Abstract:High-power density all-superconducting rotating machines have potential for application in electrical aircraft motors. However, superconductors in the armature windings of such rotating machines carry AC currents under AC/rotating magnetic fields, resulting in AC losses For. reducing AC loss, low-cost, round magnesium diboride (MgB2) wires are one promising material due to their multifilamentary structure, fine filament size and tight twist. To date, previous 3D AC loss simulations have focused on MgB2 wires with a magnetic matrix operating at low frequency and 4.2 K, which are not relevant to aviation applications. In this work, 3D simulations of magnetization loss at 20 K of twisted 2-filament and 54-filament wires with a non-magnetic matrix are carried out using the finite element method, based on the H-formulation, with AC field amplitudes from 0.1 T to 2 T and frequencies up to 200 Hz. The measured Jc(B, 20 K) and n(B, 20 K) data of a non magnetic MgB- 2 wiremanufactured by Hyper Tech Research is assumed as input parameters. For the 2-filament wire, the operational frequency,the twist pitch, the filament size, the matrix resistivity, and inter-filament gap have been varied to systematically study their impacts on magnetization loss and its loss components (hysteresis loss, coupling loss and eddy currents). The simulation results show that the 2-filament wire with a 5 mm twist pitch and a higher resistivity matrix operated at 50 Hz has the lowest magnetization loss through decoupling the filaments. Furthermore, a lower coupling loss at 200 Hz for field amplitudes exceeding 1 T is observed, this is because critical coupling frequency fc shifts to small values with increasing field amplitudes. For the 54-filament MgB2 wire, the magnetization loss of a 5 mm twist pitch and a higher resistivity matrix wire operated at 50 Hz is estimated. The simulations show that the hysteresis loss of the 54-filament wire can be well predicted by the analytical hysteresis loss equation for a cylindrical superconductor multiplied by 54 (the number of filaments) because the filaments are in an uncoupled state. Good agreement is also observed between the simulated coupling loss and the analytical coupling loss equation from Wilson book for a circular-arranged multifilamentary superconducting wire.

AC loss investigation in MgB 2 multifilamentary wires: a numerical study.

Numerical modelling of MgB2 conductors for high power AC transmission

3D numerical simulation of magnetization loss in multifilamentary MgB2wires at 20 K

AC losses in high pressure synthesized MgB2 bulk rings measured by transformer method

Study of the MgB2 grain size role in ex-situ multifilamentary wires with thin filaments

Numerical Simulations of Ac Losses in Multifilamentary Superconducting Tapes under Bending Strain

Magnetic flux penetration and AC loss in a composite superconducting wire with ferromagnetic parts

Numerical estimation of AC losses in Bi2212/Ag wire and coil

A Conceptual Design Optimization for a MgB 2 DC Transmission Line

Progress of Multi-Filamentary MgB2 Superconductor Wires and Tapes

The Critical Current Density of Advanced Internal-Mg-diffusion-processed MgB2wires

AC loss in granular superconducting MgB2 at radio frequencies

AC Loss Computation in Large-Scale Low-Temperature Superconducting Magnets: Multi-Scale and Semi-Analytical Procedures

AC Losses of Copper Stabilized Multifilament YBCO Coated Conductors

Estimation of Self-Field Critical Current and Transport-Magnetization AC Losses of Roebel Cables

characteristic research of multi-core Bi-2223/Ag strip AC loss

Experimental Studies of the Quench Behaviour of Mgb2 Superconducting Wires for Fault Current Limiter Applications

An Analysis of AC Loss of Bi-2212 CICC

Improving Superconducting Properties of 100 M Class MgB2 Wire with 18+1 Filaments Produced Via Internal Mg Diffusion Process

Numerical study on flux-jump occurrence in a cup-shaped MgB2 bulk for magnetic shielding applications

Effect of interface angle, added powder and applied deformation on the transport current and structure of scarf joints of single- and multi-core unreacted MgB2 wires