Abstract:In the present work, the tribological mechanism of diamond-like carbon (DLC) films was investigated. DLC films were coated on metallic substrates (M50 steel, Ti-6Al-4V alloy and AISI 440C steel) by methane ion-beam deposition. Pin-on-disc experiments showed that the DLC films possess excellent wear resistance and exhibit low values of friction coefficient (ƒ < 0.1). The frictional response was characterized by an initial break-in period that was followed by an intermediate constant ƒ stage. The presence of a carbon transfer layer was observed on the wear scars of ball surfaces. Transmission electron microscopy and electron diffraction from the transfer layer showed that it contained a fine distribution of graphite nanoparticles (less than 5 nm) in a distorted diamond-like structure. Laser Raman spectra taken from the wear track region also revealed evidence of graphitization. In light of the present observations, the intermediate friction stage was mainly attributed to transfer layer formation. During long-duration wear experiments, a further reduction in ƒ was observed that finally reached steady state low friction (ƒ = 0.05–0.07) and an ultralow wear rate (about 1.6 × 10−9mm3 m−1 N−1). Steady state was related to the complete transformation of diamond-like to graphite-like carbon under thermal and strain effects from the repeated friction through a precursor stage involving hydrogen evolution and sp3 structure destabilization. The ultra-low wear rates were correlated to easy shear of low-strength atomic carbon interlayers in the graphitic structure.

Interaction between sputtered beta-Ta films and diamond-like carbon with Ru intermediate layer

Ruthenium Barrier/Seed Layer for Cu/Low-κ Metallization

Structure and mechanical properties of Ti alloyed DLC films

Magnetron Sputtering Preparation of Diamond-Like Carbon Film Adhesion Characteristics Research

Study of the metallization and interface reaction between diamond film and Ti layer by AES

Effects of TiMoTa nano-crystalline interlayer on nucleation, adhesion and tribological behaviors of diamond coating

Sputtered Ru–Ti, Ru–N and Ru–Ti–N Films As Cu Diffusion Barrier

Tribological Properties of Graded Diamond-Like Carbon Films on Ti Ion-Implanted Aluminum Substrate

A study of the wear mechanism of diamond-like carbon films

Influence of Heat-Treatment on Mechanical and Frictional Properties of DLC Films with and Without Ti Underlayer

Annealing Effect on Microstructure of Novel Ti Doped DLC Multilayer Films

The properties of Ru on Ta-based barriers

Preparation and Tribological Properties of DLC/Ti Film by Pulsed Laser Arc Deposition

Microstructure, Tribological and Cutting Performance of Ti-DLC/α-C:H Multilayer Film on Cemented Carbide

Structural Characters and Tribological Properties of Diamondlike Carbon Films

Effect of Ta diffusion layer on the adhesion properties of diamond coating on WC-Co substrate

Preparation, Characterization and Tribological Properties of Diamond-Like Carbon Film on AZ31 Magnesium Alloy

Influence of methane flow ratios on the structural and mechanical properties of Ti-doped diamond-like carbon films

Mechanical and Tribological Properties of Diamond-Like Carbon Films Deposited by Electron Cyclotron Resonance Microwave Plasma Chemical Vapor Deposition

Structural and electrical properties of tantalum nitride thin films fabricated by using reactive radio-frequency magnetron sputtering

The Interface Diffusion and Chemical Reaction Between a Ti Layer and a Diamond Substrate