Abstract:Grain-oriented silicon steel (GO FeSi) laminations are vital components for efficient energy conversion in electromagnetic devices. While traditionally optimized for power frequencies of 50/60 Hz, the pursuit of higher frequency operation (f ≥ 200 Hz) promises enhanced power density. This paper introduces a model for estimating GO FeSi laminations' magnetic behavior under these elevated operational frequencies. The proposed model combines the Maxwell diffusion equation and a material law derived from a fractional differential equation, capturing the viscoelastic characteristics of the magnetization process. Remarkably, the model's dynamical contribution, characterized by only two parameters, achieves a notable 4.8% Euclidean relative distance error across the frequency spectrum from 50 Hz to 1 kHz. The paper's initial section offers an exhaustive description of the model, featuring comprehensive comparisons between simulated and measured data. Subsequently, a methodology is presented for the localized segregation of magnetic losses into three conventional categories: hysteresis, classical, and excess, delineated across various tested frequencies. Further leveraging the model's predictive capabilities, the study extends to investigating the very high-frequency regime, elucidating the spatial distribution of loss contributions. The application of proportional–iterative learning control facilitates the model's adaptation to standard characterization conditions, employing sinusoidal imposed flux density. The paper deliberates on the implications of GO FeSi behavior under extreme operational conditions, offering insights and reflections essential for understanding and optimizing magnetic core performance in high-frequency applications.

Impact of GOES grade mixing on the iron losses of single-phase magnetic cores

Numerical modeling of magnetic cores with combined electrical steel grades

Study on Influence of Processing Methods on Loss Coefficients of Iron Loss Model

The Modelling Method of 2D Magnetic Properties of Grain-Oriented Electrical Steel Sheet

The Effect of Magnetic Anisotropy on the Computed Specific Total Loss in Electrical Steel

High-Frequency Fractional Predictions and Spatial Distribution of the Magnetic Loss in a Grain-Oriented Magnetic Steel Lamination

Iron Loss Separation in High Frequency Using Numerical Techniques

Modeling Magnetostriction of Grain-Oriented Sheet Steels Based on Magnetization Process and Domain Motion

Measurements of Iron Loss in PMSM Stator Cores Based on CoFe and SiFe Lamination Sheets and Stemmed From Different Manufacturing Processes

Influence of the stacking method on the iron losses in power transformer cores

Predicting Iron Losses in Laminated Steel with Given Non-Sinusoidal Waveforms of Flux Density

A Simplified Iron Loss Model for Laminated Magnetic Cores

Study of High-pressure Environments Effect on Iron Loss in Motors with Amorphous Alloy Core

Analysis of Magnetic Domain Structure of Grain-Oriented Electrical Steels Using Two-Dimensional Fourier Transform

Soft magnetic material degradation due to manufacturing process: A comparison of measurements and numerical simulations

Rotational Core Loss of Silicon Steel Laminations Based on Three-Dimensional Magnetic Properties Measurement

Empirical Implementation of the Steinmetz Equation to Compute Eddy Current Loss in Soft Magnetic Composite Components

A Knowledge-Based Analysis of Interlaminar Faults for Condition Monitoring of Magnetic Cores With Predominant Focus on Axial Offset Between the Fault Points

Comparison Study on SMC and Grain-Oriented Laminated Steel Core for Small-Size Axial Flux Permanent-Magnet Synchronous Machines

Analytical iron loss model for the optimization of magnetic gear

Simulation of AC Loss in Small HTS Coils with Iron Core