Abstract:Introduction . During the construction of modern highways, much attention is paid to compaction of bases consisting of natural soils. They require the use of special equipment, including self-propelled machines, performing compaction in a continuous cycle. But when designing it, certain difficulties arise in determining the parameters of impact accelerators and the mass of the impact plate. The purpose of the work is to study the influence of the parameters of working equipment on the process of soil deformation. Materials and methods . To check the influence of the parameters of the tamper equipment on the compaction process, a method of mathematical modeling of the process using rheological models was chosen. The working cycle of impact ramming is divided into four phases. A mathematical description of the movement of the stamp and soil in each of the phases of movement is given. The change in the stress condition in time in the body of the soil half-space is considered. Results .Тhe time dependence of the soil stress condition was obtained for different stiffnesses of the spring impact accelerator and the change in the stamp mass. A joint analysis of the obtained dependencies showed that when designing impact equipment intended for compaction of naturally occurring soils, it requires matching the peak stresses from the mass of the stamp and the stiffness of the impact accelerators. This will make it possible to stretch the action of stresses in time, to form a compacted core in the soil half-space quickly and require a smaller number of strokes on one track to obtain the required material density. Discussion and conclusion . The proposed model of tamper equipment made it possible to consider the processes occurring in the soil half-space, to obtain comparative characteristics of the stamp mass and the rigidity of impact accelerators. The obtained data correlate well with the data of other authors. The results of the study may be useful to engineers involved in the development of new techniques of intensifying action. Financial transparency: the authors have no financial interest in the presented materials or methods. There is no conflict of interest.

The stability stroke of cotton seeder moulder

Study Of Strength Characteristics Of Stabilized Soil By Using Stabilizing Agent Gx08 Treating Marine And Lacustrine Soft Soil In Hangzhou

STABILITY ANALYSIS OF TUNNEL WORKING FACE IN COMPOSITED SANDY SOIL

Optimization of Formula for Stabilizing Muddy Soil Using Response Surface Methodology

Design Research on Roller of New Fiber Carding Machine

Fundamental Mechanical Behavior of CMMOSC-S-C Composite Stabilized Marine Soft Clay

Comb Former Parameters for a Cotton Seeder

A study on the stability bearing capacity of fastener-style tubular steel formwork-supports

Change of Structure of Dispersion Material Under Dynamic Loads

Study of Mechanics Behavior and Constitutive Model of Cemented Soil under Static Triaxial Tests

Field investigation on the effect of the tamping machine and dynamic track stabilizer on changing the rail support modulus

Stability Study of Flood-control Embankment

Stability of composite foundation improved by rigid piles under embankment considering different failure modes of piles

ANALYSIS OF STABILITY FAILURE FOR PIPELINE DURING LONG DISTANCE PIPE JACKING

Investigation on the resilient modulus of soil mixture at various water contents and coarse grain contents under train moving loads

SIMULATION OF IMPACT PROCESS OF SOIL COMPACTION

Evaluation, calibration, and modal analysis for determination of contact stiffness between workpiece and components of milling fixture

Analysis on Interference Mechanism of Structural and Systematic Factors Interfering with the Mechanical Stability

Morphology validation on strength properties of black cotton soil stabilized with rice husk ash and carbide lime in the presence of sulphate

Determination of calculating stresses on the depth of loess grounds of hydraulic structures

Particle Motion and Stress Response Interacted with Machine Activity: Railroad Tamping Strategy