Abstract:Self-expanding frames for minimally invasive implants are typically made from nitinol wires and are heat treated to maintain the desired shapes. In the process of heat treatment, nitinol structures are placed in a high-temperature oven, while they are confined by a fixture. During this process, nitinol exerts a high amount of force. Accordingly, a fixture requires high mechanical strength and temperature resistance; this is why fixtures are typically made from metals. The use of metal fixture also increases the turnaround time and cost. However, accelerating this process is beneficial in many applications, such as rapid development of medical implants that are patient-specific. Inspired by the use of sacrificial layers in microfabrication technology, here we propose a novel method for shape setting nitinol wires using a sacrificial metal fixture. In this process, the nitinol wires are first aligned inside copper hypotubes. Next, the forming process is done using hand-held tools to shape complex geometrical structures, annealing the nitinol reinforced by copper, and then selectively etching copper hypotubes in ammonium persulfate solutions. In this process, other sacrificial cores, which are 3D printed or cast from low-cost polymers, are also used. This combination of polymeric cores and minimal use of metals enables reducing the cost and the turnaround time. As a proof of concept, we showed that this process was capable of fabricating springs with mm or sub-mm diameters. The result showed a change of less than 5% in the intended diameter of the nitinol spring with diameters ranging from ~ 0.7 to 1.9 mm, which confirms copper as a suitable sacrificial fixture to obtain the desired complex geometry for nitinol. A metric, based on the elastic strain stored in copper is suggested to predict the possible variation of the intended dimensions in this process. Finally, to demonstrate the potential of this method, as proof of concept, we fabricated NiTi wire frames designed for anchoring through the atrial septum. These frames demonstrated septal defect occluders that were designed based on a patient's cardiac image available in the public domain. This low-cost rapid fabrication technique is highly beneficial for a variety of applications in engineering and medicine with specific applications in rapid prototyping of medical implants.

Optimizing femtosecond laser fabricating strategy of Nitinol hypotube for vascular interventional surgery

Experimental Analysis of In Situ Fenestration of Endovascular Stent-Grafts: Comparison between Needle and Laser Puncture

Nickel‐Titanium Alloy Laser Micromachining: A Review of Nitinol Laser Processes and Optimization for High‐Speed Laser Cutting

Mitigation of bio-corrosion characteristics of coronary artery stent by optimising fs-laser micromachining parameters

Cutting NiTi with Femtosecond Laser

Assessment of mechanical and biocompatible performance of ultra-large nitinol endovascular devices fabricated via a low-energy laser joining process

Tissue Cutting Mechanics and Applications for Needle Core Biopsy and Guidance

Analysis of the Whole Implementation Process and Optimization of a Nitinol Superelastic Stent

TEM study of the Ni-Ti shape memory micro-wire

Study of insertion force and deformation for suturing with precurved NiTi guidewire.

Investigations on the interaction of laser parameters for efficient microdrilling of NiTiV smart alloy system

Micro/nanostructured surface modification using femtosecond laser pulses on minimally invasive electrosurgical devices

Control of the Kerf Size and Microstructure in Inconel 738 Superalloy by Femtosecond Laser Beam Cutting

High-Performance Self-Expanding NiTi Stents Manufactured by Laser Powder Bed Fusion

Laser drilling of micro-holes with controllable taper using 355 nm nanosecond laser

High-Precision Implant Cavity Fabrication Using Femtosecond Lasers

Effect of Angle of Incident on Taper Angle in Femtosecond Laser Machining for Fabrication of Cross Section Analysis Specimen

Micro–Nano‐Texturing Inner Surfaces of Small‐Caliber High Aspect Ratio and Superhydrophobic Artificial Vessels using Femtosecond Laser Filamenting Pulses

Optimization of the femtosecond laser trepan drilling strategy on IN792 for improving hole geometrical characteristics and machining efficiency

Low-cost prototyping of nitinol wires/frames using polymeric cores and sacrificial fixtures with application in individualized frames anchoring through the atrial septum

Optimizing Hole Shape and Improving Surface Quality of Inconel 718 Alloy by High-Temperature Chemical Assisted Laser Processing