Abstract:Material response and the launch of laser plasma during the 1064 nm nanosecond laser pulse induced damage to the exit surface of fused silica are investigated. Employing a polarization-based two-frame shadowgraphy setup with ～ 60 fs probing resolution, the transient material responses from the rising part of nanosecond pumping pulse to several hundred nanosecond timescale are captured. Using a shearing interferometry setup, the evolution of transient phase shift of laser plasma in the expansion process to the ambient air is also investigated. Inhomogeneous distribution of phase shift caused by the electrons and neutrals in the plasma is quantitatively resolved by employing the fast Fourier transform based filtering algorism. To demonstrate the evolutions of important plasma parameters such as pressure, temperature and density, a continuum hydrodynamic model is numerically solved. The initial pressure of plasma is estimated according to the point-explosion model, and the initial plasma temperature is achieved by calculating the difference between simulating shockwave front radius and experimental value at the same delay. The optimal temperature is chosen when the radius difference is minimal. Main conclusions are as follows. 1) Abundant suprathermal electrons are excited in the early energy deposition process. Part of these electrons contribute to the thermal transport process and produce the laser supported solid-state absorption front (LSSAF) which propagates into the bulk silica. Other electrons escape to the air side and contribute to the formation of air plasma through the impact ionization process. Plasma expansion speed is about 20 km/s during this phase. 2) When the pump pulse is terminated, the LSSAF and air plasma lose their energy supplied and experience a rapid decline of the temperature and expansion velocity. As a result, the final damage crater depth exhibits seldomly no increase compared with the transient crater depth during this phase. Hot bulk plasma formed in this phase becomes the damage precursor and induces the ejection of abundant neutrals probably due to the phase explosion mechanism. Inhomogeneous distribution of stress is formed by Rayleigh-Taylor instability at the interface between hot bulk plasma and surrounding bulk material during the expansion of LSSAF. Radial and circumferential cracks are formed due to the release of stress. 3) Evolution of air plasma follows the conventional evolution process of laser-induced plasma, i. e. , internal pressure, temperature and density decrease quickly with time delay. The simulated transient highest pressure is about 600 MPa. Simulation also predicts the formation of the internal shockwave. Our work will be helpful in understanding the laser damage mechanism of the fused silica optical window.

Experimental study and simulation of the damage induced to various multilayer interferential mirrors by soft x-ray plasma-laser sources

Damage threshold measurements on EUV optics using focused radiation from a table-top laser produced plasma source

Investigation and modeling of optics damage in high-power laser systems caused by light backscattered in plasma at the target

Monte Carlo/molecular Dynamics Simulation on Melting and Evaporating Processes of Material Due to Laser Irradiation

Numerical and Experimental Study on Thermal Damage Induced by Medium-Infrared Laser

Ultrafast Laser Material Damage Simulation—A New Look at an Old Problem

Numerical simulation on the damage behaviors of optical mirrors induced by film defects in high-power CW laser

Dual-wavelength investigation of laser-induced damage in multilayer mirrors at 532 and 1064 nm

Fundamental Study of Wave Propagation on Liquid Surface Related IFE Mirror

Experimental and Computational Study of Damage Pocess Induced by 1064 Nm Nanosecond Laser Pulse on the Exit Surface of Fused Silica

Experiment and simulation of novel liquid crystal plasma mirrors for high contrast, intense laser pulses

Surface Degradation of Thin-Layer Al/MgF2 Mirrors under Exposure to Powerful VUV Radiation

Dynamics of Femtosecond Laser Pulse Induced Damage in Multilayers

Multi-shot Damage on Mo/Si Multilayer Induced by Nanosecond EUV Radiation

Study of Laser-Irradiated Thin Films

Investigation of damage induced by high-power continuous wave laser on SiC-based film

Multiple Wavelength Laser Induced Damage of Multilayer Beam Splitters

Damage Resistance of B 4 C Reflective Mirror Irradiated by X-ray Free-Electron Laser

Influence of nodular defects on the laser damage resistance of optical coatings in the femtosecond regime.

Time-domain dynamic electric field distribution of low-oscillation sculptured structure dispersive mirrors

Laser damage thresholds of ITER mirror materials and first results on in situ laser cleaning of stainless steel mirrors