Abstract:Increasing working voltage is a promising way to increase the energy density of lithium-ion batteries. Cycling and rate performance deteriorated due to excessive electrolyte decomposition and uncontrolled formation of a cathode–electrolyte interface (CEI) layer at a high voltage. A new concept is proposed to construct a high-voltage-stable electrode–electrolyte interface. An elastomeric poly(dimethyl siloxane) (PDMS) binder is incorporated into the electrode to modify the LiNi0.5Co0.2Mn0.3O2 (NCM 523) particle surface via an in situ cross-linking reaction between hydroxy-terminated PDMS and methyl trimethoxy silane promoted by moisture at ambient conditions (MPDMS). Improved electrochemical performance is achieved with the MPDMS binder in terms of reversible capacity (201 vs 185 mAh·g–1 at 0.2C), capacity retention (80 vs 68%, after 300 cycles at 1C), and rate performance (55.6% increase at 5C), as demonstrated by the NCM 523||Li half-cell. The NCM 523||graphite full-cell also shows improved performance at 4.6 V (147 vs 128 mAh·g–1, 82 vs 76%, after 200 cycles at 1C). The mechanism studies indicate that MPDMS exerts multiple effects, including cathode surface passivation, solvation structure tuning, electrolyte uptake enhancement, and mechanical stress relief. This work provides an inspiring route to realize high-voltage application of lithium-ion battery technology.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c01245.Viscosity changes of NCM-PVDF and NCM-MPDMS/PVDF electrode slurries at different shear rates; cross-sectional SEM images of NCM-PVDF and NCM-MPDMS/PVDF electrode applied with ion polishing after 100 cycles; discharge specific capacity of the NCM-PVDF and NCM-MPDMS/PVDF electrodes at different voltages with different current densities; cycling and rate performance of the NCM-PVDF and NCM-MDMS/PVDF electrodes between 2.8 and 4.3 V; SEM images of NCM-PVDF and NCM-MPDMS/PVDF electrodes before cycling; cross-section SEM images of the NCM-PVDF and NCM-MPDMS/PVDF electrodes after 100 cycles via ion polishing treatment; TEM images of NCM 523 pristine particles, NCM-MPDMS/PVDF, and NCM-PVDF electrodes before cycling; EDS images of NCM-PVDF NCM-MPDMS/PVDF electrodes before and after 100 cycles; the electrochemical impedance (EIS) profiles of the cells measured at different cycles and canning voltammetry curves at different sweep rates between 2.8 and 4.6 V for NCM-PVDF and NCM-MPDMS/PVDF electrodes; C 1s spectrum of the NCM-PVDF and NCM-MPDMS/PVDF electrodes before and after 100 cycles; Ni 2p XPS spectra of the NCM-PVDF and NCM-MPDMS/PVDF electrodes after 100 cycles; active adsorption sites of lithium ions in PDMS, PVDF, EC, and DMC and their corresponding adsorption energies (PDF)This article has not yet been cited by other publications.

Tailored PVDF Graft Copolymers via ATRP as High-Performance NCM811 Cathode Binders

Poly (Propylene Carbonate) with Extremely Alternating Structure Used as Binders for High-Loading Cathodes by Solvent-Free Method in High-Performance NCM811 Batteries

Novel polyimide binders integrated with soft and hard functional segments ensuring long-term high-voltage operating stability of high-energy NCM811 lithium-ion batteries up to 4.5 V

Novel polyimide binder for achieving high-rate capability and long-term cycling stability of LiNi0.8Co0.1Mn0.1O2 cathode via constructing polar and micro-branched crosslinking network structure

Improving High-Nickel Cathode Active Material Performance in Lithium-Ion Batteries with Functionalized Binder Chemistry

Striking a Balance: Exploring Optimal Functionalities and Composition of Highly Adhesive and Dispersing Binders for High‐Nickel Cathodes in Lithium‐Ion Batteries

Biobinder Nanocoating for Upgrading the Assembling Structures of High-Capacity Composite Electrodes with a Robust Polymeric Artificial Solid Electrolyte Interphase

Surface modification enabling 4.7 V Nickel-rich layered cathode with superior long-term cyclability via novel functional polyimide binders

One Stone for Multiple Birds: A Versatile Cross-Linked Poly(dimethyl siloxane) Binder Boosts Cycling Life and Rate Capability of an NCM 523 Cathode at 4.6 V

Toward Greener Lithium-Ion Batteries: Aqueous Binder-Based LiNi0.4Co0.2Mn0.4O2 Cathode Material with Superior Electrochemical Performance

Fluorine‐Free Poly(ionic Liquid)s Binders for the Aqueous Processing of High‐Voltage NMC811 Cathodes

Highly Elastic Block Copolymer Binders for Silicon Anodes in Lithium-Ion Batteries

Bifunctional low molecular weight polyacrylic acid as aqueous binder and coating agent enables high performance LiMn 2 O 4 cathode for lithium-ion batteries

Cost‐Effective Solutions for Lithium‐Ion Battery Manufacturing: Comparative Analysis of Olefine and Rubber‐Based Alternative Binders for High‐Energy Ni‐Rich NCM Cathodes

New Insights into the Mechanism of Enhanced Performance of Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 with a Polyacrylic Acid-Modified Binder

A novel polymer composite as cathode binder of lithium ion batteries with improved rate capability and cyclic stability

A Formula to Customize Cathode Binder for Lithium Ion Battery

Poly(amidoamine) dendrimer-induced 3D crosslinked network binder for LiFePO4 cathode: endowing battery with superior cycling stability

Boosting the Performances of Water-Processable LiNi0.5Co0.2Mn0.3O2 Cathode with Conventional White Latex As Binder Ingredient

Polyacrylonitrile Based Triblock Copolymer Binder Enabling Excellent Performance toward LiNi 0.5 Mn 1.5 O 4 and Sulfur Based Batteries

Wet‐Processable Binder in Composite Cathode for High Energy Density All‐Solid‐State Lithium Batteries