu_{gp}\) and \(\nu_{gs}\) are the group velocities of the pump light and the Stokes light respectively, \(\epsilon\) is the dielectric constant of the material, \(\rho\) is the density, \(E_p\) and \(E_s\) are the unnormalized electric fields of the pump light and the Stokes light respectively, and \(u_m\) is the unnormalized acoustic - wave displacement vector, and \(f\) is the net force generated by electrostriction and radiation pressure.
- **Stokes power under small - signal approximation**:
\[
P_{out}^s = \left|\frac{|\tau|-G}{1 - |\tau|G}\right|^2P_{in}^s
\]
where \(\tau\) is the coupling constant, \(G\) is the single - pass envelope gain, defined as:
\[
G=\exp\left[-\frac{\alpha L}{2}+\frac{\Gamma}{2\alpha}P_{in}^p(1 - e^{-\alpha L})\right]
\]
where \(P_{in}^p\) is the input pump power, \(\alpha\) is the total loss, and \(L\) is the cavity length.
Through these techniques and theoretical models, the researchers...