Abstract:SPIDER, an RF-driven negative ion source in the Neutral Beam Test Facility (NBTF), serves as the prototype for ITER's neutral beam injector (NBI). It is composed of 8 drivers powered by 4 RF generators, aiming to accelerate 50 A of negative hydrogen ions to 100 KeV with a beam uniformity target of 10%. The experiment, launched in 2018, tested negative ion production using caesium. Results match those of similar facilities, but SPIDER faces challenges due to its size, multiple drivers, and non-uniform plasma expansion. These issues impact beam uniformity, preventing the machine from reaching expected performance. To address this, SPIDER initiated a significant shutdown at the end of 2021 for improvements. One the most important aspects studied during the first experimental campaign is source uniformity, addressed both in terms of plasma and of caesium distribution. The latter is particularly relevant since its quality is directly related to the beam uniformity and divergence. To have more insight about these issues, monitoring the plasma properties in the extraction region is crucial, hence in the present contribution, the design and development of two new diagnostic systems are described: a movable Langmuir probe and a Retarding Field Energy Analyser (RFEA). The first can provide a vertical scan of the main plasma parameters close to the plasma grid. The spatial resolution would improve with respect to the already installed set of fixed Langmuir probes embedded in the grid system, and the newly installed diagnostic could interact with other sensors to produce complementary measurements (namely, electron photo-detachment). The latter, instead, allows the monitoring of the positive ion energy distribution: positive ions, in fact, can be precursors of the negative ones produced at the caesiated surface, but also influence the energy of negative ion and their extraction probability and thus collecting information about their energy distribution allows inferring details about the extracted negative ion beam. The two diagnostics are designed focusing on the experimental constraint of integrating the diagnostics in a harsh and complex environment such as SPIDER plasma: a preliminary study of the placement inside the source is carried out, then the electrode of the movable probe and the RFEA sensor are sized according to the spatial and energy resolution requested by the system.

Damage assessment of the Faraday Shield in the RF driver of the negative ion source test stand SPIDER

Faraday shield dissipation in the drivers of SPIDER based on electromagnetic 3D calculations

Overview on electrical issues faced during the SPIDER experimental campaigns

Study and development of diagnostic systems to characterise the extraction region in SPIDER

Three-dimensional calculations of the inductive coupling between radio-frequency waves and plasma in the drivers of the SPIDER device

2D electromagnetic simulations of RF heating via inductive coupling in the SPIDER device

Numerical Analyses of Electromagnetic Forces on the ITER Blanket Module Shield Block During Major Disruptions

The Transmission Line for the SPIDER Experiment: From design to installation

First operations with caesium of the negative ion source SPIDER

Lessons learned after three years of SPIDER operation and the first MITICA integrated tests

Characterization of plasmas in negative ion sources using a Cs-H Collisional Radiative model

Design and preliminary operation of a laser absorption diagnostic for the SPIDER RF source

Nuclear analysis and shielding optimisation in support of the ITER In-Vessel Viewing System design

Spider Ion Source and Extraction Power Supplies -- An update of the design after four years of operation

Integration studies of RF solid-state generators in the electrical system of NBTF experiments and ITER HNB

Development and first operation of a Cavity Ring Down Spectroscopy diagnostic in the negative ion source SPIDER

Plasma discharge experiments of a Faraday shieldless driver for high-power and long-pulse radio frequency ion source for NBI application

Engineering design and manufacturing of a radio frequency plasma driver without Faraday shield for NBI application

Summary of caesium evaporation and deposition during SPIDER first campaign

Progress in the ITER neutral beam test facility

Characterization of Cs-free negative ion production in the ion source SPIDER by Cavity Ring-Down Spectroscopy