Abstract:The crystallization of glass through conventional thermal annealing in a furnace is a well-understood process. However, crystallization by femtosecond (fs) laser brings another dimension to this process. The pulsed nature of the irradiation necessitates a reevaluation of the parameters for optimal crystallization and an understanding of the particularities of using fs laser. This includes adjusting the laser pulse energy, the repetition rate, and the writing speed to either initiate nucleation or achieve substantial crystal growth. Therefore, a key challenge of this work is to establish reliable calculations for understanding the link between the size of the crystallized region and an ongoing transition (e.g., solid-to-solid, liquid-to-solid), while accounting for the aforementioned laser parameters. In this context, and based on previous work, a temperature distribution (in space and time) is simulated to model the thermal treatment at any point in the glass. By setting the condition that the temperatures are between the glass transition and melting temperature, the simulated crystallized region size can be compared with experimental observations. For that purpose, knowledge of the beam width at the focal point and of the absorbed beam energy fraction are critical inputs that were extracted from experiments found in the literature. After that, the management of the crystallization process and the width of the crystallization line can be achieved according to pulse energy, e.g., crystallite size, and also the effect of the scanning speed can be understood. Among the main conclusions to highlight, we disclose the laser conditions that determine the extent of the crystallized area and deduce that it is never of interest to increase the pulse energy too much as opposed to the repetition rate for the uniform crystallized line.

Laser-induced crystallization of copper oxide thin films: A comparison made between Gaussian and chevron-beam profiles provides a clue for the failure of Gaussian-beam profile

Crystallization of Cuprous Oxide Thin Films by Continuous-Wave Laser Diode with Micro-Chevron Laser Beam (μ-CLB)

How to Crystallize Glass with a Femtosecond Laser

Femtosecond Laser-Induced Phase Transformations In Amorphous Cu77ni6sn10p7 Alloy

Molecular Dynamics Simulation of Two-Phase Structures of Copper Formed by Laser Grooving

Analysis and optimization of Czochralski laser oxide crystal growth

Anisotropic crystallization in solution processed chalcogenide thin film by linearly polarized laser

Morphology Control by Pulsed Laser in Chemical Deposition Illustrated in ZnO Crystal Growth

Microstructure Evolution of Cu-Mn Alloy under Laser Rapid Solidification Conditions

RECRYSTALLIZATION TEXTURE IN COPPER HEATED BY LASER BEAM AND DISCUSSION ON ITS MECHANISM

Direct pulsed laser crystallization of nanocrystals for absorbent layers in photovoltaics: Multiphysics simulation and experiment

Spontaneous atomic crystallization via diffractive dephasing in optical cavities

Crystallization of Liquid Cu Nanodroplets on Single Crystal Cu Substrates Prefers Closest-Packed Planes Regardless of the Substrate Orientations

Modeling nonisothermal laser amorphization: a multicomponent alloy perspective

Influence of Crystallite Size and Impurity Density on the Grain Structure Evolution of Electroplated Copper Films During Thermal and Laser Annealing

Evaluation of microscale crystallinity modification induced by laser writing on Mn3O4 thin films

An Explanation of the Crystallization of Amorphous Ge2sb2te5 Films Induced by A Short Gaussian Laser Pulse

Studies of the Influence of Beam Profile and Cooling Conditions on the Laser Deposition of a Directionally-Solidified Superalloy

Influence of ionization and cumulative effects on laser-induced crystallization in multilayer dielectrics

Laser Induced Crystallization of As-Deposited Amorphous Ge2Sb2Te5 Films

Crystallization Behavior Upon Heating and Cooling in Cu50Zr50 Metallic Glass Thin Films