A transparent radiative cooling photonic structure with a high NIR reflection

Saichao Dang,Hong Ye
DOI: https://doi.org/10.48550/arXiv.2102.02965
2021-02-05
Abstract:Buildings or vehicles with transparent envelope can be heated up by sunlight, causing energy consumption for cooling and in extreme cases leading to vehicular heatstroke in a hot climate. Because only visible light for illumination is essential for these applications, the NIR solar radiation should be reflected to reduce heat gain and the infrared radiation emission should be enhanced for further cooling by using the sky as a heat sink. With a high NIR reflection, a transparent radiative cooling photonic structure consisting of 2D silica gratings atop ZnO/Ag/ZnO is demonstrated for energy-saving and safety. With 81% visible light transmitted, 57% NIR solar radiation reflected and 90% thermal infrared radiation emitted, a synthetical cooling is realized by the photonic structure. Theoretically, the total power of reflected solar irradiance and radiative cooling in infrared of this structure is more than double that of a planar silica. The field test shows that with this structure, the temperature rise of a sealed chamber covered by planar silica can be cooled down by 53.7%. This work shows that the concept of daytime radiative cooling can be applied in combination with the utilization of visible light, indicating a great practical application.
Optics,Applied Physics
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is: in a hot climate, how to achieve passive daytime radiative cooling of buildings or vehicles through transparent photonic structures, in order to reduce the internal temperature rise caused by sunlight, thereby saving energy and improving safety. Specifically, the author proposes a new type of transparent photonic structure, aiming to allow only visible light to pass through for illumination, while reflecting near - infrared (NIR) solar radiation to reduce heat absorption and enhancing infrared radiation emission for further cooling. ### Core of the problem 1. **Reduce energy consumption**: Due to sunlight, the temperature inside buildings or vehicles will rise, and additional energy is required for cooling. 2. **Improve safety**: Especially in vehicles, high temperatures may lead to safety problems such as heat stroke inside the vehicle. 3. **Achieve efficient cooling**: Combine daytime passive radiative cooling (DPRC) technology, use visible light while reducing unnecessary heat absorption and enhancing the radiative cooling effect. ### Solution The author proposes a transparent photonic structure (SPZAZ) composed of a two - dimensional silica grating and a ZnO/Ag/ZnO multilayer film. This structure has the following characteristics: - **High visible light transmittance**: Ensure sufficient visible light passes through to provide good illumination. - **High near - infrared reflectance**: Reflect most of the near - infrared solar radiation to reduce heat absorption. - **Strong infrared emissivity**: Enhance infrared radiation emission within the atmospheric window (8 - 13 μm) to achieve effective radiative cooling. ### Experimental results Through theoretical calculations and field tests, the research found that: - Theoretically, the total cooling power of SPZAZ (including reflected solar radiation and infrared radiation cooling) is more than twice that of planar silica. - Field tests show that under direct sunlight conditions, the temperature rise of the enclosed cavity covered with SPZAZ is 53.7% less than that of the cavity covered with planar silica. ### Conclusion This work demonstrates the great potential of transparent photonic structures in daytime passive radiative cooling, especially in buildings or vehicles that require transparent shells, and can achieve the dual goals of energy saving and safety.