Abstract:Hypothesis: Zirconia microparticles produced by sol-gel synthesis have great potential for photonic applications. To this end, identifying synthetic methods that yield reproducible control over size uniformity is important. Phase transformations during thermal cycling can disintegrate the particles. Therefore, understanding the parameters driving these transformations is essential for enabling high-temperature applications. Particle morphology is expected to influence particle processability and stability. Yttria-doping should improve the thermal stability of the particles, as it does in bulk zirconia. Experiments: Zirconia and YSZ particles were synthesized by improved sol-gel approaches using fatty acid stabilizers. The particles were heated to 1500 °C, and structural and morphological changes were monitored by SEM, ex situ XRD and high-energy in situ XRD. Findings: Zirconia particles (0.4-4.3 μm in diameter, 5-10% standard deviation) synthesized according to the modified sol-gel approaches yielded significantly improved monodispersities. As-synthesized amorphous particles transformed to the tetragonal phase at ∼450 °C with a volume decrease of up to ∼75% and then to monoclinic after heating from ∼650 to 850 °C. Submicron particles disintegrated at ∼850 °C and microparticles at ∼1200 °C due to grain growth. In situ XRD revealed that the transition from the amorphous to tetragonal phase was accompanied by relief in microstrain and the transition from tetragonal to monoclinic was correlated with the tetragonal grain size. Early crystallization and smaller initial grain sizes, which depend on the precursors used for particle synthesis, coincided with higher stability. Yttria-doping reduced grain growth, stabilized the tetragonal phase, and significantly improved the thermal stability of the particles.

Microstructure and synthesis mechanism of ScYSZ powders prepared by chemical co-precipitation with different dynamic microenvironment

Cubic Yttria Stabilized Zirconia Sintering Additive Impacts: A Comparative Study

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Synthesis of YSZ film by solid single source PE-MOCVD method and characterization

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Synthesis and high-temperature phase transformation behavior of Dy2O3–Sc2O3 co-stabilized ZrO2 powders prepared by cocurrent chemical coprecipitation

Synthesis of Scandia-Stabilized Zirconia Via Thermo-Decomposition of Precursor Complexes

Homogeneous Precipitation Synthesis and Electrical Properties of Scandia Stabilized Zirconia

Microstructure characterization and properties of YSZ particles doped tungsten alloy prepared by liquid phase method

Structural evolution and synthesis mechanism of ytterbium disilicate powders prepared by cocurrent chemical coprecipitation method

Co-Doping Effects of Y3+ and Sc3+ on the Crystal Structures, Nanoparticle Properties and Electrical Behavior of Zro2 Solid Solutions Prepared by A Mild Urea-Based Hydrothermal Method

Sc3+:Ce4+:Y3+ doped zirconia nanopowders (ScCeYSZ): Synthesis, thermal phase stability and hot corrosion behavior of spark plasma sintered body

Study of Factors Influencing the Microstructure and Phase Content of Ultrafine Y-Tzp

Preparations and Characterizations of New Mesoporous ZrO2 and Y2O3-stabilized ZrO2 Spherical Powders

Fabrication and microstructure evolution of 8 mol% yttria-stabilized zirconia (8YSZ) transparent ceramics from co-precipitated nanopowders

Structural evolution and phase transformation behaviors of 10 wt. % dysprosia stabilized zirconia ceramic powders

Tetragonal‐to‐Monoclinic Phase Transitions in Nanocrystalline Rare‐Earth‐Stabilized Zirconia Prepared by a Mild Hydrothermal Method

Synthesis and thermal stability of zirconia and yttria-stabilized zirconia microspheres

Phase, microstructure and property evolutions of reactively synthesized YSZ-ZrC composite coating based on the content regulation of the precursor

Effect of doping CeO2 and Sc2O3 on structure, thermal properties and sintering resistance of YSZ

Ethanol-induced formation of precursor for 8mol% Yttria-stabilized zirconia: Towards the production of well-dispersed, easily sintering, and high-conductivity nano-powders