Abstract:To achieve high-quality chemical vapor deposition of monolayer graphene electrodes (CVD-MG), appropriate characterization at each fabrication step is essential. In this article, (1) Raman spectroscopy/microscopy are employed to unravel the contact effect between the CVD-MG and Cu foil in suspended/supported formation. (2) The Surface-Enhanced Raman spectroscopy (SERS) system is described, unveiling the presence of a z-directional radial breathing-like mode (RBLM) around 150 cm−1, which matches the Raman shift of the radial breathing mode (RBM) from single-walled carbon nanotubes (SWCNTs) around 150 cm−1. This result indicates the CVD-MG located between the Au NPs and Au film is not flat but comprises heterogeneous protrusions of some domains along the z-axis. Consequently, the degree of carrier mobility can be influenced, as the protruding domains result in lower carrier mobility due to flexural phonon–electron scattering. A strongly enhanced G-peak domain, ascribed to the presence of scrolled graphene nanoribbons (sGNRs), was observed, and there remains the possibility for the fabrication of sGNRs as sources of open bandgap devices. (3) Electrostatic force microscopy (EFM) is used for the measurement of surface charge distribution of graphene at the nanoscale and is crucial in substantiating the electrical performance of CVD-MG, which was influenced by the surface structure of the Cu foil. The ripple (RP) structures were determined using EFM correlated with Raman spectroscopy, exhibiting a higher tapping amplitude which was observed with structurally stable and hydrophobic RPs with a threading type than surrounding RPs. (4) To reduce the RP density and height, a plausible fabrication could be developed that controls the electrical properties of the CVD-MG by tuning the cooling rate.

Colorimetry Technique for Scalable Characterization of Suspended Graphene

Very large scale characterization of graphene mechanical devices using a colorimetry technique

Electromechanical Properties of Graphene Drumheads

Non-invasive Scanning Raman Spectroscopy and Tomography for Graphene Membrane Characterization

Centimeter-scale high-resolution metrology of entire CVD-grown graphene sheets.

Spectroscopic Metrics Allow in Situ Measurement of Mean Size and Thickness of Liquid-Exfoliated Few-Layer Graphene Nanosheets

High-Yield Large-Scale Suspended Graphene Membranes over Closed Cavities for Sensor Applications

Rapid Large-Scale Characterization of CVD Graphene Layers on Glass Using Fluorescence Quenching Microscopy

Suspension and Measurement of Graphene and Bi2Se3 Atomic Membranes

Nano-Physical Characterization of Chemical Vapor Deposition-Grown Monolayer Graphene for High Performance Electrode: Raman, Surface-Enhanced Raman Spectroscopy, and Electrostatic Force Microscopy Studies

Suspension and Measurement of Graphene and Bi2Se3 Thin Crystals.

Monitoring electrostatically-induced deflection, strain and doping in suspended graphene using Raman spectroscopy

Step-by-step Monitoring of CVD-graphene During Wet Transfer by Raman Spectroscopy

Strain analysis of plasma CVD graphene for roll-to-roll production by scanning transmission electron microscopy and Raman spectroscopy

ISCOPEM2D V1.0: An In‐Situ Method to Characterize and Compare CVD Graphene Films using Quality Matrix Approaches

Stress and charge transfer in uniaxially strained CVD graphene

Transport in Suspended Monolayer and Bilayer Graphene Under Strain: A New Platform for Material Studies

Optical Separation of Mechanical Strain from Charge Doping in Graphene

Non-destructive and Rapid Evaluation of CVD Graphene by Dark Field Optical Microscopy

Reliable lift-off patterning of graphene dispersions for humidity sensors