Abstract:The dynamics of laser ablation of solid target with ultrashort intense laser pulses is not only fundamentally interesting, but also relevant to a few important applications such as microfabrication, laser propulsion, laser induced breakdown spectroscopy, etc. By use of time-resolved pump-probe shadowgraphic imaging technology, we study the dynamic process of laser ablation of a planar aluminum target in air. The incident laser pulses are from a Ti: sapphire femtosecond laser amplifier system with a duration of 50 fs, central wavelength of 800 nm, pulse energy varying between 4 mJ and 7 mJ. Time-resolved shadowgraphs of material ejection from the aluminum target are recorded at the time delay up to a few nanoseconds after laser irradiation. By changing the distance between the target and the focal point of the incident laser, we obtain the shadowgraphs of the target ejection under different laser spot sizes. When the laser spot size is relatively large say, over 1 mm, the irradiated target surface is ablated in the form of a planar shock. However, when the laser spot size is relatively small, the ejection appears in the form of a hemispherical blast wave. It is found that the hemispherical blast wave well conforms to the Sedov's blast wave theory. When the laser energy is relatively large, it is found that ionization of air has a great effect on laser ablation. Additional small ejections appear as columnar and hemispherical structures near the laser axis, which are superimposed on the large planar shock. These can be attributed to the following processes. Firstly, as the ionization of air occurs near the laser axis, effective heat transfer from air plasma to the aluminium target leads to enhanced target temperature. This leads to the formation of a columnar structure on a picosecond time scale. Secondly, the columnar ejection and air plasma expansion near the laser axis result in the decrease of air density and pressure, which leads to the formation of the hemispherical structure on a nanosecond time scale.

High efficiency femtosecond laser ablation of alumina ceramics under the filament induced plasma shock wave

Ablation characteristics of femtosecond laser on wide band-gap ceramics

Femtosecond Laser Ablation of an Aluminum Target in Air

Mechanisms of femtosecond laser ablation of Ni3Al: Molecular dynamics study

Enhancing the Expansion of a Plasma Shockwave by Crater-Induced Laser Refocusing in Femtosecond Laser Ablation of Fused Silica

Study of Femtosecond Ablation on Aluminum Film with 3D Two-Temperature Model and Experimental Verifications

Continuous GHz femtosecond laser interacting with aluminum film: Simulation and experiment

Experimental and numerical investigation on the ablation mechanism of Al2O3/Al2O3-CMCs under continuous-wave laser irradiation

Influence of Laser-Induced Air Breakdown on Femtosecond Laser Ablation of Aluminum.

Picosecond Laser Ablation of Millimeter-Wave Subwavelength Structures on Alumina and Sapphire

Physics of picosecond pulse laser ablation

Mechanisms In Fs-Laser Ablation In Fused Silica

Ultra-fast Diagnosis of Shock Waves and Plasma at Front and Rear Surfaces in the Bulk of Fused Silica Induced by an Nd:YAG Pulse Laser

Fundamental 3D simulation of the femtosecond laser ablation for cooling hole drilling on Ni and Fe based aero-engine components

Mechanism and optimization of femtosecond laser welding fused silica and aluminum

Study on Ablation Characteristics of Femyosecond Laser Nanoscale Processing for Aluminum Nitride and LeadZirconate Titanate Ceramics

Direct welding of diffuse alumina ceramics by ultrashort pulse laser

In-Situ Reaction Deposition Of Alumina Ceramic Film By Laser-Induced Vacuum Arc

Multiphysics modeling of femtosecond laser-copper interaction: from electron dynamics to plasma eruption

Experimental Study of Laser-Induced Plasma: Influence of Laser Fluence and Pulse Duration

Theoretical and experimental investigation on superhydrophobic structure fabricated by femtosecond laser on alumina ceramics