Abstract:Introduction Reducing CO2 emissions for addressing climate change concerns is becoming increasingly important as the CO2 concentration in the atmosphere has increased rapidly since the industrial revolution. Most of currently investigated mitigation processes require CO2 in a concentrated form. However, CO2 is emitted from large sources, such as coal-fired power plants, at ~15% concentration. Therefore, capturing CO2 from dilute streams is an important step for many mitigation methods. Membrane separation methods are particularly promising due to potentially high CO2 selectivities and fluxes. By a proper choice of the pore size and surface properties, the CO2 transport across a membrane can be facilitated with respect to those of N2 and O2 leading to an efficient CO2 separation process. However, current membranes suffer from a poor control over the pore size on the 2-4 nm scale and surface properties required for CO2 separation. 2 We describe here novel mesoporous silica membranes containing surface-attached amino groups promising for CO2 separation from dilute sources. Defect-free mesoporous silica membranes on porous alumina supports exhibiting 26~28A pores were obtained by spin-coating (~5-7 μm thick) and solution growth methods. Several kind of amino groups were attached to the membrane surface using amino-containing silicon alkoxides, such as 3-aminopropyltriethoxysilane. Smaller pores (~18-22A) were obtained by silylating the original calcined membranes with silane coupling agents. The characterization of the silylated silica membranes by BET surface area measurements, N2 adsorption pore size analysis and TGA confirmed that silylation technique was successful in decreasing the membrane pore size by ~8 A which is required for completely filling the pore volume with surface attached aminopropylsilyl groups and achieving facilitated transport of CO2. CO2/N2 separation on amine-modified silica membranes was investigated at 20-70C and transmembrane pressure drop of 0.2-1 atm as a function of the pore size and the nature of the amino group using a Wicke-Kalenbach permeability cell. The membrane performance was evaluated with respect to permeance and separation selectivity, determined by a GC/MS analysis of the feed, permeate, and retentate streams.

Design Rationale for CO 2 Separation Membranes with Micropatterned Surface Structures

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

Laser Patterning of Porous Support Membranes to Enhance the Effective Surface Area of Thin-Film Composite-Facilitated Transport Membranes for CO 2 Separation

Interfacial polymerization of COF-polyamide composite membranes modified with ionic liquids for CO 2 separations

Fabrication of Polydimethysiloxane (PDMS) Dense Layer on Polyetherimide (PEI) Hollow Fiber Support for the Efficient CO2/N2 Separation Membranes

Rational Design of MXene Hollow Fiber Membranes for Gas Separations

Constructing Thin and Cross-Linked Polyimide Membranes by Interfacial Reaction for Efficient CO 2 Separation

Construction of high-performance thin-film composite membrane for CO 2 separation via interface engineering

Ultrapermeable Composite Membranes Enhanced Via Doping with Amorphous MOF Nanosheets

Fabrication And Characterization Of Surface-Patterned Thin-Film Composite Membranes

Interfacial Polymerization of Self-Standing Covalent Organic Framework Membranes at Alkane/Ionic Liquid Interfaces for Dye Separation

Patterning Flat-Sheet Poly(vinylidene Fluoride) Membrane Using Templated Thermally Induced Phase Separation

Ultrathin Covalent Organic Framework Membranes via a Multi‐Interfacial Engineering Strategy for Gas Separation

High-performance CO2-selective Hybrid Membranes by Exploiting MOF-breathing Effects.

Carbon Molecular Sieve Membrane Preparation by Economical Coating and Pyrolysis of Porous Polymer Hollow Fibers

Gas Permeation and Separation Characteristics of Microporous TpHz COF Membranes Synthesized by Substrate-Assisted Interfacial Polymerization

High-Performance Mixed-Matrix Membranes Using a Zeolite@MOF Core-Shell Structure Synthesized via Ion-Exchange-Induced Crystallization and Post-Synthetic Conversion

Vapor/Vapor‐Solid Interfacial Growth of Covalent Organic Framework Membranes on Alumina Hollow Fiber for Advanced Molecular Separation

A microporous polymer TFC membrane with 2-D MOF nanosheets gutter layer for efficient H2 separation

Influence of Substrate Processing and Interfacial Polymerization Conditions on the Surface Topography and Permselective Properties of Surface-Patterned Thin-Film Composite Membranes

Ordered Mesoporous Silica Membranes for CO2 Separation from Flue Gas