Abstract:Spaced-based mirrors are a developing use-case for Additive Manufacturing (AM), the process that builds a part layer-by-layer. The increased geometric freedom results in novel and advantageous designs previously unachievable. Conventionally, mirror fabrication uses subtractive (milling & turning), formative (casting) and fabricative (bonding) manufacturing methods; however, an additive method can simplify an assembly by consolidating individual components into one, and incorporating lattice structures and function optimised geometries to reduce the mass of components, which are beneficial to space-based instrumentation as mass and volume are constrained. Attention must be given to the printability of the design - build orientation and powder/resin removal from lattices and internal cavities are challenges when designing for AM. This paper will describe the design, manufacture and metrology of mirror prototypes from the Active Deployable Optical Telescope (ADOT) 6U CubeSat project. The AM mirror is 52mm in diameter, 10mm deep, with a convex 100mm radius of curvature reflective surface and deploys telescopically on three booms. The objectives of the designs were to combine the boom mounting features into the mirror and to lightweight both prototypes by 50% and 70% using internal, thin-walled lattices. Four final lattice designs were downselected through simulation and prototype validation. Prototypes were printed in the aluminium alloy AlSi10Mg using powder bed fusion and fused silica using stereolithography. Aluminium mirrors were single point diamond turned and had surface roughness measurements taken. Fused silica designs were adapted from the aluminium designs and have completed printing.

Design and fabrication of lightweight additively manufactured mirrors for aviation

Design and fabrication of additively manufactured aluminum mirrors

Precision manufacturing of a lightweight mirror body made by selective laser melting

Design and Fabrication of Extremely Lightweight Truss-Structured Metal Mirrors

Design and Fabrication of an Additively Manufactured Aluminum Mirror with Compound Surfaces

Precision manufacturing of metal mirrors based on additive manufacturing

Design, manufacture and metrology of additively manufactured, metal and ceramic lightweight circular mirror prototypes

Machining Process of Lightweight AlSi10Mg Optical Mirror Based on Additive Manufacturing Substrate

Anisotropy reduction of additively manufactured AlSi10Mg for metal mirrors

Fabrication Strategy of Additively Manufactured Metal Mirror Based on Multi-Load Topology Optimization and Single-Point Diamond Turning

Investigating Mass Reduction Capabilities of Additive Manufacturing through the Re-Design of a Space-Based Mirror

Research for surface characteristics of aluminum mirrors made by laser additive manufacturing

Optomechanical Performances of Advanced Lightweight Mirrors Based on Additive Manufacturing

Additive manufacturing of metal mirrors for TMA telescope

Fabrication of a lightweight Al alloy mirror through 3D printing and replication methods

Design and Fabrication Technology of Metal Mirrors Based on Additive Manufacturing: A Review

Design, additive manufacturing, processing, and characterization of metal mirror made of aluminum silicon alloy for space applications

Design Optimization Method for Additive Manufacturing of the Primary Mirror of a Large-Aperture Space Telescope

The Optimization Design of a Lightweight 2 m SiC Mirror for Ground-Based Telescopes

A Review of Lightweight Design for Space Mirror Core Structure: Tradition and Future