Digoxin radioimmunoassay: Capabilities and limitations

T. W. Smith

DOI: https://doi.org/10.1007/BF01086154

1976-04-01

Journal of Pharmacokinetics and Biopharmaceutics

Abstract:

What problem does this paper attempt to address?

Chemical Modification on Top of Nanotopography to Enhance Surface Properties of PDMS

Jueyu Li,Min Wang,Yanbin Shen

DOI: https://doi.org/10.1016/j.surfcoat.2011.09.052

2012-01-01

Abstract:In the present study we report the surface modification of polydimethylsiloxane (PDMS) via combining both physical and chemical modification routes. Well defined nanostructures were created on PDMS surface through anodized aluminum oxide (AAO) template method. On top of the nanostructures, polyvinyl alcohol (PVA) was coated after the nano patterned PDMS was exposed to air plasma. The influence of the combined modification on surface properties of PDMS was examined by ATR-FTIR and water contact angle measurement. The impact of plasma pretreatment time and storage time in ambient environment were investigated, and property of films with or without nanostructures was compared. Experimental results show that long-term stable hydrophilic surfaces of PDMS can be achieved by PVA coating and be further improved by the surface nanostructures. The modified PDMS was also used for cell culture. The results indicate that both nanostructuring and chemically modifying the PDMS surface improves cell growth. Additionally, combination of these surface modifications has an additive effect on cell proliferation.
One-step photochemical introduction of nanopatterned protein-binding functionalities to oligo(ethylene glycol)-terminated self-assembled monolayers.

Robert E Ducker,Stefan Janusz,Shuqing Sun,Graham J Leggett

DOI: https://doi.org/10.1021/ja0749800

IF: 15

2007-01-01

Journal of the American Chemical Society

Abstract:Exposure of oligo(ethylene glycol) (OEG)-terminated self-assembled monolayers (SAMs) to UV light leads to the formation of aldehyde groups, leading to a simple one-step method for the introduction of reactive functional groups to protein-resistant surfaces. X-ray photoelectron spectroscopy has been used to demonstrate binding of amines to the modified surfaces, while surface plasmon resonance has shown that proteins are covalently bound. Modified OEG monolayers bind streptavidin at least as well as N-hydroxysuccinimidyl ester functionalized monolayers. Micrometer and nanometer-scale patterns are conveniently fabricated by exposing the monolayers using, respectively, a mask and a scanning near-field optical microscope.
Mesoscale Protein Patterning on a Self-Assembled Monolayer Coated Silicon Surface Through Nanosphere Lithography

Andrew Schlereth,Panae Noomuna,Pei Gao

DOI: https://doi.org/10.3866/pku.whxb201701032

2017-01-01

Abstract:The patterning and immobilization of protein molecules onto functionalized silicon substrate through surface silane chemistry is of interest because protein patterning is an important prerequisite for the development of protein-based diagnostics in biological and medicinal fields. As a model system, mesoscale netty lysozyme arrays were assembled on oxidized undecyltrichlorosilane (UTSox) monolayer coated silicon surface through nanosphere lithography. The size of the arrays ranged from nanometer to micrometer can be easily adjusted by changing the size of nanospheres applied on the surface. By using nanosphere lithography, we are capable of fabricating a regular array of protein islands over centimeter sample regions. The created lysozyme protein patterns were characterized by atomic force microscopy (AFM) and fluorescence microscope, respectively. The analysis has demonstrated that this newly established approach offers a faster and more reliable process to fabricate netty protein arrays over large areas compared to conventional scanning-probe based fabrication methods. Furthermore, the carboxylic acid-terminated layer on surfaces is particularly effective for immobilizing protein molecules through either electrostatic interactions or covalent attachment via imine bonds. Therefore, the negative-toned protein structure on the surface with carboxylic acid groups coated on the bare areas makes it possible to fabricate two types of protein molecules on one surface.
A New Method to Pattern Silicon Surface with Chemical Functional Groups

RG Wu,JH Ouyang,XS Zhao,XH Huang,HZ Huang,NZ Wu

DOI: https://doi.org/10.3866/pku.whxb20011013

2001-01-01

Acta Physico-Chimica Sinica

Abstract:Hydrogen-terminated silicon surface was found to react with I-alkenes to produce stable monolayers. To pattern such monolayers and create surfaces with regions of different chemical functionalities, we used the combination of the photolithography and the light induced alkylation. The surfaces had been characterized by XPS, AFM, and contact angel measurement. It is shown that this procedure can be used to prepare micro-patterns of chemical functional groups on silicon substrate.
Direct patterning using protein-based water lithography

Zhen Liu,Zhitao Zhou,Hu Tao,Keyin Liu

DOI: https://doi.org/10.1109/memsys.2018.8346600

2018-01-01

Abstract:We report a facile micro-patterning method on protein substrates using the high-precision inkjet printing technology. Water - either pure or functionally doped - is used as the "exposure" source and water-dissolvable silk fibroin as the resist. Micropatterns of similar to 16 mu m (including both planar and greyscale ones) are successfully demonstrated and the resolution can be further improved by using a smaller nozzle size (therefore smaller droplets) and optimized printing conditions. The printing parameters are comprehensively investigated to improve the lithographic performances. With a subsequent lift-off or ion beam etching process, metallic patterns can be fabricated on a variety of substrates including planar and even curved surfaces. The direct fabrication of microlens arrays with adjustable focal lengths are demonstrated, underscoring the utility of applying this approach as an environmental friendly, low-cost, high yield and flexible alternative to fabricate functional patterns for biomedical, optical and photonic applications.
Pulmonary arteriosclerosis produced by hyperoxemic normotensive perfusion.

L. Cohn,J. Kosek,W. Angell

DOI: https://doi.org/10.5555/URI:PII:0039606071900419

IF: 4.348

1971-11-01

Surgery

Abstract:
An Extremely Simple and Effective Strategy to Tailor the Surface Performance of Inorganic Substrates by Two New Photochemical Reactions

Xiliang Cao,Tong Zhang,Jianyuan Deng,Lei Jiang,Wantai Yang

DOI: https://doi.org/10.1021/am302582x

IF: 9.5

2013-01-01

ACS Applied Materials & Interfaces

Abstract:This article reports on a new sequential strategy to fabricate monolayer functional organosilane films on inorganic substrate surfaces, and subsequently, to pattern them by two new photochemical reactions. (1) By using UV light (254 nm) plus dimethylformamide (DMF), a functional silane monolayer film could be fabricated quickly (within minutes) under ambient temperature. (2) The organic groups of the formed films became decomposed in a few minutes with UV irradiation coupled with a water solution of ammonium persulfate (APS). (3) When two photochemical reactions were sequentially combined, a high-quality patterned functional surface could be obtained thanks to the photomask.
Preparation and Photolithography of Self-Assembled Monolayers of 10-Mercaptodecanylphosphonic Acid on Glass Mediated by Zirconium for Protein Patterning.

Xuemingyue Han,Shuqing Sun,Tao He

DOI: https://doi.org/10.1016/j.colsurfb.2013.02.030

IF: 5.999

2013-01-01

Colloids and Surfaces B Biointerfaces

Abstract:Self-assembled monolayers (SAMs) formed by adsorption of octadecylphosphonic acid (ODPA) on zirconium mediated glass substrates were prepared. In this sandwich structure, Zr4+ was used as a bi-linker to bind phosphonic acid head group in ODPA to glass substrates. The contact angle of the as-prepared SAMs was measured to be around 104°. X-ray photoelectron spectroscopy (XPS) characterization indicated the modification of Zr4+ on glass substrates was critical for the formation of reasonably dense, well-ordered SAMs similar in quality to those typically formed on other metal oxide surfaces. Bifunctional molecule, 10-mercaptodecanylphosphonic acid (MDPA), bearing thiol terminal groups for various chemical reactions, was synthesized and formed SAMs on glass using the same approach, which allowed us to control the surface chemistry and functionality through photooxidation of the thiol terminal group. Photopatterning of proteins was performed first by exposing the SAMs to UV light through a mask, followed by protein immobilization to the masked regions through a heterobifunctional linker, while the exposed areas prohibit nonspecific protein absorption. The present strategy, which combined the SAMs assembly and photolithography, offered a facile approach for the fabrication of biomolecule patterning and could be applied to construction of biochips and other applications.
A method for fabricating protein patterns on the octadecyltrichlorosialne(OTS) surface through paper swabbing.

Pei Gao,Yuguang Cai

DOI: https://doi.org/10.1016/j.ultramic.2009.03.023

IF: 2.994

2009-01-01

Ultramicroscopy

Abstract:A simple protein patterning procedure was developed for fabricating clean protein patterns ranging from nanometer to sub-millimeter scale. A carboxylic acid-terminated chemical pattern was fabricated first through the local probe oxidation on the octadecyltrichlorosilane (OTS) film under 100% relative humidity at the first. After incubating the chemical pattern in a protein solution, the sample was swabbed with a piece of ChemWipe paper to selectively remove the non-specifically adsorbed protein. After the swabbing, only the specifically immobilized protein remained on the surface, forming a protein pattern on the chemical template with a very clean background. In our approach, an anti-fouling surface or vigorous rinsing is not required, which simplifies the protein patterning process. As a demonstration of the capability of this protein patterning approach, we fabricated the lysozyme and catalase patterns on the OTS surface. Both patterns were clean and bioactive.
Method for fabrication of paper-based microfluidic devices by alkylsilane self-assembling and UV/O3-patterning.

Qiaohong He,Cuicui Ma,Xianqiao Hu,Hengwu Chen

DOI: https://doi.org/10.1021/ac303138x

IF: 7.4

2013-01-01

Analytical Chemistry

Abstract:This work presents a novel and facile method for fabricating paper-based microfluidic devices by means of coupling of hydrophobic silane to paper fibers followed by deep UV-lithography. After filter paper being simply immersed in an octadecyltrichlorosilane (OTS) solution in n-hexane for 5 min, the hydrophilic paper became highly hydrophobic (water contact angle of about 125 degrees) due to the hydrophobic OTS molecules were coupled to paper's cellulose fibers. The hydrophobized paper was then exposed to deep UV-lights through a quartz mask that had the pattern of the to-be-prepared channel network Thus, the UV-exposed regions turned highly hydrophilic whereas the masked regions remained highly hydrophobic, generating hydrophilic channels, reservoirs and reaction zones that were well-defined by the hydrophobic regions. The resolution for hydrophilic channels was 233 +/- 30 mu m and that for between-channel hydrophobic barrier was 137 +/- 21 mu m. Contact angle measurement, X-ray photoelectron spectroscopy (XPS) and attenuated total reflectance Fourier transform-infrared (ATR-FT-IR) spectroscopy were employed to characterize the surface chemistry of the OTS-coated and UV/O-3-treated paper, and the related mechanism was discussed. Colorimetric assays of nitrite are demonstrated with the developed paper-based microfluidic devices.
Highly Tunable Complementary Micro/Submicro-Nanopatterned Surfaces Combining Block Copolymer Self-Assembly and Colloidal Lithography.

Tongxin Chang,Binyang Du,Haiying Huang,Tianbai He

DOI: https://doi.org/10.1021/acsami.6b07730

IF: 9.5

2016-01-01

ACS Applied Materials & Interfaces

Abstract:Two kinds of large-area ordered and highly tunable micro/submicro-nanopatterned surfaces in a complementary manner were successfully fabricated by elaborately combining block copolymer self-assembly and colloidal lithography. Employing a monolayer of polystyrene (PS) colloidal spheres assembled on top as etching mask, polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) or polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) micelle films were patterned into micro/submicro patches by plasma etching, which could be further transferred into micropatterned metal nanoarrays by subsequent metal precursor loading and a second plasma etching. On the other hand, micro/submicro-nanopatterns in a complementary manner were generated via preloading a metal precursor in initial micelle films before the assembly of PS colloidal spheres on top. Both kinds of micro/submicro-nanopatterns showed good fidelity at the micro/submicroscale and nanoscale; meanwhile, they could be flexibly tuned by the sample and processing parameters. Significantly, when the PS colloidal sphere size was reduced to 250 nm, a high-resolution submicro-nanostructured surface with 3-5 metal nanoparticles in each patch or a single-nanoparticle interconnected honeycomb network was achieved. Moreover, by applying gold (Au) nanoparticles as anchoring points, micronanopatterned Au arrays can serve as a flexible template to pattern bovine serum albumin (BSA) molecules. This facile and cost-effective approach may provide a novel platform for fabrication of micropatterned nanoarrays with high tunability and controllability, which are promising in the applications of biological and microelectronic fields.
Designing mamdani type fuzzy rule using a collaborative FCM scheme

Chin-Teng Lin,M. Prasad,Jyh-Yeong Chang

DOI: https://doi.org/10.1109/IFUZZY.2013.6825450

2013-12-01

Abstract:This paper presents a new approach for generating fuzzy rules for fuzzy inference system by using collaborative fuzzy c-mean (CFCM). In order to do any mode of integration between datasets, there is a need to define the common feature between datasets by using some kind of collaborative process and also need to preserve the privacy and security at higher levels. This collaboration process gives a common structure between datasets which helps to define an appropriate number of rules for structural learning and also improve the accuracy of the system modeling. This all consideration bring the concept of collaborative fuzzy rule generation process with a quality measuring.
Micropatterning Biomacromolecules on Aldehyde-Enriched Polyester Surfaces by a Microtransfer Technique

Jie Feng,Changyou Gao,Jiacong Shen

DOI: https://doi.org/10.1021/cm034608t

IF: 10.508

2004-01-01

Chemistry of Materials

Abstract:A modified microtransfer technique was introduced to create micropatterns of biomacromolecules on activated polyester surfaces. Briefly, a recessed poly(dimethylsiloxane) stamp was first coated with a biomacromolecule solution. After drying the solution and selectively removing the biomacromolecules on the ridges, the stamp was stored at low temperature and high humidity to form a condensed water layer. The stamp was subsequently pressed onto the activated polyester surfaces to yield the biomacromolecular patterns. The notable feature of this method is that the reaction between the biomacromolecules and the polymer surface could be performed at a comparable speed to that in solution. Using this method, albumin and chitosan were micropatterned onto aldehyde-enriched polycaprolactone or poly(L-lactic acid) surfaces. Observations under confocal laser scanning microscopy confirmed that the albumin or chitosan patterns formed by this microtransfer technique had higher contrast and good stability. The amount of water condensed on the stamp surface had significant influence on the quality of the resultant patterns. Deficient water produced rimming patterns, while excessive water caused the contamination of the patterns because of the overflow of the condensed water. This technique will be especially useful to those systems with lower reaction activity in the absence of solvent and hence can be applied widely to create patterns of biomacromolecules on polymer surfaces.
Anti-fouling Surfaces by Combined Molecular Self-Assembly and Surface-Initiated ATRP for Micropatterning Active Proteins.

K. M. Xiu,Q. Cai,J. S. Li,X. P. Yang,W. T. Yang,F. J. Xu

DOI: https://doi.org/10.1016/j.colsurfb.2011.10.023

IF: 5.999

2011-01-01

Colloids and Surfaces B Biointerfaces

Abstract:A simple method by combined molecular self assembly and surface-initiated atom transfer radical polymerization (SI-ATRP) was proposed to prepare a biologically inert surface for micropatterning active proteins. The MPEG microdomains having a short terminal poly(ethylene glycol) (PEG) unit were prepared by self assembly of 2-(methyoxy(polyethylenoxy) propyl)trimethoxy silane (MPEG-silane). The remaining local regions or poly(poly(ethylene glycol)methyl ether methacrylate-co-glycidyl methacrylate) (P(PEGMEMA-co-GMA)) microdomains were produced via SI-ATRP of PEGMEMA and GMA comonomers. The epoxy groups of the P(PEGMEMA-co-GMA) microdomains were used directly for covalent coupling of an active protein (human immunoglobulin or IgG) via the ring-opening reaction to produce the IgG-coupled microdomains. The IgG-coupled microdomains interact only and specifically with target anti-IgG, while the other antifouling microregions from self-assembled monolayers with short terminal PEG units effectively prevent specific and non-specific protein fouling. When extended to other active biomolecules, microarrays for specific and non-specific analyte interactions with a high signal-to-noise ratio could be readily tailored.
"Click" Patterning of Self-Assembled Monolayers on Hydrogen-Terminated Silicon Surfaces and Their Characterization Using Light-Addressable Potentiometric Sensors.

S. Krause,Jian Wang,M. Watkinson,Jingyuan Zhu,Fan Wu

DOI: https://doi.org/10.1021/acs.langmuir.5b02069

IF: 3.9

2015-08-25

Langmuir

Abstract:Two potential strategies for chemically patterning alkyne-terminated self-assembled monolayers (SAMs) on oxide-free silicon or silicon-on-sapphire (SOS) substrates were investigated and compared. The patterned surfaces were validated using a light-addressable potentiometric sensor (LAPS) for the first time. The first strategy involved an integration of photolithography with "click" chemistry. Detailed surface characterization (i.e. water contact angle, ellipsometry, AFM, and XPS) and LAPS measurements showed that photoresist processing not only decreases the coverage of organic monolayers but also introduces chemically bonded contaminants on the surfaces, thus significantly reducing the quality of the SAMs and the utility of "click" surface modification. The formation of chemical contaminants in photolithography was also observed on carboxylic acid- and alkyl-terminated monolayers using LAPS. In contrast, a second approach combined microcontact printing (μCP) with "click" chemistry; that is azide (azido-oligo(ethylene glycol) (OEG)-NH2) inks were printed on alkyne-terminated SAMs on silicon or SOS through PDMS stamps. The surface characterization results for the sample printed with a flat featureless PDMS stamp demonstrated a nondestructive and efficient method of μCP to perform "click" reactions on alkyne-terminated, oxide-free silicon surfaces for the first time. For the sample printed with a featured PDMS stamp, LAPS imaging showed a good agreement with the pattern of the PDMS stamp, indicating the successful chemical patterning on non-oxidized silicon and SOS substrates and the capability of LAPS to image the molecular patterns with high sensitivity.

Chemistry,Engineering,Medicine,Materials Science
Patterning Silicon Surfaces with Covalently Attached Dna at Sub-Micrometer Resolution

JH Ouyang,XS Zhao

DOI: https://doi.org/10.1117/12.570195

2004-01-01

Abstract:A procedure is developed to modify silicon surface by organic monolayer films with designed micrometer patterns of different chemical functionalities, which is based on the photolithography and photoactivated reaction of alkenes with Si-H on the hydrogen-terminated silicon surface. Subsequent chemical modification of the micro-pattern can be devised. As an illustration, DNA probe arrays are formed with the spatial resolution limited only by the current photolithography technology. The hybridization of the patterned probes with complementary targets is demonstrated through fluorescence detection. This method is applicable to high throughput biochips.
Uv-Induced Grafting Processes With In Situ Formed Photomask For Micropatterning Of Two-Component Biomolecules

S. C. Tang,J. Y. Xie,Z. H. Huang,F. J. Xu,Wantai Yang

DOI: https://doi.org/10.1021/la100344f

IF: 3.9

2010-01-01

Langmuir

Abstract:We report a photolithographic process for micropatterning of two-component biomolecules on a transparent organic film via lateral functional polymer brushes of poly(sodium acrylate) (P(AA)) and poly(glycidyl methacrylate) (P(GMA)). The pattern of binary polymer brushes were prepared via consecutive UV-initiated grafting processes, under the assistance of the in situ formed poly (4,41'-bi[N-(4-vinylbenzyl) pyridiniuml) (P(BVV)) photomask. The epoxy groups of the P(GMA) microdomains can be aminated for covalently coupling biotin, while the P(AA) microdomains were used for immobilizing immunoglobulin (IgG). The resulting biotin- and IgG-coupled microdomains interact specifically with their corresponding target proteins, avichn and anti-IgG, respectively.
A Simple Method to Fabricate A Conductive Polymer Micropattern on an Organic Polymer Substrate

P Yang,JY Xie,WT Yang

DOI: https://doi.org/10.1002/marc.200500759

IF: 5.006

2006-01-01

Macromolecular Rapid Communications

Abstract:Under UV irradiation Plus a photomask, a hydrophilic/hydrophobic hybrid polymer surface is created by sandwiching an ammonium persulfate solution between two polymer films. It is demonstrated that an effective conductive PANT micropattern can be fabricated on such a wettability patterned Surface. For PET, a stable negative micropattern could be formed directly by the selective deposition of PANT onto the hydrophobic region. Alternatively, for PP or PI, direct deposition of PANT is non-selective, however, the PANT layer remains preferentially on the hydrophilic region by peeling off the PANT layer on the hydrophobic region to form a positive micropattern.
A Wetting‐Enabled‐Transfer (WET) Strategy for Precise Surface Patterning of Organohydrogels

Xizi Wan,Xuetao Xu,Xi Liu,Lanxin Jia,Xiao He,Shutao Wang

DOI: https://doi.org/10.1002/adma.202008557

IF: 29.4

2021-03-12

Advanced Materials

Abstract:The ability to manipulate water and oil phases in a designable manner is of great significance in widespread fields from art paintings to materials science. However, achieving precise and stable surface patterns for two immiscible phases of water and oil remains a challenge. Herein, a general wetting-enabled-transfer (WET) strategy is reported to construct discretionary shape-defined surface patterns of organohydrogels along with their monolithic formation either from flat to curved surfaces or from the microscale to the macroscale. Locally differentiated wettability induces hydrophilic monomers and hydrophobic monomers from an emulsion system onto the wettability-matching regions of the prepatterned substrates, subsequently forming corresponding hydrogel and organogel patterns on the organohydrogel surface after in situ photopolymerization. The precision of the surface patterns can be controlled by optimizing the gel monomers, emulsion droplet size, and surface chemical composition of the prepatterned substrates. This finding may provide a feasible strategy for precisely patterning functional materials from two-immiscible-phase systems.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Polymer blend lithography: A versatile method to fabricate nanopatterned self-assembled monolayers

Cheng Huang,Markus Moosmann,Jiehong Jin,Tobias Heiler,Stefan Walheim,Thomas Schimmel

DOI: https://doi.org/10.3762/bjnano.3.71

IF: 3.1

2012-09-04

Beilstein Journal of Nanotechnology

Abstract:A rapid and cost-effective lithographic method, polymer blend lithography (PBL), is reported to produce patterned self-assembled monolayers (SAM) on solid substrates featuring two or three different chemical functionalities. For the pattern generation we use the phase separation of two immiscible polymers in a blend solution during a spin-coating process. By controlling the spin-coating parameters and conditions, including the ambient atmosphere (humidity), the molar mass of the polystyrene (PS) and poly(methyl methacrylate) (PMMA), and the mass ratio between the two polymers in the blend solution, the formation of a purely lateral morphology (PS islands standing on the substrate while isolated in the PMMA matrix) can be reproducibly induced. Either of the formed phases (PS or PMMA) can be selectively dissolved afterwards, and the remaining phase can be used as a lift-off mask for the formation of a nanopatterned functional silane monolayer. This “monolayer copy” of the polymer phase morphology has a topographic contrast of about 1.3 nm. A demonstration of tuning of the PS island diameter is given by changing the molar mass of PS. Moreover, polymer blend lithography can provide the possibility of fabricating a surface with three different chemical components: This is demonstrated by inducing breath figures (evaporated condensed entity) at higher humidity during the spin-coating process. Here we demonstrate the formation of a lateral pattern consisting of regions covered with 1 H ,1 H ,2 H ,2 H -perfluorodecyltrichlorosilane (FDTS) and (3-aminopropyl)triethoxysilane (APTES), and at the same time featuring regions of bare SiO x . The patterning process could be applied even on meter-sized substrates with various functional SAM molecules, making this process suitable for the rapid preparation of quasi two-dimensional nanopatterned functional substrates, e.g., for the template-controlled growth of ZnO nanostructures Bauermann, L. P.; Gerstel, P.; Bill, J.; Walheim, S.; Huang, C.; Pfeifer, J.; Schimmel, T. Langmuir 2010, 26, 3774–3778. doi:10.1021/la903636k.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology

Digoxin radioimmunoassay: Capabilities and limitations

Chemical Modification on Top of Nanotopography to Enhance Surface Properties of PDMS

One-step photochemical introduction of nanopatterned protein-binding functionalities to oligo(ethylene glycol)-terminated self-assembled monolayers.

Mesoscale Protein Patterning on a Self-Assembled Monolayer Coated Silicon Surface Through Nanosphere Lithography

A New Method to Pattern Silicon Surface with Chemical Functional Groups

Direct patterning using protein-based water lithography

Pulmonary arteriosclerosis produced by hyperoxemic normotensive perfusion.

An Extremely Simple and Effective Strategy to Tailor the Surface Performance of Inorganic Substrates by Two New Photochemical Reactions

Preparation and Photolithography of Self-Assembled Monolayers of 10-Mercaptodecanylphosphonic Acid on Glass Mediated by Zirconium for Protein Patterning.

A method for fabricating protein patterns on the octadecyltrichlorosialne(OTS) surface through paper swabbing.

Method for fabrication of paper-based microfluidic devices by alkylsilane self-assembling and UV/O3-patterning.

Highly Tunable Complementary Micro/Submicro-Nanopatterned Surfaces Combining Block Copolymer Self-Assembly and Colloidal Lithography.

Designing mamdani type fuzzy rule using a collaborative FCM scheme

Micropatterning Biomacromolecules on Aldehyde-Enriched Polyester Surfaces by a Microtransfer Technique

Anti-fouling Surfaces by Combined Molecular Self-Assembly and Surface-Initiated ATRP for Micropatterning Active Proteins.

"Click" Patterning of Self-Assembled Monolayers on Hydrogen-Terminated Silicon Surfaces and Their Characterization Using Light-Addressable Potentiometric Sensors.

Patterning Silicon Surfaces with Covalently Attached Dna at Sub-Micrometer Resolution

Uv-Induced Grafting Processes With In Situ Formed Photomask For Micropatterning Of Two-Component Biomolecules

A Simple Method to Fabricate A Conductive Polymer Micropattern on an Organic Polymer Substrate

A Wetting‐Enabled‐Transfer (WET) Strategy for Precise Surface Patterning of Organohydrogels

Polymer blend lithography: A versatile method to fabricate nanopatterned self-assembled monolayers