Abstract:Programmable photonic integrated circuits (PICs) are the foundation of on-chip optical technologies with the optical modulators being one of the main building blocks of such programmable PICs. However, most of the available modulators suffer from high power consumption, low response time and large footprint. To overcome some limitations the nonvolatile phase change materials implemented in the plasmonic structures are proposed that can offer many advantages as a result of high electric field interaction with nonvolatile materials. Consequently, proposed here novel plasmonic nonvolatile switches can operate by phase modulation, absorption modulation, or both and under zero-static power. Thus, only 230 nm long active waveguide is needed to attain full pi phase delay with an insertion loss of 0.12 dB. Apart from it, when operating by amplitude modulation an extinction ration exceeding 2.2 dB/um can be achieved while an insertion loss is kept at 0.185 dB/um. Furthermore, the heating mechanism can be based on the external heaters, internal heaters, electrical (memory) switching or optical switching mechanism what provide a lot of flexibility in terms of a design and requirements.

What problem does this paper attempt to address?

The problems that this paper attempts to solve mainly focus on several key challenges existing in modulators and switches in current photonic integrated circuits (PICs). Specifically: 1. **High power consumption**: Most existing modulators and switches consume a large amount of electricity during operation. 2. **Low response speed**: The response time of these devices is long and cannot meet the requirements of high - speed applications. 3. **Large size**: Existing devices usually have a large size, which is not conducive to being integrated into compact systems. 4. **High insertion loss**: Many modulators and switches will generate high insertion loss during use, affecting the signal transmission efficiency. 5. **Volatility**: Existing modulators and switches will lose their states and stored information after power failure, that is, they are volatile. In order to overcome these problems, the paper proposes an ultra - compact plasmonic modulator and switch based on non - volatile phase - change materials (PCMs). This new - type device has the following advantages: - **Non - volatility**: Once the state is set, it can maintain this state without continuous power supply, thus achieving zero static power consumption. - **Low power consumption**: Through efficient thermal management and material selection, the working voltage and power consumption can be significantly reduced. - **Compact size**: By using the plasmonic structure, a full - π phase delay can be achieved in a very small space, for example, only an active waveguide 230 nanometers long is required. - **Low insertion loss**: In the phase - modulation mode, the insertion loss is only 0.12 dB; in the amplitude - modulation mode, the insertion loss per micrometer is 0.185 dB. - **Flexible design**: The phase change can be achieved through an external heater, an internal heater, an electrical (memory) switching or an optical switching mechanism, providing multiple design options. Through these improvements, the paper aims to develop a new - type modulator and switch suitable for fields such as high - performance computing, neuromorphic computing, photonic storage, LIDAR systems and efficient switching in data centers.

Ultra-compact nonvolatile plasmonic phase change modulators and switches with dual electrical-optical functionality

Nonvolatile plasmonics based on optically reprogrammable phase change materials

Design of an ultra-compact, energy-efficient non-volatile photonic switch based on phase change materials

All-optically Modulated Nonvolatile Optical Switching Based on a Graded-Index Multimode Fiber.

Electronically Reconfigurable Photonic Switches Incorporating Plasmonic Structures and Phase Change Materials

Non-volatile electrically programmable integrated photonics with a 5-bit operation

Plasmonic‐Enhanced Polymer‐Stabilized Liquid Crystals Switching for Integrated Optical Attenuation

Integrated non-volatile plasmonic switches based on phase-change-materials and their application to plasmonic logic circuits

Broadband nonvolatile electrically programmable silicon photonic switches

Waveguide-Integrated Plasmonic Photodetectors and Activation Function Units With Phase Change Materials

Non-volatile Polarization-Insensitive 1×2 Silicon Optical Switch Using Phase-Change Materials

Nonvolatile Electrically Reconfigurable Silicon Photonics Enabled by Back-End-of-line Integration of Phase Change Materials

Inverse Design and Numerical Investigations of an Ultra-Compact Integrated Optical Switch Based on Phase Change Material

Synchronous micromechanically resonant programmable photonic circuits

Ultra-compact plasmonic modulator for optical inteconnects

Plasmonically-enhanced all-optical integrated phase-change memory

All-Optical Phase-Change Memory with Improved Performance by Plasmonic Effect

A compact plasmonic MOS-based 2×2 electro-optic switch

Ultracompact High‐Extinction‐Ratio Nonvolatile On‐Chip Switches Based on Structured Phase Change Materials

Plasmonic Optical Modulator based on Adiabatic Coupled Waveguides

Ultrafast Chip-Integrated All-Optical Switch in Photonic Circuits