Abstract:The SO2/NOX pollution in the flue gas of non-ferrous smelting is increasingly serious. At the same time, the accumulation of red mud (RM) in the aluminum industry and phosphorus sludge (PS) in the yellow phosphorus industry has caused serious harm to the environment. To remove SO2 and NOX from the non-ferrous smelting flue gas and realize the resource utilization of the above two solid wastes, an ultrasonic field was used in this study to strengthen the PS excited O3 process and RM wet desulfurization and denitrification process. In the process of O3 excitation, the response surface method (RSM) is used to obtain the optimal O3 excitation concentration, and the optimal reaction conditions are designed based on the response surface optimization model: T is 53.226 °C, power density is 0.4 W/cm2, PS concentration is 51.433 g/L, O3 formation concentration up to 250 ppm or more, which provides a theoretical basis for subsequent desulfurization and denitrification steps. It is proved that this study can replace the expensive traditional O3 generator and provide a basis for NOX removal in the following process. In addition, the optimum experimental conditions of ultrasonic enhanced RM desulfurization and denitrification process were also explored. Under ultrasonic frequency of 28 kHz, ultrasonic power density of 0.4 W/cm2, T of 50 °C, RM concentration of 15 g/L, and stirring intensity of 1000 rpm, the desulfurization efficiency of the reaction system can be maintained above 95 % within 250 min, and the denitrification efficiency can be maintained above 90 % within 250 min. The effect of desulfurization and denitrification in this study is much better than that of traditional methods. Finally, the reaction mechanism of ultrasonic enhanced O3 excitation and RM wet desulfurization and nitrogen removal was discussed by combining adsorption thermodynamics, isotherm, and kinetics. The results showed that the OH· free radicals generated by ultrasonic cavitation and the physical effects brought by emulsification had significant promoting effects.

Reaction Mechanism of Simultaneous Removal of H2S and PH3 Using Modified Manganese Slag Slurry

Preparation of Modified Manganese Slag Slurry for Removal of Hydrogen Sulphide and Phosphine

Reconfiguration of Acid Gas Removal Process Matching the Integration of Coal Chemical Industry with Green Hydrogen

Preparation of Calcium Sulfide by Sludge‐assisted Rice Husk Reduction of Phosphogypsum

Elution of Hg-containing Substances from CeO2-MnO2/TiO2 Adsorbent in H2S Atmosphere by CuCl2 Solution

The removal of copper and zinc from swine wastewater by anaerobic biological-chemical process: Performance and mechanism

Production of H2S with a Novel Short-Process for the Removal of Heavy Metals in Acidic Effluents from Smelting Flue-Gas Scrubbing Systems

Efficient removal of As, Cu and Cd and synthesis of photo-catalyst from Cu-smelting waste acid through sulfide precipitation by biogenic gaseous H2S produced by anaerobic membrane bioreactor

[Inhibition of Sulfite Oxidation Catalyzed by Heavy Metals in Dual Alkali Flue Gas Desulfurization Slurry].

Electrochemically enhanced liquid-phase catalysis for simultaneous purification of phosphine, hydrogen sulfide and hydrogen cyanide: Interactions and synergistic mechanisms

Ultrasonic-enhanced Phosphorus Sludge Excited O3 Coupled Red Mud Simultaneous Desulfurization and Denitrification

Novel technology for hydrogen sulfide purification via the slurry prepared from roasted vanadium steel slag

Experimental and mechanistic study on the removal of lead from solution by sulfuric acid modified steel slag adsorbent

Simultaneous removal of As(III) and Cu(II) from real bottom ash leachates by manganese-oxidizing aerobic granular sludge: Performance and mechanisms

Simultaneous removal of hydrogen sulfide and ammonia in the gas phase: a review

Adsorption and partial catalytic oxidation of hydrogen sulfide to elemental sulfur using facilely prepared materials derived from sludge of groundwater treatment

The recycling of sulphur in waste and conversion to manganese sulphate: Process optimization, kinetic study, mechanistic insights

Synchronous stabilization of Pb, Zn, Cd, and As in lead smelting slag by industrial solid waste

Cu/ACF adsorbent modified by non-thermal plasma for simultaneous adsorption–oxidation of H2S and PH3

Concurrent removal of Fe(II), Cu(II), and Zn(II) cations from acid mine drainage by an industrial solid waste - Steel slag: Behaviors and mechanisms

The Fate of Heavy Metals and Risk Assessment of Heavy Metal in Pyrolysis Coupling with Acid Washing Treatment for Sewage Sludge