Abstract:The orbital fracture regeneration and reconstruction is still a catastrophic challenge due to the extremely thin anatomical structure and different defect shapes in various clinical conditions. The conventional bio-materials and preparation technique are often inefficient in satisfying porous scaffold architecture designs with respect to their required structural stability and biological performances. Here we developed the ultrathin scaffolds with high-precision pore structure and appreciable osteogenic activity for orbital bone repair via digital light processing (DLP) stereolithography. The dilute magnesium-substituting wollastonite (CSi-Mg) bioceramic scaffolds of similar to 1.5 mm in thickness and over 60% in porosity were investigated systematically, and compared with another calcium-magnesium silicate (i.e. akermanite) and the pure wollastonite porous counterparts. The results showed that the flexural strengths (similar to 6-22 MPa) and in vitro biodegradation of such bioceramic scaffolds could be tuned during their chemical composition (i.e. Mg content) design stage, and the CSi-Mg scaffolds were also beneficial for osteogenic cell activity in vitro. In particular, the CSi-Mg scaffolds could readily enhance the new bone ingrowth at 4 weeks of implantation in a critical-sized rabbit orbital bone defect model, and such strength-strong scaffolds exhibited outstanding orbital defect repair efficacy after 12 weeks of implantation, in comparison with the structural instability of other scaffolds. Basically, it is demonstrated that the dilute magnesium doping in wollastonite bioceramic can be favorable for developing the mechanically reliable scaffolds with high porosity and bioactivity but quite thin wall morphology, and meanwhile the DLP-assisted additive manufacturing help us to optimize such porous bioceramic design with respect to their required structural stability for orbital bone reconstruction. (C) 2020 Published by Elsevier Ltd.

Core-shell-typed selective-area ion doping wollastonite bioceramic fibers enhancing bone regeneration and repair in situ

Effect of Foreign Ion Substitution and Micropore Tuning in Robocasting Single-Phase Bioceramic Scaffolds on the Physicochemical Property and Vascularization

Core-Shell Bioactive Ceramic Robocasting: Tuning Component Distribution Beneficial for Highly Efficient Alveolar Bone Regeneration and Repair.

3D Printing Novel Porous Granule-Type Bioceramics Via Magnesium Tuning Biological Performances Beneficial for Implantation and Clinical Translation

Core-shell-structured Nonstoichiometric Bioceramic Spheres for Improving Osteogenic Capability

Selective ion doping core-shell bioceramic fiber-derived granules readily tuning biodegradation and initiating osteoporotic bone defect repair

Biphasic ceramic biomaterials with tunable spatiotemporal evolution for highly efficient alveolar bone repair

3D Printed Long-Term Structurally Stable Bioceramic Dome Scaffolds with Controllable Biodegradation Favorable for Guided Bone Regeneration

3D Printed High-Strength Bioceramic Dome Scaffolds with Controllable Biodegradation for Guided Bone Regeneration

Direct Ink Writing Core-Shell Wollastonite@Diopside Scaffolds with Tailorable Shell Micropores Favorable for Optimizing Physicochemical and Biodegradation Properties

Nonstoichiometric wollastonite bioceramic scaffolds with core-shell pore struts and adjustable mechanical and biodegradable properties

Simultaneous Mechanical Property and Biodegradation Improvement of Wollastonite Bioceramic Through Magnesium Dilute Doping

3D Printing Magnesium-Doped Wollastonite/β-Tcp Bioceramics Scaffolds with High Strength and Adjustable Degradation

Composition control in biphasic silicate microspheres on stimulating new bone regeneration and repair of osteoporotic femoral bone defect

Ultrahigh Strength of Three-Dimensional Printed Diluted Magnesium Doping Wollastonite Porous Scaffolds

3D robocasting magnesium-doped wollastonite/TCP bioceramic scaffolds with improved bone regeneration capacity in critical sized calvarial defects

Tuning filament composition and microstructure of 3D-printed bioceramic scaffolds facilitate bone defect regeneration and repair

Core-Shell Biphasic Microspheres with Tunable Density of Shell Micropores Providing Tailorable Bone Regeneration.

Digital Light Processing Strength-Strong Ultra-Thin Bioceramic Scaffolds for Challengeable Orbital Bone Regeneration and Repair in Situ

Yolk-porous Shell Biphasic Bioceramic Granules Enhancing Bone Regeneration and Repair Beyond Homogenous Hybrid.

Dual-core-component multiphasic bioceramic granules with selective-area porous structures facilitating bone tissue regeneration and repair