Abstract:A series of Ti-Nb binary oxide were synthesized by co-precipitation as supports to prepare Cu/Ti-Nb mixed oxide catalysts through wetness impregnation. The novel catalyst 0.8%Cu/Ti2NbOx exhibited an excellent catalytic activity and N-2 selectivity with a broad operation temperature (250-425 degrees C) under a gas hourly space velocity (GHSV) of 177,000 h(-1) for the selective catalytic reduction of NOx with NH3. A series of analytical techniques including high resolution transmission electron microscopy (HRTEM), N-2-physisorption, X-ray diffraction (XRD), Laser Raman spectra (LRS), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), NH3 temperature-programmed desorption (NH3-TPD), H-2 temperature-programmed reduction (H-2-TPR) and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) were used to investigate the correlations among catalyst structure, surface properties and catalytic performance. For the support Ti2NbOx, the specific surface area was larger than that of TiO2, promoting the high dispersion of the active component. Also, the surface acid sites were increased by addition of niobium oxide species and the redox capability of the support was enhanced by doping copper species. Moreover, the introduction of copper species effectively enhanced the catalytic performance within 225-400 degrees C. The copper species mainly existed as isolated Cu2+ and non-isolated Cu2+ and the isolated Cue(2+) ions played a significant role in the high NH3-SCR performance over 0.8%Cu/Ti2NbOx catalyst. Hydrothermal aging treatment experiment demonstrated that 0.8%Cu/Ti2NbOx catalyst had an excellent hydrothermal stability. In addition, water vapor or/and SO2 had a slightly reversible inhibition influence on the catalytic performance over 0.8%Cu/Ti2NbOx, indicating that it was a promising candidate for NH3-SCR catalyst in the future practical application. The reaction pathway over 0.8%Cu/Ti2NbOx catalyst followed both Eley-Rideal mechanism and Langmuir-Hinshelwood mechanism at 225 degrees C. (C) 2017 Elsevier B.V. All rights reserved.

Boosting NO removal performance of selective catalytic reduction with NH3 on hydrotalcite derived NiCuFe mixed oxides synthesized via urea hydrothermal method

New Insights into the Relationships Between Performance and Physicochemical Properties of FeOx–NbOx Mixed Oxide Catalysts for the NH3-SCR Reactions

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Highly Efficient Fe-Cu/CL Catalysts Based on Low-Cost Clay Minerals for NH3-SCR of NOx at Low Temperature

Boosted Denitration Activity of Α-Fe2o3 for Low-Temperature NH3-SCR by Addition of Ce/Cu

Tunable Highly Dispersed Nia-xMnxAlOy Catalysts Derived from Layered Double Oxide for Low Temperature NOx Removal

The Superior Performance of Nb-modified Cu-Ce-Ti Mixed Oxides for the Selective Catalytic Reduction of NO with NH3 at Low Temperature

High-performance Fe-Cu composite oxide for selective catalytic reduction of NO with NH3: Driving of Cu on α-Fe2O3

Low temperature SCR denitration with NH3 by highly dispersed Ni–Cu Sites: An insight into surface acidity and redox ability

Promotional Synergistic Effect of Cu and Nb Doping on a Novel Cu/Ti-Nb Ternary Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3

[Reaction of NO with metal oxides and urea supported on activated carbons at low temperature]

Boosting Low-Temperature NH3-SCR Performance Via Mixed-Valence Cobalt Dual Active Sites

Promotional effect of aluminum doping on the sulfated Fe2O3 catalyst in selective catalytic reduction of NO with NH3

Optimization of Hybrid Crystal with SAPO-5/34 on Hydrothermal Stability for deNOx Reaction by NH3

Boosting the Catalytic Performance of Cu-SAPO-34 in NOx Removal Via Hydrothermal Treatment.

Effective reduction of nitric oxide over a core–shell Cu-SAPO-34@Fe-MOR zeolite catalyst

Optimizing Selective Catalytic Reduction of NO with NH3 on Fe2O3/WO3 Via Redox‐Acid Synergy

Improved NH3-SCR Denox Activity and Tolerance to H2O & SO2 at Low Temperature over the NbmCu0.1-mCe0.9Ox Catalysts: Role of Acidity by Niobium Doping

A novel highly active catalyst form CuFeMg layered double oxides for the selective catalytic reduction of NO by CO

Fundamental investigation on layered double hydroxides derived mixed metal oxides for selective catalytic reduction of NOx by H2

DRIFT Study of CuO-CeO₂-TiO₂ Mixed Oxides for NOx Reduction with NH₃ at Low Temperatures.