Abstract:The no-insulation (NI) winding technique is promising to be applied in the persistent-current mode (PCM) operation of high-temperature superconducting (HTS) coils to provide those advantages. To apply the NI PCM coil, its demagnetization behaviour (i.e., decay of persistent DC current) by external AC field, which occurs in maglev trains, electric machines, and other dynamic magnet systems, is essential to be understood. For this purpose, a 3D FEM model, capturing the full electromagnetic properties of NI HTS coils, is established. This work has studied three kinds of AC fields, observing the impact of turn-to-turn contact resistivity on demagnetization rates, which is attributed to current distribution modulations. Under transverse AC field, the lower contact resistivity attracts more transport current to flow in the radial pathway to bypass the 'dynamic resistance' generated in the superconductor, leading to slower demagnetization. Under axial AC field, the demagnetization rate exhibits a non-monotonic relation with the contact resistivity: (1) the initial decrease of contact resistivity leads to concentration of induced AC current on the outer turns, which accelerates the demagnetization; (2) the further decrease of contact resistivity makes the current smartly redistribute to avoid to flow through the loss-concentrated outer turns, thus slowing down the demagnetization. Under the rotating DC field, a hybrid of the transverse and axial fields, the impact of contact resistivity on the demagnetization rate exhibits combined characteristics of the transverse and axial components. Besides, quantitative prediction on the demagnetization rate of NI PCM coil under external AC field is instructive for practical designs and operations, which is tried by this 3D FEM model, and a comparison with experimental result is conducted.

AC losses in macroscopic thin-walled superconducting cylinders

Meissner state in finite superconducting cylinders with uniform applied magnetic field

AC Magnetic Susceptibility: Mathematical Modeling and Experimental Realization on Poly-Crystalline and Single-Crystalline High-Tc Superconductors YBa2Cu3O7−δ and Bi2−xPbxSr2Ca2Cu3O10+y

Pseudogap and superconducting phase fluctuations in high-Tc superconductors

Frequent JJ decoupling is the main origin of AC losses in the superconducting state

AC losses in high pressure synthesized MgB2 bulk rings measured by transformer method

Study on demagnetization behaviour of no-insulation (NI) persistent-current mode (PCM) HTS coil under external AC fields by 3D FEM simulation

Analytical investigation of magnetic field distributions around superconducting strips on ferromagnetic substrates

Measurement of the ac conductivity of a niobium single crystal in a swept magnetic field

Magnetic flux penetration and AC loss in a composite superconducting wire with ferromagnetic parts

Thin superconducting disk with field-dependent critical current: Magnetization and ac susceptibilities

AC losses in type-II superconductors induced by nonuniform fluctuations of external magnetic field

AC loss of Bi-2212 superconducting ring for limiter

Sensitivity of Niobium Superconducting Cavities to Trapped Magnetic Flux Dissipation

Study of History Effect of Vortex Matter by AC Susceptibility

Contactless estimation of critical current density in thin superconducting films and its temperature dependence using ac magnetic measurements

Critical Current Density Measurement of Thin Films by AC Susceptibility Based on the Penetration Parameter H

AC loss investigation in MgB 2 multifilamentary wires: a numerical study.

Magnetic shielding properties of high-temperature superconducting tubes subjected to axial fields

Multi-mode Analysis of Surface Losses in a Superconducting Microwave Resonator in High Magnetic Fields

Frequency dependence of ac susceptibility of monofilament Bi-2223/Ag superconducting tapes