Abstract:Reverse engineering technology has been widely recognized as a crucial strategy for innovative design of products. However, currently one of major problems for its application is that huge amounts of digitized points cloud data need to be processed for geometrical surface modelling, especially for unknown free-form surfaces which are widely used in industry fields such as aircraft, automobile, shipbuilding, steam turbine, etc. In order to digitize unknown free-form surfaces accurately and efficiently, an adaptive sampling approach based on advanced path detecting has been presented. The method is characterized by integrating one touch- trigger probe and two laser probes onto the same Z axis of Coordinate Measuring Machine (CMM), and the two laser probes are located on both sides of the touch probe. During sampling, the CMM scans the free-form surface line by line. At the scanning direction, the laser probes are applied to collect the measuring path information in front of the touch probe. And the data acquired by the laser probes is processed and fitted into B-spline curves real-timely, and then the curvature feature of the measuring path is extracted. The obtained path information is used to generate a new measuring path for touch probe to achieve adaptive sampling. While at the cross-section feeding direction, curvature analysis algorithm based on the angle variation between measuring sections is employed to subdivide the cross-sections when needed. Repeating this procedure, the measuring sections will be distributed adaptively. Simulation and experiment results indicate that the sampling points generated by the touch probe are laid out rationally according to the curvature of the surfaces, therefore the sampling efficiency and accuracy can be improved significantly by the proposed approach.

Astigmatism-Based Displacement Sensing for Curved Optical Surfaces

Axial Nanodisplacement Measurement Based on Astigmatism Effect of Crossed Cylindrical Lenses.

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Research on Two Optical Methods for Aspheric Measurement

Non-contact adaptive sampling for unknown free-form surface based on double-probe integration

Digitalization of Unknown Free-Form Surface Based on Variable-Direction Point Laser Sensor

Full Area Covered 3D Profile Measurement of Special-Shaped Optics Based on a New Prototype Non-Contact Profiler.

An Adaptive Sampling Approach for Digitizing Unknown Free-form Surfaces Based on Advanced Path Detecting

A New Optical Angle Measurement and Compensation

Non-equidistant Scanning Path Generation for the Evaluation of Surface Curvature in Metrological Scanning Probe Microscopes

Surface Bilateral Profile Measurement of Curved Transparent Components Based on Chromatic Confocal Sensor

Chromatic Confocal Sensor-Based Sub-Aperture Scanning and Stitching for the Measurement of Microstructured Optical Surfaces.

A New Centering Method of the Measuring Probe for Spiral Scanning-Based Surface Profile Measurement Systems

Profile Measurements of Micro-Aspheric Surfaces Using an Air-Bearing Stylus with A Microprobe

Fiducial-aided Calibration of a Displacement Laser Probing System for In-Situ Measurement of Optical Freeform Surfaces on an Ultra-Precision Fly-Cutting Machine.

Measurement on a parabolic surface by quantitative shadow method in computer-controlled optical surfacing

Air Flow Turbulence Orthogonality and Surface Error Estimation in Large Aperture Optical Testing

Self-calibration of in Situ Monoscopic Deflectometric Measurement in Precision Optical Manufacturing.

Afm with the Slope Compensation Technique for High-Speed Precision Measurement of Micro-Structured Surfaces

Accurate Inner Profile Measurement of a High Aspect Ratio Aspheric Workpiece Using a Two-Probe Measuring System

Machine Vision and Data Reconstruction for Measuring Free Form Surface