Abstract:This paper discusses the pulse signal of a highly sensitive lateral deformable optical microelectromechanical systems (MEMS) displacement sensor based on Wood's anomalies and its corresponding tolerance. The optical reflection amplitude of the device changes with the displacement of the nanostructured grating elements. Unexpectedly, the device's original sinusoidal signal develops into a new signal form (i.e., a pulse signal), when the air gap between the two layers of gratings decreases. Since the slope of the pulse signal, namely 2.5%/nm (i.e., 0.65 dB/nm), is eight times higher than that of the original signal form, namely 0.3%/ nm (i.e., 0.03 dB/nm), the sensitivity of the structure improves by eight times. However, this device is very sensitive to parameters such as its wavelength, period, duty ratio, and air gap. In this paper we used rigorous coupled wavelength analysis (RCWA) to analyze and optimize the respective influence of each parameter on the device's performance. We have introduced two methods to search for the optimal setting and have demonstrated the optimal settings of different incident lights. The simulation results indicate that it is close to 85% possible to achieve an actual device with the highest slope superior to 0.5%/nm and it is 64% possible that the highest slope of an actual device falls in the interval ranging from 1.0%/nm to 2.0%/nm. All the simulated data helped us better understand the tolerance of the pulse signal and guide us toward the development of an actual device. (C) 2015 Optical Society of America

Double Resonant Vertically Accessed Optical Waveguide Sensor

Visible/Near IR Double Wave Band Sensor Based on Vertically Stacked Structure

Optical Waveguide Double-Ring Sensor Using Intensity Interrogation with a Low-Cost Broadband Source

Highly Sensitive Lateral Deformable Optical MEMS Displacement Sensor: Anomalous Diffraction Studied by Rigorous Coupled-Wave Analysis.

Experimental Investigation of Waveguide Sensor Based on Cascaded-Microring Resonators with Vernier Effect

Highly-sensitive Optical Waveguide Sensor Based on SiON Using Two Cascaded-Microring Resonators

An Integrated Optical Sensor Based on Cascaded Polarization Convertor and Slot Waveguide Microring Resonator

Silicon Nanowire Waveguide Sensor Based on Two Cascaded Ring Resonators

Novel SPR Sensor Based on MIM-based Waveguide and an Asymmetric Cross-shaped Resonator

Optical Waveguide Sensors Based On Vernier Effect

Intensity Interrogated Planar Waveguide Biosensors

Temperature-insensitive Waveguide Sensor Using a Ring Cascaded with a Mach-Zehnder Interferometer

Quasi-linear response of an integrated optical waveguide sensor by a double output readout method

High FOM Fano Resonance Refractive-Index Sensor Based on a Baffled MIM Waveguide Coupled with an Inverted L-Shaped Resonator

High-Performance Microcavity Optical Sensor Connected With A Waveguide

Subwavelength Grating Double Slot Waveguide Racetrack Ring Resonator for Refractive Index Sensing Application

Flexible High-Resolution Wavefront Sensor Using a Double-Frequency Two-Dimensional Acousto-Optic Modulator

Dual Waveguide Coupled Microring Resonator Sensor Based on Intensity Detection

Analysis and Design of Refractive Index Sensor Based on Waveguide Coupling

Extraordinary evanescent field confinement waveguide sensor for mid-infrared trace gas spectroscopy

Oscillating wave displacement sensor using the enhanced Goos-Hänchen effect in a symmetrical metal-cladding optical waveguide.