Abstract:Metallic mirror is the core component of the imaging system in the reflective astronomical telescope.However,because the telescopes are usually located in the wild,they are often contaminated by dust and other pollutants which will greatly reduce the imaging quality.Therefore,the surface of reflective mirror in telescope should be cleaned routinely in order to recover high performance of telescope.Currently,the artificial ice cleaning is the most common method employed in the cleaning of mirror surface,which is complicated and costly.Besides,the micron particles adhered on the surface of the mirror are especially difficult to be removed by dry ice flow when their diameters are less than 20 μtm because of the Van der Waals' force between the particles and metal mirror.Moreover,an ordinary method with wipe and cleanser is also used in which the friction between wipe and mirror may damage the telescope.To overcome these shortcomings,this work proposed a laser cleaning strategy in which amplified femtosecond pulsed lasers was used to clean the reflecting mirror surface.As a new cleaning method,laser cleaning technology which is non-contact and frictionless has been applied successfully in the cleaning of industrial molds,buildings,precision machinery components.For the advantages of femtosecond laser,such as short pulse duration,small thermal effects,high pulse energy,it has been used in the cleaning of cultural relics and has good achievement in recent years.This article firstly studied the interaction between the femtosecond laser and the reflective aluminum mirror.The laser damage threshold of aluminum mirror was measured about 60 mJ/cm2,which would reduce to 57 mJ/cm2 for dirty mirror because of the microparticles adhered on the surface of reflector mirror.Then,by optimizing laser parameters including the scan rate,the scan pitch,and the laser energy,it could be found that when the laser energy density ranges from 30 to 55 mJ/cm2,micron dust particles with diameters less than 20 μm on mirror surface could be cleaned with excellent clean effect and the reflectivity in the visible light region has been greatly improved.Finally,through the dust particles and aluminum mirror substrate spectrum analysis,we ruled out that the removed microparticles were thermal melted by laser energy.The results indicated that thermal expansion plays the key role in laser cleaning of metal mirror.This work shows that femtosecond laser cleaning has a good effect on the removing of micron particles.As a simple and easy way,femtosecond laser cleaning has a good prospect in cleaning of astronomical telescope.

Elimination of surface/subsurface defects on additively manufactured AlSi10Mg mirrors through nano-second laser irradiation

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Research for surface characteristics of aluminum mirrors made by laser additive manufacturing

Anti-reflection Coating at 550 Nm Fabricated by Atomic Layer Deposition

Design, Fabrication and Characterization of Dispersive Mirrors for Ultrafast Lasers

Design and fabrication of additively manufactured aluminum mirrors

Design and Fabrication of an Additively Manufactured Aluminum Mirror with Compound Surfaces

High-precision processing method for an aluminum mirror assisted with a femtosecond laser

Precision manufacturing of metal mirrors based on additive manufacturing

Anisotropy reduction of additively manufactured AlSi10Mg for metal mirrors

Sub-Nanometer Accuracy Combination Processing Technology for Nickel–Phosphorus Modified Surfaces Based on Aluminum Reflector Mirror

Precision manufacturing of a lightweight mirror body made by selective laser melting

Design and fabrication of lightweight additively manufactured mirrors for aviation

Unique cellular microstructure-enabled hybrid additive and subtractive manufacturing of aluminium alloy mirror with high strength

High precision polishing of aluminum alloy mirrors through a combination of magnetorheological finishing and chemical mechanical polishing

Design, additive manufacturing, processing, and characterization of metal mirror made of aluminum silicon alloy for space applications

Fabrication Strategy of Additively Manufactured Metal Mirror Based on Multi-Load Topology Optimization and Single-Point Diamond Turning

Improvement of the optical properties after surface error correction of aluminium mirror surfaces

Metal-dielectric dispersive mirrors for ultraviolet lasers

Femtosecond Laser Cleaning the Surface of Reflective Mirror in Telescope