Abstract:Limited by stimulated Raman scattering (SRS), amplified spontaneous emission (ASE) and transverse mode instability (TMI), it is challenging to achieve high-power laser output in ytterbium-doped fiber (YDF) lasers with operating wavelengths less than 1060 nm. In high-power fiber lasers, bi-tapered YDF can provide a balance between the suppression of SRS and TMI. In this work, we designed and fabricated a new double-cladding asymmetric bi-tapered YDF to suppress ASE and SRS in the 1050 nm monolithic fiber laser. The asymmetric bi-tapered YDF has an input end with a core/cladding diameter of ~20/400 μm, a middle section with a core/cladding diameter of ~30/600 μm and an output end with a core/cladding diameter of ~25/500 μm. The working temperature of the non-wavelength-stabilized 976 nm laser diodes was optimized to improve the TMI threshold. An output power of over 5 kW with an efficiency of 83.1% and a beam quality factor M2 of about 1.47 were achieved. To the best of our knowledge, this represents the highest power nearly-single mode in 1050 nm fiber lasers. This work demonstrates the potential of asymmetric bi-tapered YDF for achieving a high-power laser with high beam quality in 1050 nm fiber lasers.

1178 J, 527 nm near diffraction limited laser based on a complete closed-loop adaptive optics controlled off-axis multi-pass amplification laser system

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

589 nm laser generation by frequency doubling of a single-frequency Raman fiber amplifier in PPSLT.

1.57 Times Diffraction-Limit High-Energy Laser Based on a Nd:YAG Slab Amplifier and an Adaptive Optics System

10.8 Kw, 2.6 Times Diffraction Limited Laser Based on a Continuous Wave Nd:YAG Oscillator and an Extra-Cavity Adaptive Optics System.

21.2 Kw, 1.94 Times Diffraction-Limit Quasi-Continuous-wave Laser Based on a Multi-Stage, Power-Scalable and Adaptive Optics Controlled Yb:YAG Master-Oscillator-power-amplifier System

A 102 W High-Power Linearly-Polarized All-Fiber Single-Frequency Laser at 1560 Nm

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

A 100 W-level ultra-narrow fiber-coupled 780 nm diode laser

4.115kW near diffraction-limited high quality fiber laser based on 25/400μm fiber

990 Nm High-Power High-Beam-Quality DFB Laser with Narrow Linewidth Controlled by Gain-Coupled Effect

Adaptive aberration correction of a 5 J/6.6 ns/200 Hz solid-state Nd:YAG laser.

100 J laser system with stimulated brillouin scattering phase conjugating mirror

316 W High-Brightness Narrow-Linewidth Linearly-Polarized All-Fiber Single-Frequency Laser at 1950 Nm

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

High efficient 120W 1018nm single-frequency narrow linewidth amplification based on wide-tunable DBR fiber seed source

260 fs, 403 W coherently combined fiber laser with precise high-order dispersion management

Kw-Level 1030 Nm Polarization-Maintained Fiber Laser with Narrow Linewidth and Near-Diffraction-limited Beam Quality.

Sub-60-fs, Compact 1100-Nm Fiber Laser System Based on Double-Pass Pre-Chirp Managed Amplification.

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

Robust single-frequency 589 nm fiber laser based on phase modulation and passive demodulation