Abstract:Mixed metal vanadate oxide (NKVO) synthesized by hydrothermal followed by annealing was coated with an amorphous layer of V2O5 (NKVO@V2O5) by a wet-chemical method and annealed for prolong period. The amorphous state of V2O5 was suggested by X-ray diffraction predicted by the absence of a new peak of V2O5. To know the oxidation states of vanadium X-ray photon spectroscopy was carried out, to further understand the process of V2O5 deposition onto NKVO pre/post-annealing surface transmission electron microscopy was also carried out. The elemental distribution was demonstrated by Elemental dispersion spectrum. The prepared anode materials were subjected to cyclic galvanostatic charge-discharge, cyclic performance and cyclic voltammetry at multiple current rates to demonstrate the electrochemical performance. The coated NKVO@V2O5 anode material resulted in improved electrochemical performance when the anode was cycled at the current density of 3Ag(-1) with starting discharge capacity of 151.17 mAhg(-1) after 60 cycles reduced to 113.0 mAhg(-1) retaining 74.7% of initial capacity in the voltage window of -1 similar to 1V (vs SCE), in contrast, the pristine material showed only 58.5% capacity retention. The NKVO@V2O5 showed increased capacity retention i.e. 62.5, 69.8%, 80.5%, and 77.9% under current rate of 0.1Ag(-1), 0.5Ag(-1), 1Ag(-1), and 2Ag(-1) respectively, while the pristine NKVO could only retain 58.6%, 57.0%, 53.4%, and 61.4% after 60 cycles at respective current rates. The characterization methods and the results suggested that coating layer plays a key role in improving the electrochemical performance. As the V2O5 layer served as a barrier to protect from the occurrence of unwanted side reaction. However, the layer also prevented the dissolution of active material in aqueous electrolyte. Due to the high ionic conductivity of V2O5, it also promoted Li+ and electronic conductivity. The calculation of lithium ion diffusion coefficient of NKVO@V2O5 (1.07 x 10(-10), 3.96 x 10(-11) and 3.01 x 10(-12) cm(2) s(-1)) effectively suppresses that of pristine NKVO suggesting more electrode polarization during cycling. (C) 2019 Elsevier Ltd. All rights reserved.

Investigations on the improved cycling stability of Kazakhstanite phase Fe-V-O layered oxide by using superconcentrated electrolytes: Generalized solubility limit approach (Part I)

Cycling Stability of 5V LiMn1.5Ni0.5O4 Spinel Particles Coated with a Thin Film Mixed Conductor

Balancing the Redox Activity Against Structure Stability in High-Voltage Manganese/iron-Based Layered Oxide Cathodes Through Copper Doping for Potassium-Ion Batteries

Effect of salt concentration on the solubility, ion-dynamics, and transport properties of dissolved vanadium ions in lithium-ion battery electrolytes: Generalized solubility limit approach (Part II)

Synthesis and Structure Stabilization of Disordered Rock Salt Mn/V-Based Oxyfluorides As Cathode Materials for Li-Ion Batteries

Unraveling the Role of Surficial Oxygen Vacancies in Stabilizing Li‐Rich Layered Oxides

Structure Stabilization by Mixed Anions in Oxyfluoride Cathodes for High-Energy Lithium Batteries.

Strategies to alleviate distortive phase transformations in Li-ion intercalation reactions: an example with vanadium pentoxide

Uncovering the Fundamental Role of Interlayer Water in Charge Storage for Bilayered V2O5 · Nh2o Xerogel Cathode Materials

Phase Engineering via Aluminum Doping Enhances the Electrochemical Stability of Lithium‐Rich Cobalt‐Free Layered Oxides for Lithium‐Ion Batteries

Controllable oxygen vacancies (in surface and bulk) to suppress the voltage decay of Li-rich layered cathode

Excellent Cycling Stability and Capability of Novel Mixed-Metal Vanadate Coated with V2O5 Materials in an Aqueous Solution

Boosting zinc ion storage performance of sandwich-like V2O5/graphene composite by effectively inhibiting vanadium dissolution

Single-crystal Li-rich Layered Cathodes with Suppressed Voltage Decay by Double-Layer Interface Engineering

Electrolyte Optimization to Improve the High-Voltage Operation of Single-Crystal LiNi0.83Co0.11Mn0.06O2 in Lithium-Ion Batteries

Interface-reconstruction Forming Bifunctional (LixTM1-x)O Rock-salt Shell for Enhanced Cyclability in Li-rich Layered Oxide

Insights into the Enhanced Cycling Stability of Cobalt-Free Single-Crystal Layered Oxide Cathodes at Elevated Voltage

The Effect of Vanadium on Physicochemical and Electrochemical Performances of LiFePO[sub 4] Cathode for Lithium Battery

Structural Engineering of Hydrated Vanadium Oxide Cathode by K+ Incorporation for High-Capacity and Long-Cycling Aqueous Zinc Ion Batteries

Suppressing Vanadium Dissolution in "Water-in-Salt" Electrolytes for 3.2 V Aqueous Sodium-Ion Pseudocapacitors

Lattice Oxygen Redox Reversibility Modulation in Enhancing the Cycling Stability of Li‐Rich Cathode Materials