Abstract:Aluminum-doped zinc oxide (AZO) is a popular, low-cost, nontoxic material that finds application as a transparent conducting electrode in photonic, sensing, and photovoltaic devices. We report the AZO thin films with a high figure of merit on large-area glass substrates by direct current magnetron sputtering without any intentional substrate heating. Furthermore, a simple thermal post-treatment to improve the transmittance of AZO thin film in the infrared region for its application in low-band-gap devices is presented. High optoelectronic properties are obtained by optimizing oxygen content during the sputtering process. The structural, morphological, optoelectrical, and photoluminescence characterization of cold sputtered AZO films is investigated for its latent applications. AZO thin films with an electrical sheet resistance of 8.8 Ω/□ and a visible light transmittance of 78.5% with thickness uniformity above 95% are achieved on 300 mm × 300 mm glass substrate. The AZO film with optimized process conditions is employed as a transparent electrode to fabricate a copper-indium-gallium-selenide-based thin film solar cell, demonstrating 11.8% power conversion efficiency. The AZO film with optimized sputter conditions was post-treated in ambient conditions with an Al blanket to suppress the resistivity by proper organization of the defects due to Al consumption and point defects, resulting in improved transparency (85%) in the infrared region with a sheet resistance of 40 Ω/□. This has great potential for developing scalable and low-cost AZO thin films for transparent electrodes in a wide range of the spectrum.

Al-delta-doped ZnO films made by atomic layer deposition and flash-lamp annealing for low-emissivity coating

Deposition and Characterization of AZO Thin Films on Flexible Glass Substrates Using DC Magnetron Sputtering Technique

Surface Topography and Optical Properties of Al-doped ZnO Thin Films by Sol-gel Process

Optical Properties of Al-Doped ZnO Films in the Infrared Region and Their Absorption Applications

Effect of Film Thickness on Properties of Al-Doped Zno Film As Transparent Conducting Electrodes in Oleds

Highly Transparent Conductive and Near-Infrared Reflective Zno:Al Thin Films

Optical and Electrical Properties of Al-doped ZnO Thin Films by Atomic Layer Deposition

Atomic layer deposition of Al-doped ZnO films using aluminum isopropoxide as the Al precursor

Optical Properties of Al-doped ZnO Thin Films by Ellipsometry

Studies on Morphology, Electrical and Optical Characteristics of Al-doped ZnO Thin Films Grown by Atomic Layer Deposition

Characteristics of Atomic Layer Deposited Transparent Aluminum-Doped Zinc Oxide Thin Films at Low Temperature

The enhancement of thermal endurance in doped low emissive ZnO/Ag/ZnO multilayer thin film

Transparent Conductive Al-Doped Zno Thin Films Grown at Room Temperature

A Comparative Study of Growth and Properties of Atomic Layer Deposited Transparent Conductive Oxide of Al Doped ZnO Films from Different Al Precursors

Highly transparent and conductive Al-doped ZnO films synthesized by pulsed laser co-ablation of Zn and Al targets assisted by oxygen plasma

Enhanced Electrical Properties of AZO/IZO Multilayered Thin Film with Post Laser Annealing Process

Preparation of Al-doped Zinc Oxide (ZAO) Thin Film by Sol-Gel Process and Its Near-Infrared Reflective Properties

Tailoring of Optical and Electrical Properties of Transparent and Conductive Al-doped ZnO Films by Adjustment of Al Concentration

High Quality Al‐doped ZnO Thin Films Deposited Using Targets Prepared by Chemical Coprecipitation

Semiconducting properties of Al doped ZnO thin films

Room Temperature Sputtered Aluminum-Doped ZnO Thin Film Transparent Electrode for Application in Solar Cells and for Low-Band-Gap Optoelectronic Devices