Abstract:The experimental study of natural convection for solar collectors with different coating materials and being equipped with guide plate is carried out step by step through the experimental platform of solar-assisted fuel cells under the research background of renewable total energy systems, which mainly include solar energy comprehensive utilization, solid oxide fuel cells, gas turbine and Kalina refrigeration cycle. The three-dimensional mathematical model on natural convection and forced convection of solar collectors is established to study the flow and heat transfer data with the field synergy and entransy principle on the basis of experimental verification. The natural convection results show that the thermal efficiency and the entransy increment rise gradually with the absorption rate increasing from 0.95 to 1.0 and the emission rate decreasing from 0.06 to 0.16, and the thermal efficiency of experiment for high absorption is 1.17% higher than that of low absorption. The thermal efficiency of experiment for solar collectors increases by 2.17% after equipped with guide plate, because the mixed flow in the vacuumvacuum tube disappears and the guide plate strengthens the flow at the bottom of the vacuum tube. The reasonable plate thickness of guide plate for all-glass vacuum tube water heaters is 2 mm, the reasonable plate length of guide plate is 60-100 mm distance from the bottom of the vacuum tube, and the reasonable position of guide plate is 16-20 mm above the axial line of the vacuum tube. The forced convection results show that the Reynolds number and the Nusselt number decrease gradually after the fluent flow into manifold but the Reynolds number and the Nusselt number increase gradually at the exit of manifold. Although the fluent is extremely volatile along the vacuum tube, the Reynolds number and the Nusselt number of horizontal double collectors are higher than that of vertical single collector. The angle between speed vector and temperature gradient vector is 0° with downward fluid and 180° with upward flow, because the collector overall temperature is gradually reduced from vacuum tube bottom to manifold. It makes more fluid absorb the bottom heat, because the internal flow of vacuum tube is smooth and the mixed flow in vacuum tube disappears. Manifold velocity gradually decreases because there is backflow interiorly, but temperature increases because fluid absorbs solar radiation, and the field synergy in collector outlet is higher than others because temperature field is consistent with velocity field according to numerical simulation. Although the entransy increments of vertical single collector and horizontal double collectors are negative values in initial period, they gradually rise with the heat time increasing. There are 2 parts for entransy dissipation in the vacuum tube. The entransy dissipation of horizontal double collectors (from 0.2 to 1.8 m) is less than that of vertical single collector along the vacuum tube axis because the definite condition is to give heat flux boundary. The entransy dissipation of horizontal double collectors (from 0 to 0.2 m) is less than that of vertical single collector along the vacuum tube axis because the definite condition is constant temperature when hot water in vacuum tube flows into water tank and heat transfer occurs between hot and cold water. Enhancement of heat transfer effect of horizontal double collectors is better than that of vertical single collector, because its entransy increment is higher than that of vertical single collector and its entransy dissipation is better than that of vertical single collector. It is determined that the solar collectors with guide plate can be adopted in natural convection and the horizontal double collectors can be employed in forced convection in the thermal field of solar-assisted fuel cells with low and medium temperature.

Metal glass vacuum tube solar collectors are approaching lower-medium temperature heat application

Straight-through All-Glass Evacuated Tube Solar Collector for Low and Medium Temperature Applications

Performance study of a static low- concentration evacuated tube solar collector for medium-temperature applications

Medium-temperature Solar Collectors with All-glass Solar Evacuated Tubes

Solar-driven High-Temperature Steam Generation at Ambient Pressure

Collecting Performance of an Evacuated Tubular Solar High-Temperature Air Heater with Concentric Tube Heat Exchanger

Developments of Solar Collectors in China

Numerical and Experimental Study of a Novel Vacuum Photovoltaic/thermal (PV/T) Collector for Efficient Solar Energy Harvesting

Graded Al-N/Al Absorbing Surfaces for All-Glass Evacuated Tubular Collectors - R, D and Production: Bridging the Gap

An Experimental Investigation on a Small-Sized Parabolic Trough Solar Collector for Water Heating in Cold Areas

Performance studies of novel all-glass heat pipe evacuated collector tube integrating numerical simulation and experiment method

Experiment and simulation for convective heat transfer in all-glass evacuated tube solar collectors

Air-Type Vacuum-Tube Solar Collector Design and Heat Collection Performance Test

Comparative thermal performance: An experimental study of self-stored U-pipe vacuum tube collectors operated in closed mode

High-Efficiency Superheated Steam Generation for Portable Sterilization under Ambient Pressure and Low Solar Flux

Theoretical Study of a Novel Intermediate Temperature Photovoltaic/thermal System Equipped with Heat Pipe and Evacuated Tube

Heat Loss and Energy Efficiency Investigation of Vacuum Flat Plate Photovoltaic/Thermal Collectors

Study on the residual gas in all-glass evacuated collector tubes

Developments of CPC solar evacuated glass tube collector with a novel selective coating

Simulation and Experimental Study of an Air Tube-Cavity Solar Receiver

Single cathode sputtered selective solar absorbing surfaces