Abstract:With increasing train speed and wheel axle load, severe vibrations can occur in a ballasted trackbed, thereby accelerating the degradation of the ballast particles and ultimately causing excessive settlement. To gain insights into the long-term trackbed behavior and the ballast degradation evolution, a full-scale ballasted track experiment with eight sleepers was designed and tested on a validated physical model test platform (ZJU-iHSRT). Sieving analysis together with computer-aided ballast morphology analysis were adopted to quantify the ballast degradation in terms of both the ballast particle size and morphological evolution, after every 100,000 train carriages. Various sensors were installed at key locations in the trackbed to record the dynamic stress responses, vibration velocities and deformations under train moving loads for up to 500,000 train carriages in total. The movements of individual particles inside the ballast layer were also captured using "SmartRock " wireless sensors. The dynamic soil stresses and vibration velocities in the trackbed all peaked at the locations underneath the rail seat and decayed with the distance away from the rail seat. Severe ballast degradation occurred in both particle sizes and morphological properties, with the ballast particles in the middle zone under the sleeper suffering a greater breakage due to the stronger confinement. The long-term train loads densified the ballast layer, both through particle rearrangement and particle breakage filling the voids in the ballast bed, resulting in a reduction in the stresses and vibrations. The amplitudes of the vertical stresses and the vibration velocities in the trackbed around the rail seat were reduced by over 25% and 38% respectively after 500,000 train loading carriages. The ballast particle shape became more compact after the test, with larger diameter and more Platy, Bladed and Elongate shapes found to be the more likely to degrade. Over 50% of the permanent settlement of the ballasted trackbed resulted from the ballast layer deformation, and the increase in the train speed intensified particle movements away from the sleeper in the lateral and longitudinal directions in the ballast layer and accelerated the development of the accumulated settlement, while the increase in the axle load caused the ballast breakage index (BBI) to rise dramatically by over 50% and contributed significantly to a greater settlement.

Field investigation on the effect of the tamping machine and dynamic track stabilizer on changing the rail support modulus

Dynamic Responses of Ballastless High-Speed Railway Due to Train Passage with Excitation of Uneven Trackbed Settlement

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Dynamic stability model and analysis of mechanical properties for railway operations

Vibration Characteristics and Mesoscopic State Evolution of Ballasted Track During Dynamic Stabilizing Operation

Effect of unsupported sleepers on dynamic behavior of running vehicles and ride comfort index

Investigating the impact of tamping on ballast bed in railway turnout areas: Insights from discrete element method analysis of energy evolution

Effect of Rail Rigidity on Track-Ground Vibration Due to a High-Speed Train

Mechanical behavior and performance evolution of railway ballast track under dynamic stabiliser based on the hybrid MBD-DEM simulation

Particle Motion and Stress Response Interacted with Machine Activity: Railroad Tamping Strategy

The Effect of Unsupported Sleepers/Bearers on Dynamic Phenomena of a Railway Turnout System under Impact Loads

Mobilizing railway track stability with nonionic cement asphalt mortar for floating sleeper mitigation – 2D/3D numerical investigation and full-scale testing verification

Field assessment of different tamping operations for newly constructed or renovated railway tracks

Technical Note: Three-dimensional analyses of dynamic responses of track-ground system subjected to a moving train load

Numerical investigation on loading pattern of railway concrete slabs

Study on the Effects of Tamping Frequency to the Compaction Degree of Trackbeds

Damping Characteristics of Ballast Mat on the Rail Joint

The effect of Ballast Moisture Content and Fouling Index on Railway Track Settlement

Comparative experimental investigation of the vibration mitigation characteristics of ballasted track using the rubber composite sleeper and concrete sleeper under various interaction forces

Improved performance of ballasted tracks at transition zones: A review of experimental and modelling approaches

Trackbed Settlement and Associated Ballast Degradation Due to Repeated Train Moving Loads