Abstract:Increasing working voltage is a promising way to increase the energy density of lithium-ion batteries. Cycling and rate performance deteriorated due to excessive electrolyte decomposition and uncontrolled formation of a cathode–electrolyte interface (CEI) layer at a high voltage. A new concept is proposed to construct a high-voltage-stable electrode–electrolyte interface. An elastomeric poly(dimethyl siloxane) (PDMS) binder is incorporated into the electrode to modify the LiNi0.5Co0.2Mn0.3O2 (NCM 523) particle surface via an in situ cross-linking reaction between hydroxy-terminated PDMS and methyl trimethoxy silane promoted by moisture at ambient conditions (MPDMS). Improved electrochemical performance is achieved with the MPDMS binder in terms of reversible capacity (201 vs 185 mAh·g–1 at 0.2C), capacity retention (80 vs 68%, after 300 cycles at 1C), and rate performance (55.6% increase at 5C), as demonstrated by the NCM 523||Li half-cell. The NCM 523||graphite full-cell also shows improved performance at 4.6 V (147 vs 128 mAh·g–1, 82 vs 76%, after 200 cycles at 1C). The mechanism studies indicate that MPDMS exerts multiple effects, including cathode surface passivation, solvation structure tuning, electrolyte uptake enhancement, and mechanical stress relief. This work provides an inspiring route to realize high-voltage application of lithium-ion battery technology.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c01245.Viscosity changes of NCM-PVDF and NCM-MPDMS/PVDF electrode slurries at different shear rates; cross-sectional SEM images of NCM-PVDF and NCM-MPDMS/PVDF electrode applied with ion polishing after 100 cycles; discharge specific capacity of the NCM-PVDF and NCM-MPDMS/PVDF electrodes at different voltages with different current densities; cycling and rate performance of the NCM-PVDF and NCM-MDMS/PVDF electrodes between 2.8 and 4.3 V; SEM images of NCM-PVDF and NCM-MPDMS/PVDF electrodes before cycling; cross-section SEM images of the NCM-PVDF and NCM-MPDMS/PVDF electrodes after 100 cycles via ion polishing treatment; TEM images of NCM 523 pristine particles, NCM-MPDMS/PVDF, and NCM-PVDF electrodes before cycling; EDS images of NCM-PVDF NCM-MPDMS/PVDF electrodes before and after 100 cycles; the electrochemical impedance (EIS) profiles of the cells measured at different cycles and canning voltammetry curves at different sweep rates between 2.8 and 4.6 V for NCM-PVDF and NCM-MPDMS/PVDF electrodes; C 1s spectrum of the NCM-PVDF and NCM-MPDMS/PVDF electrodes before and after 100 cycles; Ni 2p XPS spectra of the NCM-PVDF and NCM-MPDMS/PVDF electrodes after 100 cycles; active adsorption sites of lithium ions in PDMS, PVDF, EC, and DMC and their corresponding adsorption energies (PDF)This article has not yet been cited by other publications.

Biobinder Nanocoating for Upgrading the Assembling Structures of High-Capacity Composite Electrodes with a Robust Polymeric Artificial Solid Electrolyte Interphase

An Aqueous Binder for High-Areal-Capacity Fe3O4-Based Anodes in Lithium-Ion Batteries

Poly(amidoamine) dendrimer-induced 3D crosslinked network binder for LiFePO4 cathode: endowing battery with superior cycling stability

Highly Elastic Block Copolymer Binders for Silicon Anodes in Lithium-Ion Batteries

A universal cross-linking binding polymer composite for ultrahigh-loading Li-ion battery electrodes

A Formula to Customize Cathode Binder for Lithium Ion Battery

New Insights into the Mechanism of Enhanced Performance of Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 with a Polyacrylic Acid-Modified Binder

Novel polyimide binder for achieving high-rate capability and long-term cycling stability of LiNi0.8Co0.1Mn0.1O2 cathode via constructing polar and micro-branched crosslinking network structure

Faster and better: A polymeric chaperone binder for microenvironment management in thick battery electrodes

A biopolymer network for lean binder in silicon nanoparticle anodes for lithium-ion batteries

Interface‐Adaptive Binder Enabled by Supramolecular Interactions for High‐Capacity Si/C Composite Anodes in Lithium‐Ion Batteries

Poly (Propylene Carbonate) with Extremely Alternating Structure Used as Binders for High-Loading Cathodes by Solvent-Free Method in High-Performance NCM811 Batteries

A New Universal Aqueous Conductive Binder via Esterification Reinforced Electrostatic/H-bonded Self-assembly for High Areal Capacity and Stable Lithium-Ion Batteries

One Stone for Multiple Birds: A Versatile Cross-Linked Poly(dimethyl siloxane) Binder Boosts Cycling Life and Rate Capability of an NCM 523 Cathode at 4.6 V

Effect of poly (acrylic acid)/Poly (vinyl alcohol) blending binder on electrochemical performance for lithium iron phosphate cathodes

Mn2+ Ions Capture and Uniform Composite Electrodes with PEI Aqueous Binder for Advanced LiMn2O4-Based Battery

Li0.5PAA domains filled in porous sodium alginate skeleton: A 3D bicontinuous composite network binder to stabilize micro-silicon anode for high-performance lithium ion battery

A Physically Cross-Linked Hydrogen-Bonded Polymeric Composite Binder for High-Performance Silicon Anodes

Tailored PVDF Graft Copolymers via ATRP as High-Performance NCM811 Cathode Binders

In-Situ Polymerized Binder: A Three-in-One Design Strategy for All-Integrated SiO x Anode with High Mass Loading in Lithium Ion Batteries

Phase-Separation-Induced Porous Lithiophilic Polymer Coating for High-Efficiency Lithium Metal Batteries